Skip to the content
2 layers78.3 × 74.6 mmVGAtonic, the printed circuit board in 3D

Entry level embedded video card in a neat little CPLD package.

Size
78.3 × 74.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
57
Nets
103
Pads
334
Tracks, vias
1,195, 66
Pours
2
Routed
Yes
KiCad
KiCad 3
Created
27 Jul 2014
Updated
20 Sep 2015

Overview

VGAtonic is an open-source printed circuit board by dqydj, from the dqydj/VGAtonic repository on GitHub. It is a 2-layer board of 78.3 × 74.6 mm with 57 parts on 103 nets, routed with 1,195 tracks and 66 vias.

It is built around the ATTINY2313A-SU. Its parts include 22 resistors, 15 capacitors, 13 connectors, 5 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.

Main components

1

README

Hardware_Rev_A/README.md

NOTE: For most purposes, you should build REVISION B. Please exit this directory and go to Rev B. It is smaller, it doesn't require extra code to work around an error in the schematic, it supports more serial speeds, and it has better ground planes and shielding for SPI signals. It also has LEDs!

The only reason you should build this version is for easy access to RCA and the GPIOs. Revision B has all the same pins broken out on a .4mm pitch header, which is harder to access, but is superior in all other ways!8

In this directory you'll find the design documentation for VGAtonic's first reference design, which we're naming v0.01 or "Rev A"

We've added three systems to the board to make it easier to develop the firmware. An LTC6903 (http://www.linear.com/product/LTC6903 , up to 68 MHz) will handle the clocking duty for VGAtonic. It is controlled by an ATTiny2313. (I've routed a few additional lines between the CPLD and the ATTiny for user expansion.)

We've also added a Gadget Factory Papilio (http://papilio.cc/) compatible (other than the 2.5v pin) header at the bottom, with two slots. 16 CPLD GPIOs are routed there. Another 3 are routed to the switch near the VGA connector.

All in all, about 3"x3", and $30 for 10 shipped from http://www.elecrow.com/ (DHL option when I purchased mine)

License: MIT (see root directory)

Parts

57
QtyValueFootprintReferences
110.1uFSM0603_CapaC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11
610kSM0805R1, R3, R4, R20, R21, R22
51kSM0805R6, R9, R12, R15, R18
42kSM0805R7, R10, R13, R16
4510SM0805R5, R8, R11, R14
3CONN_4PIN_ARRAY_4x1P2, P7, P9
210uFSM1206C14, C15
2CONN_2PIN_ARRAY_2X1P1, P5
2CONN_4X2pin_array_4x2P8, P10
2CONN_6PIN_ARRAY-6X1P3, P4
11.5kSM0805R19
11uFSM0603_CapaC12
14.7kSM0805R2
14.7uFSM1206C13
14kSM0805R17
1ATTINY2313A-SSO20LIC1
1CONN_3X2pin_array_3x2P6
1FUSESM1210F1
1IS61LV5128ALtsop2-44U3
1LTC6903MSOP_8U1
1NCP1117ST33T3GSOT223_PWRU4
1RCA_JACKrca_yellow_switchcraftCON1
1SPSTX3swdip3SW1
1USBUSB_BJ1
1VGA-HD-15HD15_B-HD15FJ2
1XC95144PQ100VQFP100U2

More from dqydj/VGAtonic

1
  • 2 layers49.6 × 70.2 mmVGATonic RevB, the printed circuit board in 3D

    VGATonic RevB

    dqydj/VGAtonic

    Entry level embedded video card in a neat little CPLD package.

    53 parts132

Similar boards

  • 2 layers47 × 39 mmQrss clock tx, the printed circuit board in 3D

    Qrss clock tx

    swharden/AVR-projects

    A collection of standalone AVR projects written in C

    32 parts184MIT
  • 2 layers482.6 × 35.6 mmPrecision clock, the printed circuit board in 3D

    Precision clock

    mitxela/PrecisionClock-Hardware

    PCB design for the Precision Clock Mk III

    49 parts41
  • 2 layers31.7 × 23.7 mmAvr hid usb init tester, the printed circuit board in 3D

    Avr hid usb init tester

    bga/avr-hid-usb-init-tester

    Avr attiny2313 soft usb hid "keyboard" for testing bios usb initialization. Device is blinking if bios assign usb endpoint address and continue sending USB SOF (ie bios in alive).

    20 parts3
  • 2 layers28.4 × 30 mmThulog, the printed circuit board in 3D

    Thulog

    isuruceanu/thulog

    Temperature & Humidity Usb Logger device

    16 parts3
  • 2 layersDevice plan, the printed circuit board in 3D

    Device plan

    lyase/hello-bulb

    making the simplest usb device using atmel2313 the board design is available in kicad format .code is c, licence GPL V3

    29 parts2
  • 2 layers150.2 × 62.6 mmUV timer, the printed circuit board in 3D

    UV timer

    VGCH/UV_lamp_PCB

    UV Lamp for PCB

    85 parts1
  • 2 layers54.8 × 40 mmTiny Sound Source, the printed circuit board in 3D

    Tiny Sound Source

    13chuck13-ua/Tiny-Sound-Source

    AVR ATtny as LPT DAC compatible with Covox Speech Thing and Disney Sound Source.

    23 parts

Questions

How big is the VGAtonic PCB?

It measures 78.3 × 74.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VGAtonic use?

57 parts, built around the ATTINY2313A-SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VGAtonic KiCad files?

From the dqydj/VGAtonic repository on GitHub, at the commit this page was made from: the board is Hardware_Rev_A/VGAtonic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the VGAtonic design in my own project?

Its repository states no licence, so its author keeps all rights: ask dqydj before reusing the design.