2 layers66 × 40 mm
Transimpedance Amplifier
Tanmayeers/Projects
Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms
21 parts1
4 layers100 × 80 mm
ESP32
Tanmayeers/Projects1Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms
- Size
- 100 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 91
- Pads
- 322
- Tracks, vias
- 520, 159
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jun 2025
- Updated
- 10 Aug 2026
Overview
ESP32 is an open-source printed circuit board by Tanmayeers, from the Tanmayeers/Projects repository on GitHub. It is a 4-layer board of 100 × 80 mm with 63 parts on 91 nets, routed with 520 tracks and 159 vias.
It is built around the 74AHCT245D, CP2104EK and ESP32-WROOM-32D, with the SI7021-A20-GM, LM1117DT-3.3 and USBLC6-2P6 among its other parts. Its parts include 20 resistors, 16 capacitors, 6 ICs, 6 connectors and 4 diodes. It belongs with the ESP32 boards of this library.
Main components
11
74AHCT245D
SOIC-20-300mil-40℃~+125℃ 1 11ns@5.5V,50pF 4.5V~5.5V 74AHCT 8 80uA 8mA 8mA Bidirectional TTL-compatible CMOS Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversCP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion Modules
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
SI7021-A20-GM
DFN-6-EP(3x3)DFN-6-EP(3x3) Temperature and Humidity Sensor ROHSSilicon LabsTemperature And Humidity Sensor
LM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
BLM21PG221SH1
08051 220Ω@100MHz 2A 45mΩ ±25% 0805 Ferrite Beads ROHSMurataFerrite Beads
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
RT314A05
插件-40℃~+85℃ 10ms 10ms 16A 400V@AC 5V AgNi One set changeover: 1C (SPDT - changeover) Single Coil 插件 Magnetic Latching Relays ROHSTE ConnectivityMagnetic Latching Relays
UMH3N
SOT-363-55℃~+150℃ 0.5uA 100 100mA 150mW 2 NPN (Pre-Biased) 250MHz 300mV 50V 5V 6.11kΩ NPN SOT-363 Digital Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Digital Transistors
README
PCB - Projects/Transimpedance Amplifier/README.mdTransimpedance Amplifier with Photodiodes
Specifications:
- Operting Voltage: 9V
- Operating Current: 200mA
- Output Voltage Swing: 6.5V
- 3dB - Bandwidth: 100 ± 10 Hz
- Noise: 5.406mVrms
Components used:
- Double operational amplifier - LMC 6482 N
- Precision Virtual Ground - TLE 2425
- Photodiodes: SFH 229, BPW 21
- 9V-Battery, Connectors, R, C
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C5, C10, C12, C13, C14, C16 |
| 6 | 1K | Resistor_SMD:R_0402_1005Metric | R6, R8, R9, R10, R14, R15 |
| 6 | 22R | Resistor_SMD:R_0402_1005Metric | R4, R5, R16, R17, R18, R19 |
| 6 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C6, C8, C9, C11, C15 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R7, R13, R20 |
| 3 | Hole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H4 |
| 2 | 4K7 | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C3, C7 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 1000u/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 3.3V INDICATOR | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | 74AHCT245 | Package_DIP:DIP-20_W7.62mm | U5 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BLM21PG221 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | Fuse | Fuse:Fuse_Littelfuse-LVR200 | F1 |
| 1 | Hole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965 | H3 |
| 1 | LED_RGBA | LED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D3 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF | D1 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U6 |
| 1 | Polyfuse_1A | Fuse:Fuse_Bourns_MF-RG300 | F2 |
| 1 | RT314A05 | Relay_THT:Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm | K1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal | J3 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_Horizontal | J4 |
| 1 | Si7021-A20 | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U4 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D2 |
More from Tanmayeers/Projects
1Similar boards
- 4 layers100 × 100 mm
- 4 layers80 × 80 mm
ESP32-Custom Development Board PCB Design
jayatharshan12-design/ESP32-Custom-Development-Board-PCB-Design
63 parts - 4 layers104.1 × 61 mm
Bigtest
YusufAlghoneimy/ESP32-PCB-Design
Youtube PCB reference: made by morten (https://www.youtube.com/watch?v=b-7bMl6fJio&t=8320s)
59 parts - 4 layers85 × 65 mm
- 4 layers92 × 88 mm
IOT
Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.
63 parts1 - 4 layers82.5 × 78.7 mm
ESP WROOM 32D
Pyisoe-Thame/ESP_WROOM_32D
This repository contains files and designs created while following a YouTube tutorial on KiCad. The ESP-WROOM-32D is the same chip used in NodeMCU-32S development board.
64 parts - 6 layers100 × 50 mm
Archive
sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.
92 parts12GPL-3.0 - 2 layers113 × 116.5 mm
Pregnancy tester
divquan/embedded-system-designs
This repository contains designs for embedded systems, including schematics, PCB layouts, and fabrication files. Ideal for learning and project inspiration.
52 partsMIT
Questions
How big is the ESP32 PCB?
It measures 100 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32 use?
63 parts, built around the 74AHCT245D, CP2104EK, ESP32-WROOM-32D and SI7021-A20-GM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 KiCad files?
From the Tanmayeers/Projects repository on GitHub, at the commit this page was made from: the board is PCB - Projects/ESP32/ESP32.kicad_pcb and its schematic PCB - Projects/ESP32/ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tanmayeers before reusing the design.