2 layers
2 layers33 × 58.8 mm
Fusion
chungyu710/Fusion4Capstone Design Project
- Size
- 33 × 58.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 33
- Pads
- 122
- Tracks, vias
- 192, 23
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 May 2022
- Updated
- 14 Mar 2023
Overview
Fusion is an open-source printed circuit board by chungyu710, from the chungyu710/Fusion repository on GitHub. It is a 2-layer board of 33 × 58.8 mm with 36 parts on 33 nets, routed with 192 tracks and 23 vias.
It is built around the PIC16F690-I/P, HC-05 and LSM6DSOX. Its parts include 10 resistors, 8 capacitors, 6 connectors, 3 switches and 2 ICs. It belongs with the PIC boards of this library.
Main components
3
PIC16F690-I/P
DIP-20-40℃~+85℃ 10bit 18 20MHz 256Byte 256Byte 2V~5.5V 7KB 8 Bit Built-in FLASH PIC DIP-20 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
HC-05
Bluetooth to Serial Port ModuleGENERICUncategorised
LSM6DSOX
LGA-146-Axis IMU (Inertial Measurement Unit) with Embedded AI: Always-On 3-Axis Accelerometer and 3-Axis GyroscopeSTMicroelectronicsAccelerometers
README
README.mdFusion
Capstone Design Project
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R6, R7, R8, R9, R10 |
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7, C8 |
| 2 | 200R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 4.7uH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | BATTERY | Fusion:JST | J1 |
| 1 | BUTTON | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | FLEX | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J5 |
| 1 | FTDI | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | HC-05 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | LSM6DSOX | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J2 |
| 1 | MCP1603 | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U1 |
| 1 | PIC16F690 | Package_DIP:DIP-20_W7.62mm_Socket | U2 |
| 1 | PICKIT | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | POWER | Fusion:SP3T | SW2 |
| 1 | UART | Fusion:SPDT | SW3 |
The 32 most common of 36 parts.
Similar boards
- 2 layers56 × 6.2 mm
- 6 layers
Sentinel HYDRA
dhruv1859/CARVantaBAC
🧬 CARVanta Next-Generation Precision Oncology & AI CAR-T Cell Platform Interactive 3D Biological Digital Twin • 3D Neural Bridge • Sentinel HYDRA Biosensor
135 parts1Apache-2.0 - 4 layers62.9 × 42.5 mm
PCB Design PFE
khawlahhouki/fatigue-detection-edge-ai
Real-time physical fatigue detection using Edge AI on STM32H7 with FreeRTOS, biosignal acquisition (PPG, EMG, IMU) and TFLite INT8 inference
64 parts1 - 2 layers120 × 70 mm
Balancing robot pcb
simonceglarz/self-balancing-rc-robot
ESP32 Self Balancing Remote Controleld Pendulum Bot.
48 parts1 - 2 layers23 × 83 mm
- 4 layers41 × 41 mm
- 2 layers27.6 × 30.5 mm
MotionRecognitionWatch
AidenBTTU/Gesture-Capture-Watch
A wristband-mounted gesture recognition system built around an STM32F411, IMU, and OLED display, with USB-C battery charging and ESD-protected I/O.
46 parts
Questions
How big is the Fusion PCB?
It measures 33 × 58.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fusion use?
36 parts, built around the PIC16F690-I/P, HC-05 and LSM6DSOX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fusion KiCad files?
From the chungyu710/Fusion repository on GitHub, at the commit this page was made from: the board is hardware/kicad/fusion.kicad_pcb and its schematic hardware/kicad/fusion.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fusion design in my own project?
Its repository states no licence, so its author keeps all rights: ask chungyu710 before reusing the design.