2 layers33 × 58.8 mm
2 layers
PIC16F690 Development Board
jacob7395/Leak_Rate- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 24
- Pads
- 69
- Tracks, vias
- 208, 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Aug 2016
- Updated
- 12 Oct 2016
Overview
PIC16F690 Development Board is an open-source printed circuit board by jacob7395, from the jacob7395/Leak_Rate repository on GitHub. It is a 2-layer board with 20 parts on 24 nets, routed with 208 tracks and 6 vias.
It is built around the PIC16F690-I/P and LM7805CT. Its parts include 6 capacitors, 4 connectors, 2 resistors, 2 ICs and 2 diodes. It belongs with the microcontroller boards boards and the PIC boards of this library.
Main components
2
PIC16F690-I/P
DIP-20-40℃~+85℃ 10bit 18 20MHz 256Byte 256Byte 2V~5.5V 7KB 8 Bit Built-in FLASH PIC DIP-20 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM7805CT
TO-2200℃~+70℃@(Ta) 1 1A 20V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | DRM_KiCad_Library:Capacitor_02_Single_Sided | C4, C5 |
| 2 | 10uF 16V | DRM_KiCad_Library:Capacitor_Electrolytic_Small_Single_Sided | C3, C6 |
| 2 | 22pF | DRM_KiCad_Library:Capacitor_01_Single_Sided | C1, C2 |
| 1 | 10K | DRM_KiCad_Library:Resistor_Single_Sided | R1 |
| 1 | 1K | DRM_KiCad_Library:Resistor_Single_Sided | R2 |
| 1 | 2 Way Terminal | DRM_KiCad_Library:Terminal_2W_Single_Sided | P2 |
| 1 | 20MHz | DRM_KiCad_Library:Crystal_HC49_Single_Sided | Y1 |
| 1 | IN4001 | DRM_KiCad_Library:Diode_Single_Sided | D1 |
| 1 | ISP Header | DRM_KiCad_Library:Header_6W_Single_Sided | P1 |
| 1 | LED RED 3mm | DRM_KiCad_Library:LED_3mm_Single_Sided | D2 |
| 1 | LM7805CT | DRM_KiCad_Library:7805_TO220_Single_Sided | IC2 |
| 1 | PIC16F690 | DRM_KiCad_Library:DIL_20_Single_Sided | IC1 |
| 1 | Port B | DRM_KiCad_Library:Header_4W_Single_Sided | P3 |
| 1 | Port C | DRM_KiCad_Library:Header_8W_Single_Sided | P4 |
The 17 most common of 20 parts.
Similar boards
- 2 layers173 × 85 mm
Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 2 layers169.3 × 128 mm
PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers97.6 × 145.1 mm
Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 4 layers100 × 100 mm
- 2 layers68 × 89 mm
ParanoiaBox
profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device
60 parts17 - 2 layers100 × 49.7 mm
Questions
What parts does the PIC16F690 Development Board use?
20 parts, built around the PIC16F690-I/P and LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC16F690 Development Board KiCad files?
From the jacob7395/Leak_Rate repository on GitHub, at the commit this page was made from: the board is Scematics/PIC16F690 Development Board/PIC16F690 Development Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC16F690 Development Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask jacob7395 before reusing the design.