

ESP32-Custom Development Board PCB Design
- Size
- 80 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 91
- Pads
- 298
- Tracks, vias
- 565, 199
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Dec 2025
- Updated
- 27 Dec 2025
Overview
ESP32-Custom Development Board PCB Design is an open-source printed circuit board by jayatharshan12-design, from the jayatharshan12-design/ESP32-Custom-Development-Board-PCB-Design repository on GitHub. It is a 4-layer board of 80 × 80 mm with 63 parts on 91 nets, routed with 565 tracks and 199 vias.
It is built around the 74AHCT245D, CP2104EK and ESP32-WROOM-32D, with the SI7021-A20-GM, USBLC6-2P6 and BC817 among its other parts. Its parts include 20 resistors, 16 capacitors, 6 ICs, 6 connectors and 4 diodes. It belongs with the microcontroller boards boards and the ESP32 and RISC-V boards of this library.
Main components
1074AHCT245D
SOIC-20-300mil-40℃~+125℃ 1 11ns@5.5V,50pF 4.5V~5.5V 74AHCT 8 80uA 8mA 8mA Bidirectional TTL-compatible CMOS Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversCP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion ModulesESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesSI7021-A20-GM
DFN-6-EP(3x3)DFN-6-EP(3x3) Temperature and Humidity Sensor ROHSSilicon LabsTemperature And Humidity SensorUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BLM21PG221SH1
08051 220Ω@100MHz 2A 45mΩ ±25% 0805 Ferrite Beads ROHSMurataFerrite BeadsLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesRT314A05
插件-40℃~+85℃ 10ms 10ms 16A 400V@AC 5V AgNi One set changeover: 1C (SPDT - changeover) Single Coil 插件 Magnetic Latching Relays ROHSTE ConnectivityMagnetic Latching RelaysUMH3N
SOT-363-55℃~+150℃ 0.5uA 100 100mA 150mW 2 NPN (Pre-Biased) 250MHz 300mV 50V 5V 6.11kΩ NPN SOT-363 Digital Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Digital Transistors
README
README.mdESP32-Custom-Development-Board-PCB-Design
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C5, C8, C11, C12, C13, C15 |
| 6 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6, R7, R12, R14 |
| 6 | 22R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R11, R17, R18, R19, R20 |
| 6 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C9, C10, C14 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R8, R9, R16 |
| 3 | Hole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H4 |
| 2 | 4K7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R15 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3 |
| 1 | 1000u/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C16 |
| 1 | 74AHCT245 | Package_DIP:DIP-20_W7.62mm | U5 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BLM21PG221 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J6 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U4 |
| 1 | Fuse | 00_morten_Library:FUSE_696105003002 | F2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | Hole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965 | H3 |
| 1 | LED_RGBA | LED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D1 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF | D4 |
| 1 | Polyfuse 1A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | RT314A05 | Relay_THT:Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm | K1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal | J3 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_Horizontal | J5 |
| 1 | Si7021-A20 | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U6 |
| 1 | TLV1117LV-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
Similar boards
- 4 layers100 × 100 mm

- 4 layers100 × 80 mm

ESP32
Tanmayeers/Projects
Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms
63 parts1 - 4 layers104.1 × 61 mm

Bigtest
YusufAlghoneimy/ESP32-PCB-Design
Youtube PCB reference: made by morten (https://www.youtube.com/watch?v=b-7bMl6fJio&t=8320s)
59 parts - 4 layers85 × 65 mm

- 4 layers92 × 88 mm

IOT
Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.
63 parts1 - 4 layers82.5 × 78.7 mm

ESP WROOM 32D
Pyisoe-Thame/ESP_WROOM_32D
This repository contains files and designs created while following a YouTube tutorial on KiCad. The ESP-WROOM-32D is the same chip used in NodeMCU-32S development board.
64 parts - 6 layers100 × 50 mm

Archive
sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.
92 parts12GPL-3.0 - 2 layers113 × 116.5 mm

Pregnancy tester
divquan/embedded-system-designs
This repository contains designs for embedded systems, including schematics, PCB layouts, and fabrication files. Ideal for learning and project inspiration.
52 partsMIT
Questions
How big is the ESP32-Custom Development Board PCB Design PCB?
It measures 80 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32-Custom Development Board PCB Design use?
63 parts, built around the 74AHCT245D, CP2104EK, ESP32-WROOM-32D and SI7021-A20-GM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-Custom Development Board PCB Design KiCad files?
From the jayatharshan12-design/ESP32-Custom-Development-Board-PCB-Design repository on GitHub, at the commit this page was made from: the board is 1.kicad_pcb and its schematic 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-Custom Development Board PCB Design design in my own project?
Its repository states no licence, so its author keeps all rights: ask jayatharshan12-design before reusing the design.