Skip to the content
2 layers50 × 40 mmUART to RS422 Board, the printed circuit board in 3D

Open Source UART to RS422 transceiver for students and startups.

Size
50 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
14
Pads
103
Tracks, vias
89, 28
Pours
8
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 May 2026
Updated
16 May 2026

Overview

UART to RS422 Board is an open-source printed circuit board by OpenSpacecraft, from the OpenSpacecraft/Open_UART_to_RS422 repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 50 × 40 mm with 27 parts on 14 nets, routed with 89 tracks and 28 vias.

It is built around the M80-5300842. Its parts include 8 resistors, 8 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the interfaces and adapters boards of this library.

Main components

1

Parts

27
QtyValueFootprintReferences
8D_TVSDiode_SMD:D_SOD-323D1, D2, D3, D4, D5, D6, D7, D8
410Resistor_SMD:R_0402_1005MetricR1, R2, R3, R4
4M3MountingHole:MountingHole_3.2mm_M3_Pad_ViaMH1, MH2, MH3, MH4
3FiducialFiducial:Fiducial_0.5mm_Mask1mmFID1, FID2, FID3
210kResistor_SMD:R_0402_1005MetricR7, R8
2120Resistor_SMD:R_0402_1005MetricR5, R6
2M80-5300842KiCad:M80-53008YYJ1, J2
1100nCapacitor_SMD:C_0805_2012MetricC1
1SN65HVD33DRPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the UART to RS422 Board PCB?

It measures 50 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the UART to RS422 Board use?

27 parts, built around the M80-5300842. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UART to RS422 Board KiCad files?

From the OpenSpacecraft/Open_UART_to_RS422 repository on GitHub, at the commit this page was made from: the board is UART_to_RS422_Board/UART_to_RS422_Board.kicad_pcb and its schematic UART_to_RS422_Board/UART_to_RS422_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UART to RS422 Board design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).