

Analog and ad9958
Vector Network Analyzer 10 KHz - 180 MHz
- Size
- 97.6 × 145.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 226
- Nets
- 128
- Pads
- 656
- Tracks, vias
- 1,915, 274
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Aug 2018
- Updated
- 2 Sep 2018
Overview
Analog and ad9958 is an open-source printed circuit board by balmerdx, from the balmerdx/BalmerDX_VNA repository on GitHub, published under the BSD-2-Clause licence. It is a 4-layer board of 97.6 × 145.1 mm with 226 parts on 128 nets, routed with 1,915 tracks and 274 vias.
It is built around the SA612AD/01, CP2102 and EL5166IS, with the LM2663M, ADG736BRM and LM7805CT among its other parts. Its parts include 94 capacitors, 73 resistors, 21 ICs, 14 inductors and 6 connectors.
Main components
8SA612AD/01
SO-8-13dBm -40℃~+85℃ 17dB 2.4mA 4.5V~8V 5dB SO-8 RF Mixers ROHSNXP SemiconductorsRF MixersCP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion ModulesEL5166IS
SOIC-8-40℃~+85℃ 1 200mA 3.52uV/℃ 500uV 57dB 6V/ns 8.5mA 8.5uA Enable/shutdown function SOIC-8 Operational AmplifierELANTECOperational AmplifierLM2663M
SOIC-8-40℃~+85℃ 2.5V~5.5V 200mA 3.5Ω 75kHz 800uA 96% Inverted、boost converter Not supported SOIC-8 Charge Pumps ROHSTexas InstrumentsDC-DC ConvertersADG736BRM
MSOP10CMOS, 2.5 Ohms Low Voltage, Dual SPDT SwitchAnalog DevicesUncategorisedLM7805CT
TO-2200℃~+70℃@(Ta) 1 1A 20V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS79318DBV
SOT-23-5-40℃~+150℃ 1 1.8V 200mA 220uA 43dB@(100kHz)、70dB@(100Hz) 5.5V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsHT7333
SOT-89-40℃~+85℃ 1 1.5uA 20V 3.3V 300mA 300mV@(100mA) Fixed Positive Short Circuit Protection SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMinosVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdParts
226| Qty | Value | Footprint | References |
|---|---|---|---|
| 41 | 100n | Capacitors_SMD:C_0603 | C10, C11, C12, C22, C23, C24, C25, C26, C27, C28, C29, C30, C32, C33, C36, C37 +25 |
| 10 | 1u | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C5, C6, C7, C8, C9, C92 |
| 6 | 22n | Capacitors_SMD:C_0603 | C16, C17, C18, C19, C20, C21 |
| 6 | 27k | Resistors_SMD:R_0603 | R27, R28, R32, R33, R37, R38 |
| 6 | 30 | Resistors_SMD:R_0603 | R65, R66, R70, R71, R72, R73 |
| 6 | 3K9 | Resistors_SMD:R_0603 | R21, R22, R23, R24, R25, R26 |
| 6 | 49.9 | Resistors_SMD:R_0603 | R1, R6, R7, R18, R46, R47 |
| 5 | 100Z | Capacitors_SMD:C_0805 | L10, L11, L12, L13, L14 |
| 4 | 180 | Resistors_SMD:R_0603 | R52, R53, R54, R55 |
| 4 | 18p | Resistors_SMD:R_0805 | C55, C56, C57, C58 |
| 4 | 22nH | Resistors_SMD:R_0805_HandSoldering | L6, L7, L8, L9 |
| 4 | 22p | Resistors_SMD:R_0805 | C59, C60, C61, C62 |
| 4 | 27p | Resistors_SMD:R_0805 | C42, C43, C44, C45 |
| 4 | 330k | Resistors_SMD:R_0603 | R35, R36, R40, R41 |
| 4 | 33p | Resistors_SMD:R_0805 | C50, C51, C52, C53 |
| 4 | 360 | Resistors_SMD:R_0603 | R48, R49, R50, R51 |
| 4 | 39nH | Resistors_SMD:R_0805_HandSoldering | L2, L3, L4, L5 |
| 4 | 4.7p | Resistors_SMD:R_0805 | C46, C47, C48, C49 |
| 4 | 52 | Resistors_SMD:R_0603 | R56, R57, R58, R59 |
| 4 | inf | Resistors_SMD:R_0603 | R61, R62, R63, R64 |
| 3 | 100p | Capacitors_SMD:C_0603 | C13, C14, C15 |
| 3 | 10u | Capacitors_SMD:C_0805 | C75, C76, C77 |
| 3 | 220u | Capacitors_SMD:c_elec_6.3x4.5 | C31, C84, C89 |
| 3 | 33 | Resistors_SMD:R_0603 | R4, R5, R10 |
| 3 | 47u 10V | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_HandSoldering | C81, C86, C96 |
| 3 | 82 | Resistors_SMD:R_0603 | R12, R13, R17 |
| 3 | ADG736 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | IC1, IC2, IC3 |
| 3 | SA612A | SMD_Packages:SOIC-8-N | U1, U2, U3 |
| 3 | TS462 | SMD_Packages:SOIC-8-N | U4, U5, U6 |
| 2 | 100 | Resistors_SMD:R_0603 | R2, R43 |
| 2 | 10k | Resistors_SMD:R_0603 | R34, R42 |
| 2 | 33 | Resistors_SMD:R_0805 | R19, R20 |
| 2 | 33u | Capacitors_SMD:c_elec_6.3x4.5 | C35, C87 |
| 2 | 510 | Resistors_SMD:R_0603 | R14, R16 |
| 2 | 5k1 | Resistors_SMD:R_0603 | R44, R45 |
| 2 | 68 | Resistors_SMD:R_0805 | R9, R15 |
| 2 | 68k | Resistors_SMD:R_0603 | R30, R31 |
| 2 | EL5166 | TO_SOT_Packages_SMD:SOT-23-6 | U7, U8 |
| 2 | LM7805CT | Power_Integrations:TO-220 | U14, U17 |
| 2 | SMA | balmer:SMA-NORMAL-MY | X5, X6 |
| 2 | TPS79318 | TO_SOT_Packages_SMD:SOT-23-5 | U11, U12 |
| 2 | balmer | balmer:balmer_logo | balmer_logo, balmer_logo |
| 1 | +9V | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | 100u | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | L1 |
| 1 | 150 | Resistors_SMD:R_0603 | R3 |
| 1 | 15k | Resistors_SMD:R_0603 | R29 |
| 1 | 160 | Resistors_SMD:R_0603 | R68 |
| 1 | 18 | Resistors_SMD:R_0603 | R8 |
| 1 | 1n | Capacitors_SMD:C_0603 | C34 |
| 1 | 2.2u | Capacitors_SMD:C_0805 | C94 |
| 1 | 22k | Resistors_SMD:R_0603 | R39 |
| 1 | 25MHz | balmer:Crystal_5.0x3.2mm | U9 |
| 1 | 270 | Resistors_SMD:R_0603 | R11 |
| 1 | 2k | Resistors_SMD:R_0603 | R69 |
| 1 | 3k | Resistors_SMD:R_Array_Concave_4x0402 | RN2 |
| 1 | 4.7 | Resistors_SMD:R_0603 | R60 |
| 1 | 470 | Resistors_SMD:R_0603 | R67 |
| 1 | 680p | Capacitors_SMD:C_0603 | C66 |
| 1 | AD9958 | balmer:CP-56-1 | U10 |
| 1 | CONN_RF | balmer:IDC_08M | P1 |
| 1 | CP2102 | balmer:MLP-28 | U18 |
| 1 | DATA | balmer:IDC_08M | P2 |
| 1 | HT7333 | TO_SOT_Packages_SMD:SOT89-3_Housing | U13 |
| 1 | LM2663 | SMD_Packages:SOIC-8-N | U16 |
| 1 | LO_DDS | balmer:SMA-NORMAL-MY | X4 |
| 1 | POUT | Pin_Headers:Pin_Header_Straight_1x04 | P5 |
| 1 | RF_DDS | balmer:SMA-NORMAL-MY | X3 |
| 1 | RX | balmer:SMA-NORMAL | X1 |
| 1 | SG053-SZ | balmer:SG053-SZ | U15 |
| 1 | TX | balmer:SMA-NORMAL | X2 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x04 | P6 |
| 1 | USB | Pin_Headers:Pin_Header_Straight_1x04 | P4 |
The 217 most common of 226 parts.
More from balmerdx/BalmerDX_VNA
2- 2 layers65.7 × 50 mm

- 2 layers70 × 50 mm

Rot enc and power
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
19 parts26BSD-2-Clause
Similar boards
- 2 layers68.6 × 53.4 mm

AnalogShield-01
wolfgangfriedrich/AnalogShield-01
Arduino Schield Pixi Analog I/O 20channel KiCAD design files
74 parts1 - 2 layers90 × 144.6 mm

- 2 layers118 × 50 mm

- 2 layers80 × 65 mm

- 2 layers43 × 26 mm

Cheddar
tperale/cheddar
:satellite: A ESP8266 connected button like the Amazon Dash but programmable
30 parts10CC-BY-SA-4.0 - 2 layers70 × 44 mm

- 2 layers66 × 57 mm

- 2 layers45 × 38 mm

Questions
How big is the Analog and ad9958 PCB?
It measures 97.6 × 145.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Analog and ad9958 use?
226 parts, built around the SA612AD/01, CP2102, EL5166IS and LM2663M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Analog and ad9958 KiCad files?
From the balmerdx/BalmerDX_VNA repository on GitHub, at the commit this page was made from: the board is circuit_kicad/analog_and_ad9958/analog_and_ad9958.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Analog and ad9958 design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).