
IOT
Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.

This repository contains files and designs created while following a YouTube tutorial on KiCad. The ESP-WROOM-32D is the same chip used in NodeMCU-32S development board.
ESP WROOM 32D is an open-source printed circuit board by Pyisoe-Thame, from the Pyisoe-Thame/ESP_WROOM_32D repository on GitHub. It is a 4-layer board of 82.5 × 78.7 mm with 64 parts on 92 nets, routed with 414 tracks and 58 vias.
It is built around the 74HC245D, CP2104EK and ESP32-WROOM-32D, with the SI7021-A20-GM, USBLC6-2P6 and BC817 among its other parts. Its parts include 20 resistors, 16 capacitors, 6 ICs, 6 connectors and 4 diodes. It belongs with the ESP32 boards of this library.
This repository contains files and designs created while following a YouTube tutorial on KiCad. The ESP-WROOM-32D is the same chip used in NodeMCU-32S development board. So, it is good to have touched this module in a learning curve.
The designs in this project are based on the tutorial available at the following link:
YouTube Tutorial
The final PCB design in the project is the result of a learning endevor and neither tested practically nor optimized for production use. Users must do double-check on designs, components, and connections for safety and functionality. Afterall the main purpose of this project is for the same-interest fellows to observe, make comments and elaborate ideas or collaborate into their own projects.
This project is dedicated to the public domain under the Unlicense. You can do whatever you want with it, including modifying, distributing, and using it for any purpose, without restriction.
See the Unlicense for more details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C4, C5, C9, C13, C14, C16 |
| 7 | 22R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R6, R7, R8, R9, R18, R19 |
| 6 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C7, C8, C12, C15 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R14, R17, R20 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R13 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R11 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R16 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 1 | 1000u/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C6 |
| 1 | 130R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 47R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 74HC245 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U3 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BLM21PG221 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | Conn_I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | EN | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U6 |
| 1 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Keystone_3517_Inline_P23.11x6.76mm_D1.70mm_Horizontal | F1 |
| 1 | LED_RGBA | LED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D1 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF | D4 |
| 1 | Polyfuse 1A | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F2 |
| 1 | Power input | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | RT314A05 | Relay_THT:Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm | K1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J5 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J1 |
| 1 | Si7021-A20 | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U2 |
| 1 | TLV1117LV33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4 |

Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.


Tanmayeers/Projects
Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms

jayatharshan12-design/ESP32-Custom-Development-Board-PCB-Design

YusufAlghoneimy/ESP32-PCB-Design
Youtube PCB reference: made by morten (https://www.youtube.com/watch?v=b-7bMl6fJio&t=8320s)


sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.

divquan/embedded-system-designs
This repository contains designs for embedded systems, including schematics, PCB layouts, and fabrication files. Ideal for learning and project inspiration.
It measures 82.5 × 78.7 mm and has 4 copper layers, 1.6 mm thick.
64 parts, built around the 74HC245D, CP2104EK, ESP32-WROOM-32D and SI7021-A20-GM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pyisoe-Thame/ESP_WROOM_32D repository on GitHub, at the commit this page was made from: the board is ESP_WROOM_32D.kicad_pcb and its schematic ESP_WROOM_32D.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pyisoe-Thame before reusing the design.