Skip to the content
4 layers66 × 47.1 mmSTM32F4 Breakout, the printed circuit board in 3D

DIY Board developed as actuator module using micro-ROS as middelware.

Size
66 × 47.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
70
Nets
84
Pads
297
Tracks, vias
510, 79
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Mar 2022
Updated
31 May 2025

Overview

STM32F4 Breakout is an open-source printed circuit board by paagutie, from the paagutie/bluerov_acmodule repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 66 × 47.1 mm with 70 parts on 84 nets, routed with 510 tracks and 79 vias.

It is built around the STM32F405RGT6, R-785.0-1.0 and AMS1117-3.3, with the USBLC6-2SC6, BC848 and IRLML6402 among its other parts. Its parts include 24 connectors, 16 capacitors, 13 resistors, 4 ICs and 2 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.

Main components

7

README

README.md

bluerov_acmodule

DIY Board developed as actuator module for a custom BlueROV2 that uses micro-ros as middelware for integration with ROS2. The STM32CubeIDE program was used as programming IDE and the micro_ros_stm32cubemx_utils repository was used for integration with micro-ROS. For more information, follow the steps described in its documentation.

Software

Requirements

Installation

  • Clone the repository and copy the software data to the STM32CubeIDE workspace:
text
cd ~
mkdir ~/STM32CubeIDE/workspace_1.x.x/minirov_acmodule
git clone --recurse-submodules https://github.com/paagutie/minirov_acmodule.git
cp -a minirov_acmodule/software/. ~/STM32CubeIDE/workspace_1.x.x/minirov_acmodule
cd /minirov_acmodule/sofware
  • Then copy the contents of the extra_packages folder (custom messages) to the STM32CubeIDE directory. In case you want to add new packages, they can be copied to the extra_packages directory:
text
export EXTRA_PACKAGES_DIR=~/STM32CubeIDE/workspace_1.x.x/minirov_acmodule/micro_ros_stm32cubemx_utils/microros_static_library_ide/library_generation/extra_packages/
cp -a extra_packages/. $EXTRA_PACKAGES_DIR
  • Finally, import the project and compile it using STM32CubeIDE.

ROS2 Topics

Subscribers:

  • actuator/module/out/control

Publishers:

  • actuator/module/battery/data
  • actuator/module/leak

Hardware

For the development of the printed circuit board we used the Cross Platform and Open Source Electronics Design Automation Suite KiCad.

Here is an image of the finished Actuator Module.

DIY Circuit Board

Parts

70
QtyValueFootprintReferences
12Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23
72k2Resistor_SMD:R_0603_1608MetricR2, R3, R4, R8, R9, R12, R13
6Conn_01x04Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ3, J4, J5, J6, J7, J11
5100nFCapacitor_SMD:C_0603_1608MetricC2, C3, C5, C6, C8
4MountingHole_PadMountingHole:MountingHole_2.5mm_Pad_ViaH1, H2, H3, H4
310uFCapacitor_SMD:C_1206_3216MetricC9, C11, C15
210kResistor_SMD:R_0603_1608MetricR1, R7
212pFCapacitor_SMD:C_0603_1608MetricC13, C14
22.2uFCapacitor_SMD:C_0603_1608MetricC1, C4
24k7Resistor_SMD:R_0603_1608MetricR10, R11
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ1, J2
110nFCapacitor_SMD:C_0603_1608MetricC12
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmHSE1
11k5Resistor_SMD:R_0603_1608MetricR5
11uFCapacitor_SMD:C_0603_1608MetricC10
12.2uFCapacitor_SMD:C_1206_3216MetricC16
139nHInductor_SMD:L_0603_1608MetricL1
147Resistor_SMD:R_0603_1608MetricR6
14u7Capacitor_SMD:C_0603_1608MetricC7
1500mAFuse:Fuse_0805_2012MetricF1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1BC848Package_TO_SOT_SMD:SOT-23Q1
1BlueLED_SMD:LED_0603_1608MetricD4
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ24
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ10
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ8
1GreenLED_SMD:LED_0603_1608MetricD3
1IRLML6402Package_TO_SOT_SMD:SOT-23Q2
1R-785.0-1.0Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THTU4
1RLS-567-RRLS-567-R:IND_RLS-567-RL2
1STM32F405RGT6Package_QFP:LQFP-64_10x10mm_P0.5mmU1
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3
1USB_B_MicroConnector_USB:USB_Micro-B_Amphenol_10104110_HorizontalJ9

Similar boards

  • 4 layers132.5 × 105 mmHEXCORE PCB Design v0, the printed circuit board in 3D

    HEXCORE PCB Design v0

    JoshCrouch/HEXCORE

    HEXCORE is a Hexapod-type robot that includes both a custom remote as well as vision system making use of 2.4GHz RF and WiFi respectively.

    160 parts3
  • 4 layersSTM32F405RGT6-Breakout, the printed circuit board in 3D

    STM32F405RGT6-Breakout

    MURPHYENGINEERING/STM32F405RGT6-Breakout

    Following along with Phil's Lab: https://www.youtube.com/watch?v=t5phi3nT8OU

    62 parts1
  • 4 layers73 × 98 mmALBERT FLIGHTCOMPUTER, the printed circuit board in 3D

    ALBERT FLIGHTCOMPUTER

    felixznr/ALBERT

    Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.

    161 partsMIT
  • 2 layers152.4 × 69.9 mmGb 1 0 pico, the printed circuit board in 3D

    Gb 1 0 pico

    spaceape/gamebit-core-raspberry

    Concept handheld game console

    94 parts
  • 2 layers53.3 × 22.9 mmBluePillF4, the printed circuit board in 3D

    BluePillF4

    rogerclarkmelbourne/STM32_Pill_Boards

    Various STM32 boards in a form factor similar to the Maple Mini or Blue Pill board

    198 parts51
  • 6 layers50 × 81.3 mmBRS HW v1, the printed circuit board in 3D

    BRS HW v1

    lucasnoce/BRS_v1

    Basic Rocket System

    129 parts3MIT

Questions

How big is the STM32F4 Breakout PCB?

It measures 66 × 47.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the STM32F4 Breakout use?

70 parts, built around the STM32F405RGT6, R-785.0-1.0, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32F4 Breakout KiCad files?

From the paagutie/bluerov_acmodule repository on GitHub, at the commit this page was made from: the board is hardware/STM32F4_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32F4 Breakout design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).