Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers11.4 × 21.6 mmSignalLink User Adapter, the printed circuit board in 3D

    SignalLink User Adapter

    open-headset-interconnect-standard/SignalLink-OHIS

    An OHIS compliant config board for the SignalLink

    2 partsCC-BY-4.0
  • 2 layers22.2 × 50.8 mmKgm m3-led adapter lugs, the printed circuit board in 3D

    Kgm m3-led adapter lugs

    openSignalBox/kgm-m3-led-adapter-lugs

    A solder lug adapter for LED upgrade of KGM M3 displays. Pairs with the base board.

    19 parts
  • 2 layers50 × 40 mmUART to RS422 Board, the printed circuit board in 3D

    UART to RS422 Board

    OpenSpacecraft/Open_UART_to_RS422

    Open Source UART to RS422 transceiver for students and startups.

    27 partsCERN-OHL-P-2.0
  • 2 layers79.9 × 40.1 mmOpenmv breakout, the printed circuit board in 3D

    Openmv breakout

    opinau/cv-2

    Projekt je sufinancirala Europska unija iz Europskog fonda za regionalni razvoj

    14 partsGPL-3.0
  • 2 layers15.2 × 8.4 mmTiny85 SP Breakout, the printed circuit board in 3D

    Tiny85 SP Breakout

    orangeglo/Tiny85_SP_Breakout

    Flex board breakout for the ATtiny85, designed for the Game Boy SP, but useful for anything

    5 partsGPL-3.0
  • 2 layers33 × 52 mmLS018B7DH02-Breakout Board, the printed circuit board in 3D

    LS018B7DH02-Breakout Board

    Ortupas/LS018B7DH02-Breakout-Board

    Breakout board for the Sharp Memory LCD – LS018B7DH02. This repository contains schematics and PCB layout built with KiCad, plus fabrication outputs (Gerbers) so you can order boards, assemble, and test quickly.

    23 partsMIT
  • 4 layers18 × 84.7 mmMatrix Keypad To CAN Bus, the printed circuit board in 3D

    Matrix Keypad To CAN Bus

    OSE-NZ/keypad-to-can-pcb

    PCB to interface a matrix keypad to a CAN bus.

    36 partsMIT
  • 2 layers16 × 19.8 mmSht45 breakout, the printed circuit board in 3D

    Sht45 breakout

    osmanates/sht45_breakout

    Sensirion SHT45 (±1.0 %RH, ±0.1 °C, I²C) nem ve sıcaklık sensörü için küçük bir breakout (modül) kartı. Şema, PCB, Gerber, delik dosyası ve JLCPCB montaj (BOM/CPL) dosyaları bu depoda.

    9 parts
  • 2 layers65.1 × 36.2 mmTangADC, the printed circuit board in 3D

    TangADC

    otanl/CVBS2HDMI

    CVBS2HDMI: composite NTSC to HDMI on a Tang Nano 20K, decoded in the FPGA (AD9280 ADC, open-source toolchain)

    53 partsMIT
  • 2 layers179.2 × 70.7 mmRP120 GPIO Interface, the printed circuit board in 3D

    RP120 GPIO Interface

    owaits/oneTally

    Integrated Tally Control Modules

    11 partsMIT
  • 2 layers51.5 × 46.3 mmStm32-design, the printed circuit board in 3D

    Stm32-design

    oxfordfish/stm32f103c8t6-breakout-board

    Custom STM32F103C8T6 breakout board designed in KiCad 10. Features USB-C power delivery, SWD debugging, on-board 3.3V LDO, and broken-out USART, CAN, and I2C headers. (Untested - In fabrication)

    37 partsCERN-OHL-P-2.0
  • 2 layers88 × 55 mmPCB Card, the printed circuit board in 3D

    PCB Card

    OxfordInstrumentsRecruitment/51-G-1128-719

    STM32F103 breakout board

    76 parts
  • 4 layers219 × 117.4 mmPanel, the printed circuit board in 3D

    Panel

    oxidecomputer/hardware-adafruit-ignition-adapter

    Programming Adapter for using Adafruit FT232H and iceprog

    202 partsMPL-2.0
  • 4 layers297 × 210 mmBatteryPack 16S A4 Breakout, the printed circuit board in 3D

    BatteryPack 16S A4 Breakout

    P-Shreyas543/BatteryPack_16S_A4_Breakout

    KiCad 10 project for a 14S (58.8 V max, 50.4 V nominal) 18650 battery pack on a 297 × 210 mm (A4) 4-layer PCB, built as a BMS breakout and training board.

    144 parts
  • 2 layers76.2 × 55.3 mmHalf bridges adc, the printed circuit board in 3D

    Half bridges adc

    p4l1ly/half_bridges_adc

    stm32 nucleof334r8 extension board with 3 half bridge mosfet drivers for inductions, with current measurement

    36 parts
  • 4 layers66 × 47.1 mmSTM32F4 Breakout, the printed circuit board in 3D

    STM32F4 Breakout

    paagutie/bluerov_acmodule

    DIY Board developed as actuator module using micro-ROS as middelware.

    70 partsApache-2.0
  • 2 layers27.6 × 20.6 mmAMS1117-Adjustable Breakout, the printed circuit board in 3D

    AMS1117-Adjustable Breakout

    Pan-Robotics/AMS-Reg-Breakout

    Breakout PCB for AMS1117 LDO Voltage Regulator

    14 parts
  • 2 layers129.5 × 63.5 mmMKP1 - Breakout Board, the printed circuit board in 3D

    MKP1 - Breakout Board

    Parker-Drouillard/MKP1.5-BreakoutBoard

    A breakout board for supporting dual extrusion & 6 pwm fan control for the Rambo 1.4

    51 parts
  • 4 layers47.3 × 34.9 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    Parkr2005/MCU-Datalogger-PCB

    A 4-layer KiCad PCB featuring an ATmega328P-AU microcontroller, DS1337 real-time clock, dual 24LC1025 EEPROMs, ICSP programming, UART, I²C, and GPIO expansion headers.

    28 parts
  • 4 layers20 × 41 mmAud, the printed circuit board in 3D

    Aud

    parport0/tad5212_breakout

    A breakout board for TAD5212/TAD5112 stereo audio DAC from TI

    25 partsCC0-1.0
  • 2 layers52.5 × 36 mmAaa adapter, the printed circuit board in 3D

    Aaa adapter

    partlyhuman/hp-calculator-battery-pack

    The charger is designed for Ni-Cad batteries. If you use this battery pack with any other battery chemistry, be certain not to plug in the AC adapter or you could damage not just the batteries but your calculator.

    2 parts
  • 2 layers50.8 × 30.5 mmRak4630 interface, the printed circuit board in 3D

    Rak4630 interface

    pashamray/rak4630_interface

    An open-source hardware breakout / interface board for the RAK4630 LoRa module (Nordic nRF52840 + Semtech SX1262), designed in KiCad 9.

    27 partsMIT