Skip to the content
123

HT7550-1

HOLTEKJLCPCB preferred

-40℃~+85℃@(Ta) 1 150mA 2.5uA 25mV@(1mA) 30V 5V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
holtek-semicon/HT7550-1
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-89-3
Pins
3
In stock
184,007 at JLCPCB (C16106)
Used on
13 open-source boards

Overview

The HT7550-1 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by HOLTEK in a SOT-89-3 package with 3 pins. -40℃~+85℃@(Ta) 1 150mA 2.5uA 25mV@(1mA) 30V 5V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-89-3, from KiCad's library), ready for a KiCad board. 184,007 are in stock at JLCPCB (part C16106). 13 open-source boards in 12 repositories on GitHub use it.

Symbol

2IN3OUT1GND
Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUTFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-89-3From KiCad's library

Pinout

3
The pins of the HT7550-1
PinNameType
1GNDPower in
2INPower in
3OUTPower out

Open-source boards using it

13See all 13
  • 2 layers31.1 × 34.5 mmOpenThermMonitorTwomes, the printed circuit board in 3D

    OpenThermMonitorTwomes

    energietransitie/twomes-opentherm-monitor-hardware

    Open hardware design files for the Twomes OpenTherm Monitor device

    28 parts3
  • 4 layers53.1 × 98 mmMarsupial, the printed circuit board in 3D

    Marsupial

    VIPQualityPost/marsupial

    2 port USB PD + data hub

    208 parts3
  • 2 layers100 × 40 mmCapbank placement 4pin, the printed circuit board in 3D

    Capbank placement 4pin

    beneckart/resonance-lighting

    capbankrxdocked.kicadpcb is the v1.0 cap-bank board with an RX480E-4 receiver module posed in the RECVR socket, for viewing in the KiCad 3D viewer.

    31 parts2
  • 2 layers29 × 22 mm5way cv switch, the printed circuit board in 3D

    5way cv switch

    cycfi/5way_cv_switch

    KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

    20 parts
  • 2 layers30 × 8 mmCv buffer, the printed circuit board in 3D

    Cv buffer

    cycfi/cv_buffer

    KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

    11 parts
  • 2 layers102.8 × 94 mmCv pot big panel, the printed circuit board in 3D

    Cv pot big panel

    cycfi/cv_pot_big

    KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

    721 parts
  • 2 layers70 × 14 mmTouch pad, the printed circuit board in 3D

    Touch pad

    cycfi/touch_pad

    KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

    18 parts
  • 2 layers22 × 31 mmUnderglow slave, the printed circuit board in 3D

    Underglow slave

    lukmatuska/Underglow

    Cheap wireless lighting system for small local applications (cars, bikes, etc...)

    15 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HT7550-1?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT and the footprint Package_TO_SOT_SMD:SOT-89-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HT7550-1?

SOT-89-3, with 3 pins. Its footprint is drawn on this page.

Where is the HT7550-1 datasheet?

HOLTEK publishes it: the Datasheet link on this page opens it.

Where can I order the HT7550-1?

JLCPCB lists it as part C16106, with 184,007 in stock; the sellers' links on this page open their listings.

What can replace the HT7550-1?

Parts like it in the library: the 78L05 by GR, the 78L05-150 by UMW, the 78L05-300 by UMW and the AMS1117-5.0V by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HT7550-1?

13 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.