Skip to the content
12345

TPS79318DBV

Texas InstrumentsExtended

-40℃~+150℃ 1 1.8V 200mA 220uA 43dB@(100kHz)、70dB@(100Hz) 5.5V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS79318DBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
22,215 at JLCPCB (C7102)
Used on
1 open-source board

Overview

The TPS79318DBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+150℃ 1 1.8V 200mA 220uA 43dB@(100kHz)、70dB@(100Hz) 5.5V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4BYP_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 22,215 are in stock at JLCPCB (part C7102). 1 open-source board in 1 repository on GitHub use it.

Symbol

1IN3EN5OUT4BYP2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4BYP_5OUTFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

10
Supply, least
2.7 V · VIN, recommended operating, min · p. 4
Supply, most
5.5 V · VIN, recommended operating, max · p. 4
Supply, absolute maximum
6 V · VIN, absolute maximum · p. 4
Junction, hottest
150 °C · DBV junction temperature, absolute max · p. 4
Takes working
170 µA · ground pin current, output on, 0–200 mA load, typical · p. 6
Takes at most
220 µA · ground pin current, output on, 0–200 mA load, max · p. 6
Takes asleep
70 nA · shutdown, VEN = 0 V, typical · p. 6
Gives
200 mA · continuous output current, max · p. 6
Current limit
285 mA · output current limit, VOUT = 0 V, min · p. 6
Output
1.8 V · TPS79318 fixed output, typical · p. 6

Open-source boards using it

1
  • 4 layers97.6 × 145.1 mmAnalog and ad9958, the printed circuit board in 3D

    Analog and ad9958

    balmerdx/BalmerDX_VNA

    Vector Network Analyzer 10 KHz - 180 MHz

    226 parts26BSD-2-Clause

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS79318DBV?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4BYP_5OUT and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS79318DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS79318DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS79318DBV?

JLCPCB lists it as part C7102, with 22,215 in stock; the sellers' links on this page open their listings.

What can replace the TPS79318DBV?

Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the LP5907MFX-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS79318DBV?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.