
Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz

Arduino Schield Pixi Analog I/O 20channel KiCAD design files
AnalogShield-01 is an open-source printed circuit board by wolfgangfriedrich, from the wolfgangfriedrich/AnalogShield-01 repository on GitHub. It is a 2-layer board of 68.6 × 53.4 mm with 74 parts on 71 nets, routed with 769 tracks and 101 vias.
It is built around the LM2663M, 78L05 and LM1117-3.3, with the MAX11300GTL+ and ZXMP6A13FTA among its other parts. Its parts include 32 resistors, 24 capacitors, 6 ICs, 6 connectors and 3 transistors.
Arduino Schield Pixi Analog I/O 20channel KiCAD design files
Project is hosted at HackADay.io https://hackaday.io/project/4397-pixi-analog-shield
Arduino library and sample code are storedin a separate repository https://github.com/wolfgangfriedrich/Pixi_demo
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10.0R | SM0603_Resistor | R0, R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 +4 |
| 10 | 10uF | SM1206 | C1, C4, C8, C10, C11, C12, C13, C20, C21, C24 |
| 8 | 100nF | SM0603_Capa | C2, C3, C7, C9, C14, C16, C17, C19 |
| 4 | 0R | SM0603_Resistor | R20, R24, R26, R28 |
| 4 | 4K7 | SM0603_Resistor | R21, R22, R27, R31 |
| 3 | 120R | SM0603_Resistor | R25, R29, R30 |
| 2 | 10uF | c_elec_5x5.8 | C5, C22 |
| 2 | 330nF | SM0603_Capa | C15, C18 |
| 2 | 3904 | SOT23 | Q2, Q3 |
| 2 | 47uF | c_elec_5x5.8 | C6, C23 |
| 2 | 78L05 | sot89 | U3, U4 |
| 1 | +15V | ADAM_ADC-028 | CON1 |
| 1 | 1K04 | SM0603_Resistor | R23 |
| 1 | LM1117 | SOT223 | U1 |
| 1 | LM2663 | so-8 | U6 |
| 1 | LM337 | SOT223 | U5 |
| 1 | MAX11300GTL+ | QFN50P-60X60-41N | U2 |
| 1 | OSHW-logo_silkscreen-front_2mm | OSHW-logo_silkscreen-front_2mm | G2 |
| 1 | OSHW-logo_silkscreen-front_4mm | OSHW-logo_silkscreen-front_4mm | G1 |
| 1 | P0 - P9 | Molex_015912200 | P1 |
| 1 | P10 - P19 | Molex_015912200 | P2 |
| 1 | PIXI Analog Shield | ARDUINO_SHIELD_rev03 | SHIELD1 |
| 1 | TEMP0 | PIN_ARRAY_2X1 | P4 |
| 1 | TEMP1 | JST_B2B-PH-SM4-TB | P5 |
| 1 | TEMP_EXT | PIN_ARRAY_2X1 | P6 |
| 1 | ZXMP6A13FTA | SOT23 | Q1 |

balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz

stahlnow/mixerli
Battery powered 10 channel (4x2 + 1x2) stereo mixer featuring stereo input level control slider and stereo rotary aux send level control.


andrzejkasica/CO-sensor
Project based on ME2-CO gas sensor with current loop and 2 relays output.



espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

mbarszcz-pcb/c64-rf-modulator-replacement
C64 Composite/S-Video RF Modulator Replacement
It measures 68.6 × 53.4 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the LM2663M, 78L05, LM1117-3.3 and MAX11300GTL+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wolfgangfriedrich/AnalogShield-01 repository on GitHub, at the commit this page was made from: the board is AnalogShield-01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wolfgangfriedrich before reusing the design.