Skip to the content
1223

LM1117DT-3.3

Texas InstrumentsExtended

0℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM1117DT-3.3
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252
Pins
3
In stock
636 at JLCPCB (C969102)
Used on
114 open-source boards

Overview

The LM1117DT-3.3 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a TO-252 package with 3 pins. 0℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LM1117DT-3.3, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-252-3_TabPin2, from KiCad's library), ready for a KiCad board. 636 are in stock at JLCPCB (part C969102). 114 open-source boards in 95 repositories on GitHub use it.

Symbol

1GND2VO3VI
Regulator_Linear:LM1117DT-3.3From KiCad's library

Footprint

1223
Package_TO_SOT_SMD:TO-252-3_TabPin2From KiCad's library

Pinout

3
The pins of the LM1117DT-3.3
PinNameType
1GNDPower in
2VOPower out
3VIPower in

Open-source boards using it

114See all 114
  • 2 layers78 × 84 mmLC meter, the printed circuit board in 3D

    LC meter

    schuyler4/LCR_Meter

    An LCR meter design.

    93 parts6MIT
  • 2 layers55 × 55 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    Deni90/singleDigitNixieClock

    A small project that combines ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and…

    39 parts5MIT
  • 2 layers139.7 × 114.3 mmSelf balancing robot, the printed circuit board in 3D

    Self balancing robot

    K0nradG/self-balancing-robot

    Self-balancing robot powered by nRF52840 and Zephyr RTOS, with BLE control, OTA updates, and a Raspberry Pi camera interface designed for future autonomous navigation.

    36 parts4Apache-2.0
  • 2 layers99.8 × 60.2 mmIrrigation IoT, the printed circuit board in 3D

    Irrigation IoT

    VictorRavani/Irrigation_IoT

    This project covers the complete development of Hardware and Firmware for IoT-based supervisory control. It offers all the necessary information and resources so that anyone can set up the system independently.

    79 parts4MIT
  • 4 layers70 × 70 mmInverter KiCAD, the printed circuit board in 3D

    Inverter KiCAD

    AresEnsea/2425_Projet2A_AresCFR

    Ce repository GitHub regroupe l'ensemble des projets & documents réalisés par l'association Ares pour la Coupe de France de Robotique 2025

    104 parts3
  • 2 layers87.6 × 63.2 mmTip Etcher, the printed circuit board in 3D

    Tip Etcher

    KN-NaMi/Tip-Etcher

    Tip Etcher

    89 parts3
  • 4 layers100 × 40 mmVESX, the printed circuit board in 3D

    VESX

    NormalHuman-Anything/VESX

    V(ESC)ESX

    183 parts3CERN-OHL-W-2.0
  • 4 layers60 × 60 mmPojet 1A, the printed circuit board in 3D

    Pojet 1A

    Kennystflr/Lightning-speaker

    Design of the electronic board for a speaker.

    178 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM1117DT-3.3?

Yes. The symbol is Regulator_Linear:LM1117DT-3.3 and the footprint Package_TO_SOT_SMD:TO-252-3_TabPin2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM1117DT-3.3?

TO-252, with 3 pins. Its footprint is drawn on this page.

Where is the LM1117DT-3.3 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM1117DT-3.3?

JLCPCB lists it as part C969102, with 636 in stock; the sellers' links on this page open their listings.

What can replace the LM1117DT-3.3?

Parts like it in the library: the AMS1117CD-3.3 by Advanced Monolithic Systems, the LD39150DT33-R by STMicroelectronics, the LP38690DTX-3.3 by Texas Instruments and the AMS1117CD-3.3 by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM1117DT-3.3?

114 boards in 95 repositories on GitHub; the most starred are listed on this page, with their KiCad files.