2 layers43 × 26 mm
Cheddar
tperale/cheddar
:satellite: A ESP8266 connected button like the Amazon Dash but programmable
30 parts10CC-BY-SA-4.0
2 layers70 × 44 mm
UCHET PLUS 1 8
VGCH/UCHET_PLUS26- Size
- 70 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 50
- Pads
- 136
- Tracks, vias
- 256, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Jul 2024
- Updated
- 25 Dec 2025
Overview
UCHET PLUS 1 8 is an open-source printed circuit board by VGCH, from the VGCH/UCHET_PLUS2 repository on GitHub. It is a 2-layer board of 70 × 44 mm with 41 parts on 50 nets, routed with 256 tracks and 0 vias.
It is built around the ATTINY2313A-SU, ESP-12E and MAX1676EUB+, with the HT7333 among its other parts. Its parts include 16 resistors, 10 capacitors, 5 ICs, 3 connectors and 2 switches. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATTINY2313A-SU
SOIC-20-300mil-40℃~+85℃ 1.8V~5.5V 128Byte 128Byte 18 20MHz 2KB 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
MAX1676EUB+
MSOP-10-40℃~+85℃@(TA) 1 2V~5.5V 500kHz 700mV~5.5V Adjustable Boost Boost Built-in Light load efficient mode、Adjustable current limiting Yes MSOP-10 DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC Converters
HT7333
SOT-89-40℃~+85℃ 1 1.5uA 20V 3.3V 300mA 300mV@(100mA) Fixed Positive Short Circuit Protection SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMinosVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdПроект устройства для интеграции счетчиков воды в системы умного дома
Принципиальная схема
Полное описание в статье на Хабр
Если данный проект был вам полезен, то вы можете задонатить разработчику на оборудование.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R8, R12 |
| 4 | 100n | Capacitor_SMD:C_1206_3216Metric | C2, C4, C5, C9 |
| 3 | 10n | Capacitor_SMD:C_1206_3216Metric | C6, C7, C8 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C1, C3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R10, R11 |
| 2 | 4.7к | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | R_0805_2012Metric | Resistor_SMD:R_0805_2012Metric | BR1, BR2 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 22uH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | ATtiny2313A-S | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U4 |
| 1 | CONFIG MODE | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | Counter2 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J2 |
| 1 | Couter1 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J1 |
| 1 | ESP-12E | RF_Module:ESP-12E | U5 |
| 1 | HT7333 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | LED | LED_THT:LED_D3.0mm_IRGrey | D1 |
| 1 | LP2985-18DBVR_SOT23 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MAX1676 | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP2.2x3.1mm_Mask1.83x1.89mm_ThermalVias | U6 |
| 1 | Power | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J3 |
| 1 | RESET / WAKEUP | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | R_1206_3216Metric | Resistor_SMD:R_1206_3216Metric | BR3 |
Similar boards
- 2 layers45 × 38 mm
- 2 layers50.8 × 38.2 mm
- 2 layers58.4 × 54 mm
- 2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers78.3 × 74.6 mm
- 2 layers482.6 × 35.6 mm
- 2 layers31.7 × 23.7 mm
Avr hid usb init tester
bga/avr-hid-usb-init-tester
Avr attiny2313 soft usb hid "keyboard" for testing bios usb initialization. Device is blinking if bios assign usb endpoint address and continue sending USB SOF (ie bios in alive).
20 parts3
Questions
How big is the UCHET PLUS 1 8 PCB?
It measures 70 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UCHET PLUS 1 8 use?
41 parts, built around the ATTINY2313A-SU, ESP-12E, MAX1676EUB+ and HT7333. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UCHET PLUS 1 8 KiCad files?
From the VGCH/UCHET_PLUS2 repository on GitHub, at the commit this page was made from: the board is UCHET_PLUS_1_8/UCHET_PLUS_1_8.kicad_pcb and its schematic UCHET_PLUS_1_8/UCHET_PLUS_1_8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UCHET PLUS 1 8 design in my own project?
Its repository states no licence, so its author keeps all rights: ask VGCH before reusing the design.