

Mixerli
Battery powered 10 channel (4x2 + 1x2) stereo mixer featuring stereo input level control slider and stereo rotary aux send level control.
- Size
- 126 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 166
- Nets
- 104
- Pads
- 457
- Tracks, vias
- 846, 34
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Jul 2017
- Updated
- 7 Jan 2026
Overview
Mixerli is an open-source printed circuit board by stahlnow, from the stahlnow/mixerli repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 126 × 108 mm with 166 parts on 104 nets, routed with 846 tracks and 34 vias.
It is built around the NJM4580E-TE1, MCP73831 and 47UF/25V, with the BAT20JFILM, UJC-HP-3-SMT-TR and ZXMP6A13FTA among its other parts. Its parts include 70 resistors, 50 capacitors, 11 ICs, 11 connectors and 3 diodes. It belongs with the audio and music and power boards of this library.
Main components
6NJM4580E-TE1
SOP-8-18V~18V -40℃~+85℃ 110dB 15MHz 2 3mV 500nA 5V/us 5nA 6mA SOP-8 Operational Amplifier ROHSJRCOperational AmplifierMCP73831
UncategorisedMicrochip Technology47UF/25V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedBAT20JFILM
SOD-3231 Independent 12uA@15V 1A 23V 5A 620mV@1A SOD-323 Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesUJC-HP-3-SMT-TR
插件USB ConnectorsCUIZXMP6A13FTA
SOT-23-55℃~+150℃ 1 P-Channel 1.5W 1.6A 11.3nC@10V 17.9pF 2.6V 240mΩ@4.5V 444.2pF 60V SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdmixerli
Battery powered 10 channel (4x2 + 1x2) stereo mixer featuring stereo input level control slider and stereo rotary aux send level control.

Documentation
License
SPDX-FileCopyrightText: 2023 Stahl office@stahlnow.com SPDX-License-Identifier: CERN-OHL-S-2.0+
This source describes Open Hardware and is licensed under the CERN-OHL-S v2 or any later version.
You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2 or any later version (https://ohwr.org/cern_ohl_s_v2.txt).
This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions.
Source location: https://github.com/stahlnow/mixerli
As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the printed circuit board of the mixerli or other products you make using this source.
Parts
166| Qty | Value | Footprint | References |
|---|---|---|---|
| 47 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R10, R17, R18, R19, R20, R25, R26, R27, R28, R29, R30, R33, R34 +31 |
| 18 | 0.1 | Capacitor_SMD:C_1206_3216Metric | C3, C4, C11, C12, C13, C14, C25, C26, C27, C28, C33, C34, C39, C40, C45, C46 +2 |
| 16 | 47pF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C5, C6, C7, C8, C21, C22, C23, C24, C31, C32, C37, C38, C43, C44 |
| 10 | 47k | Resistor_SMD:R_1206_3216Metric | R21, R22, R23, R24, R31, R32, R55, R56, R61, R62 |
| 10 | 47uF/25V | Capacitor_SMD:CP_Elec_5x5.8 | C17, C18, C19, C20, C29, C30, C35, C36, C41, C42 |
| 9 | NJM4580 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U5, U6, U7, U8, U9 |
| 7 | QingPu_WQP-PJ366ST | stahllabs:Jack_3.5mm_QingPu_WQP-PJ366ST_Vertical | J1, J2, J3, J4, J5, J6, J7 |
| 6 | 10k | stahllabs:RS451121400A | RV1, RV2, RV3, RV4, RV9, RV10 |
| 5 | 100k | Resistor_SMD:R_1206_3216Metric | R11, R12, R15, R16, R67 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5 |
| 4 | 100 | Resistor_SMD:R_1206_3216Metric | R7, R8, R13, R14 |
| 4 | 47uF | Capacitor_SMD:CP_Elec_5x5.8 | C9, C10, C15, C16 |
| 4 | 50k A | stahllabs:RK14K12D0A18 | RV5, RV6, RV7, RV8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 2 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C49, C50 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric | R68, R69 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R65 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric | R66 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | BAT20JFILM | Diode_SMD:D_SOD-323 | D2 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J10 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | DC-DC-Boost-Converter-Positive-Negative-Dual-Output-Power-Supply | stahllabs:DC-DC-Boost-Converter-Positive-Negative-Dual-Output-Power-Supply | U11 |
| 1 | LED | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D1 |
| 1 | MCP73831 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | PWR-LED | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D3 |
| 1 | SW_SPDT | stahllabs:Switches_Alps_SSSS916400 | SW1 |
| 1 | UJC-HP-3-SMT-TR | stahllabs:USB_C_Receptacle_CUI_Devices_UJC-HP-3-SMT-TR | J8 |
| 1 | ZXMP6A13FTA | Package_TO_SOT_SMD:SOT-23 | Q1 |
Similar boards
- 4 layers58.4 × 54 mm

- 2 layers66.8 × 104.8 mm

- 2 layers68.6 × 53.4 mm

AnalogShield-01
wolfgangfriedrich/AnalogShield-01
Arduino Schield Pixi Analog I/O 20channel KiCAD design files
74 parts1 - 4 layers75.5 × 78 mm

Current loop gen
andrzejkasica/CO-sensor
Project based on ME2-CO gas sensor with current loop and 2 relays output.
126 parts - 4 layers120 × 65 mm

- 2 layers94 × 57.5 mm

- 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 8 layers146 × 102 mm
![[DFR1144][M027.00940](V1.0.0), the printed circuit board in 3D](/embed/boards/LattePandaTeam/LattePanda-Mu.jpg?size=s&soon)
[DFR1144][M027.00940](V1.0.0)
LattePandaTeam/LattePanda-Mu
All About LattePanda Mu N100/N305 Compute Module
495 parts309MIT
Questions
How big is the Mixerli PCB?
It measures 126 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mixerli use?
166 parts, built around the NJM4580E-TE1, MCP73831, 47UF/25V and BAT20JFILM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mixerli KiCad files?
From the stahlnow/mixerli repository on GitHub, at the commit this page was made from: the board is mixerli.kicad_pcb and its schematic fader.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mixerli design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).