2 layers79 × 38 mm
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
111 parts587
2 layers69 × 53.8 mm
Tmc2209 devboard
Jason-sketch729/master2209_devboard-tmcmaster2209_devboard-tmc
- Size
- 69 × 53.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 49
- Pads
- 144
- Tracks, vias
- 275, 168
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Oct 2026
- Updated
- 28 Oct 2026
Overview
Tmc2209 devboard is an open-source printed circuit board by Jason-sketch729, from the Jason-sketch729/master2209_devboard-tmc repository on GitHub. It is a 2-layer board of 69 × 53.8 mm with 37 parts on 49 nets, routed with 275 tracks and 168 vias.
It is built around the TMC2209-LA. Its parts include 13 resistors, 8 capacitors, 5 connectors, 3 diodes and 1 IC. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
readme.mdmaster2209_devboard-tmc
master2209_devboard-tmc is a project containing 130 files.
Project structure
master2209_devboard-tmc/
.github/
FUNDING.yml
code/
simple_drive_example/
simple_drive_example.ino
hardware/
version100/
3d_files/
.DS_Store
TMC2209.STEP
TS-1187A.step
XT30PW-M_pcb.stp
components/
.DS_Store
QFN50P500X500X90-29N.kicad_mod
TMC2209-LA.kicad_mod
TMC2209-LA.kicad_sym
production/
tmc2209_devboard-B_Cu.gbr
tmc2209_devboard-B_Mask.gbr
tmc2209_devboard-B_Paste.gbr
tmc2209_devboard-B_Silkscreen.gbr
tmc2209_devboard-bottom-pos.csvParts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R33k | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R9, R13 |
| 4 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | C100nF | Capacitor_SMD:C_0805_2012Metric | C1, C5, C7 |
| 3 | motor_conn | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J4, J5, J6 |
| 2 | R100mOHM | Resistor_SMD:R_2010_5025Metric | R11, R12 |
| 2 | R10k | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 1 | Arduino_UNO_R2 | Module:Arduino_UNO_R2_WithMountingHoles | A1 |
| 1 | C10uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | C2.2-4.7uF ceramic | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | C22nF 50V | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | C4.7uF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | C_330uF | Capacitor_SMD:CP_Elec_10x10 | C4 |
| 1 | Conn_01x02_Male | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | D_TVS_30V | Diode_SMD:D_SOD-123 | D1 |
| 1 | D_TVS_5V | Diode_SMD:D_SOD-123 | D3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | R1k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | R2k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | R330 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP5 |
| 1 | TMC2209-LA | components:QFN50P500X500X90-29N | U1 |
Similar boards
- 4 layers42 × 42 mm
- 4 layers53 × 40 mm
- 6 layers105 × 70 mm
- 4 layers358 × 40 mm
Longboi
KungfuPancake/longboi
Possibly the longest controller board to control the BoxTurtle AFC
297 parts7Apache-2.0 - 2 layers49.6 × 43.6 mm
A1-Toolhead Board
DevCyclonekitten/Bambu-A1-Klipper
A repository about the development of modifying a bambu labs a1 printer to run on klipper
74 parts4GPL-3.0 - 2 layers80 × 25 mm
OpenSmartFocuser
jayjar291/OpenSmartFocuser
OpenSmartFocuser is an open-source telescope focuser project with: - ESP32-S3 firmware (display/menu, motor control, serial command handling) - an INDI driver scaffold for host-side integration - hardware design files…
9 parts4 - 4 layers46.8 × 52.4 mm
Questions
How big is the Tmc2209 devboard PCB?
It measures 69 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tmc2209 devboard use?
37 parts, built around the TMC2209-LA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tmc2209 devboard KiCad files?
From the Jason-sketch729/master2209_devboard-tmc repository on GitHub, at the commit this page was made from: the board is hardware/version100/tmc2209_devboard.kicad_pcb and its schematic hardware/version100/tmc2209_devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tmc2209 devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jason-sketch729 before reusing the design.