
Capbank rx docked
beneckart/resonance-lighting
capbankrxdocked.kicadpcb is the v1.0 cap-bank board with an RX480E-4 receiver module posed in the RECVR socket, for viewing in the KiCad 3D viewer.

capbankrxdocked.kicadpcb is the v1.0 cap-bank board with an RX480E-4 receiver module posed in the RECVR socket, for viewing in the KiCad 3D viewer.
Capbank placement 4pin is an open-source printed circuit board by beneckart, from the beneckart/resonance-lighting repository on GitHub. It is a 2-layer board of 100 × 40 mm with 31 parts on 12 nets.
It is built around the MT3608, HT7550-1 and BZX84C3V3, with the SS34 among its other parts. Its parts include 11 resistors, 9 capacitors, 2 ICs, 2 diodes and 1 switch.
capbank_rx_docked.kicad_pcb is the v1.0 cap-bank board with an RX480E-4
receiver module posed in the RECVR socket, for viewing in the KiCad 3D viewer.
It is visualization only — it never feeds gerbers, drills, placement, or
BOM, and the fab board (../build/capbank.kicad_pcb) carries no such model.
Rebuild it:
./fetch_rx_model.sh # once: pulls radio-receiver.step
python3 generate_capboard.py # regenerates the fab board
python3 make_rx_viz.py # writes viz/capbank_rx_docked.kicad_pcbradio-receiver.step comes from https://github.com/besi/kicad-radio-receiver
(3D model credited there to Alejandro Hurtado via GrabCAD). That project ships
no license file, so the model is deliberately not committed here — the
fetch script pulls it on demand. It represents the RX480E-4 family rather than
any specific vendor's board, so treat it as indicative, not dimensional truth.
rot (90, 180, 90), offset (-4.1, -12.595, 14.64), fitted by eye against the
real part. RECVR sits at 90°, so the offset axes are rotated relative to the
board: offset.x moves along board −Y (≈4.1 mm of standoff for the right-angle
pins' horizontal run before they turn down), offset.y along board −X (2.54 mm
= one pin pitch), offset.z straight up (socket body + header thickness).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 22000u 16V | CP_Radial_D18.0mm_P7.50mm | C2, C3, C4 |
| 3 | 47k | R_0805_2012Metric | R4, R10, R11 |
| 2 | 10uF X7R 16V | C_1206_3216Metric | C1, C7 |
| 2 | 6.8k | R_0805_2012Metric | R5, R9 |
| 2 | XH 4p SMT (pin4=GND) | JST_XH_S4B-XH-SM4-TB_1x04-1MP_P2.50mm_Horizontal | DRIVER, PANEL |
| 1 | 10k | R_0805_2012Metric | R3 |
| 1 | 10uF 25V | C_1206_3216Metric | C9 |
| 1 | 130k | R_0805_2012Metric | R8 |
| 1 | 1k | R_0805_2012Metric | R7 |
| 1 | 1n | C_0805_2012Metric | C5 |
| 1 | 22uF 16V | C_1206_3216Metric | C8 |
| 1 | 22uH 2.4A | L_Bourns_SRN6045TA | L1 |
| 1 | 330k | R_0805_2012Metric | R2 |
| 1 | 470R | R_0805_2012Metric | R1 |
| 1 | BYPASS DNP | R_0805_2012Metric | JP1 |
| 1 | BZX84C3V3 | SOT-23 | D1 |
| 1 | DNP | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1B |
| 1 | DNP TRIM | C_Disc_D5.0mm_W2.5mm_P5.00mm | R12 |
| 1 | HT7550-1 | SOT-89-3 | U1 |
| 1 | MT3608 | SOT-23-6 | U2 |
| 1 | RX480E DOCK | PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Left | RECVR |
| 1 | SS34 | D_SMA | D2 |
| 1 | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1 |
| 1 | VSNS/EN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | TELE |

beneckart/resonance-lighting
capbankrxdocked.kicadpcb is the v1.0 cap-bank board with an RX480E-4 receiver module posed in the RECVR socket, for viewing in the KiCad 3D viewer.

beneckart/resonance-lighting
capbankrxdocked.kicadpcb is the v1.0 cap-bank board with an RX480E-4 receiver module posed in the RECVR socket, for viewing in the KiCad 3D viewer.

telagod/moskill
MosKill - Smart Mosquito Swatter with BLE, Kill Counting & Statistics | ESP32-C3 + KiCad PCB + UniApp

energietransitie/twomes-opentherm-monitor-hardware
Open hardware design files for the Twomes OpenTherm Monitor device


cycfi/5way_cv_switch
KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

cycfi/cv_buffer
KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

cycfi/cv_pot_big
KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

cycfi/touch_pad
KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

lukmatuska/Underglow
Cheap wireless lighting system for small local applications (cars, bikes, etc...)
It measures 100 × 40 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the MT3608, HT7550-1, BZX84C3V3 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the beneckart/resonance-lighting repository on GitHub, at the commit this page was made from: the board is hardware/capboard/capbank_placement_4pin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask beneckart before reusing the design.