Skip to the content
123

78L05

UMWExtended

-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
umw/78L05
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-89-3
Pins
3
In stock
721,331 at JLCPCB (C347258)
Used on
95 open-source boards

Overview

The 78L05 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by UMW in a SOT-89-3 package with 3 pins. -20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-89-3, from KiCad's library), ready for a KiCad board. 721,331 are in stock at JLCPCB (part C347258). 95 open-source boards in 63 repositories on GitHub use it.

Symbol

3IN1OUT2GND
Pinmap_Generic:Regulator_Linear_1OUT_2GND_3INFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-89-3From KiCad's library

From the datasheet

6
Supply, absolute maximum
35 V · VI, absolute maximum for VO = 3.3 to 18 V · p. 2
Junction, hottest
120 °C · maximum junction temperature · p. 2
Takes working
2 mA · typical quiescent current, VI = 10 V, IO = 40 mA · p. 4
Gives
100 mA · maximum output current · p. 1
Output
5 V · typical fixed output, TJ = 25°C, VI = 10 V, IO = 40 mA · p. 4
Dropout
1.7 V · typical dropout, TJ = 25°C, IO = 40 mA · p. 4

What it is and has

2
Protection
Thermal overload protection · p. 1
Protection
Short circuit current limiting · p. 1

Specifications

18
ParameterConditionsAs printedPage
Input voltage (for VO=3.3 to 18V) VI78L05max 35 V2
Power Dissipation PdSOT-89max 400 mW2
Junction Temperature Range TOPRmin -20 · max 120 °C2
Storage Temperature Range TSTGmin -55 · max 150 °C2
Output Voltage VOTJ=25°C; VI=10V, IO=40mA, C1=0.33uF, CO=0.1uFmin 4.8 · typ 5 · max 5.2 V4
Output Voltage VO7.5V≤VI≤20V,IO=1mA~40mA; 0<TJ<25°C, C1=0.33uF, CO=0.1uFmin 4.75 · max 5.25 V4
Output Voltage VO7.5V≤VI≤VMAX,IO=1mA~70mA; note 2: Power dissipation<0.75W; 0<TJ<25°C, C1=0.33uF, CO=0.1uFmin 4.75 · max 5.25 V4
Load Regulation ΔVOTJ=25°C, IO=1mA~100mA; VI=10V, C1=0.33uF, CO=0.1uFtyp 11 · max 60 mV4
Load Regulation ΔVOTJ=25°C, IO=1mA~40mA; VI=10V, C1=0.33uF, CO=0.1uFtyp 5 · max 30 mV4
Line regulation ΔVO7V ≤VI≤20V,TJ=25°C; IO=40mA, C1=0.33uF, CO=0.1uFtyp 8 · max 150 mV4
Line regulation ΔVO8V ≤VI≤20V,TJ=25°C; IO=40mA, C1=0.33uF, CO=0.1uFtyp 6 · max 100 mV4
Quiescent Current IqVI=10V, IO=40mA, 0<TJ<25°C, C1=0.33uF, CO=0.1uFtyp 2 · max 5.5 mA4
Quiescent Current Change ΔIq8V ≤VI≤20V; IO=40mA, 0<TJ<25°C, C1=0.33uF, CO=0.1uFmax 1.5 mA4
Quiescent Current Change ΔIq1mA ≤IO≤40mA; VI=10V, 0<TJ<25°C, C1=0.33uF, CO=0.1uFmax 0.1 mA4
Output Noise Voltage VN10Hz ≤f≤100kHz; VI=10V, IO=40mA, 0<TJ<25°C, C1=0.33uF, CO=0.1uFtyp 40 uV4
Temperature coefficient of VO ΔVO/ ΔTIO=5mA; VI=10V, 0<TJ<25°C, C1=0.33uF, CO=0.1uFtyp 0.65 mV/°C4
Ripple Rejection RR8V≤VI≤20V,f=120Hz,TJ=25°C; IO=40mA, C1=0.33uF, CO=0.1uFmin 40 · typ 49 dB4
Dropout Voltage VdTJ=25°C; VI=10V, IO=40mA, C1=0.33uF, CO=0.1uFtyp 1.7 V4

Ordering codes, by the datasheet

1
UMW 78Lxx
SOT-89 · 1000 base quantity, tape and reel · p. 21

Open-source boards using it

95See all 95
  • 2 layers36.8 × 34.7 mmTinylab proto1, the printed circuit board in 3D

    Tinylab proto1

    espotek-org/Labrador

    EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

    79 parts1.2k
  • 2 layers51.8 × 32.6 mmC64-rf modulator replacement, the printed circuit board in 3D

    C64-rf modulator replacement

    mbarszcz-pcb/c64-rf-modulator-replacement

    C64 Composite/S-Video RF Modulator Replacement

    33 parts86MIT
  • 2 layers86.4 × 69.9 mmPeaks, the printed circuit board in 3D

    Peaks

    matias-levy/peaks

    A fully-functional low-cost reversion of Mutable instrument's Peaks

    54 parts58
  • 2 layers106 × 95.4 mmHardmpu wt, the printed circuit board in 3D

    Hardmpu wt

    PickledDog/hardmpu-wt

    HardMPU with wavetable module support

    50 parts30Apache-2.0
  • 2 layers41.1 × 110.7 mmJNTUB, the printed circuit board in 3D

    JNTUB

    joyfulnoisesynth/JNTUB

    JoyfulNoise Tiny Utility Board

    84 parts26
  • 2 layers99.1 × 63.5 mmMerger euro, the printed circuit board in 3D

    Merger euro

    b38tn1k/chordtoy

    MIDI Hardware Chord Generator

    39 parts19MIT
  • 2 layers55.4 × 66 mmOwmBoard, the printed circuit board in 3D

    OwmBoard

    kanengomibako/EffectsPedals

    166 parts14Unlicense
  • 2 layers73 × 99.8 mmSodium, the printed circuit board in 3D

    Sodium

    kanengomibako/Sodium

    85 parts14Unlicense

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 78L05?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN and the footprint Package_TO_SOT_SMD:SOT-89-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 78L05?

SOT-89-3, with 3 pins. Its footprint is drawn on this page.

Where is the 78L05 datasheet?

UMW publishes it: the Datasheet link on this page opens it.

Where can I order the 78L05?

JLCPCB lists it as part C347258, with 721,331 in stock; the sellers' links on this page open their listings.

What can replace the 78L05?

Parts like it in the library: the AS78L05RTR-E1 by Diodes Incorporated, the HT7550-1 by UMW, the 78L05G-AB3-R by UTC and the HT7550-1 by HOLTEK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 78L05?

95 boards in 63 repositories on GitHub; the most starred are listed on this page, with their KiCad files.