2 layers95.9 × 92.7 mm
2 layers97.2 × 99.1 mm
Control interface boad 2021-2
paripalpp/control_boad_2021-2- Size
- 97.2 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 47
- Pads
- 165
- Tracks, vias
- 275, 103
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Nov 2021
- Updated
- 4 Oct 2023
Overview
Control interface boad 2021-2 is an open-source printed circuit board by paripalpp, from the paripalpp/control_boad_2021-2 repository on GitHub. It is a 2-layer board of 97.2 × 99.1 mm with 40 parts on 47 nets, routed with 275 tracks and 103 vias.
It is built around the MCP2551-I/SN-HG and WS2812B. Its parts include 19 connectors, 5 diodes, 4 switches, 2 resistors and 1 capacitor. It belongs with the interfaces and adapters boards of this library.
Main components
2Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x03_Female | Connector_JST:JST_XA_S03B-XASK-1_1x03_P2.50mm_Horizontal | J6, J9, J10, J11, J12, J15, J16, J17, J18 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 5 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5 |
| 4 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2, J7, J8 |
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | SW1, SW2, SW3, SW4 |
| 2 | Conn_01x04_Female | Connector_JST:JST_XA_S04B-XASK-1_1x04_P2.50mm_Horizontal | J13, J14 |
| 2 | Conn_01x05_Female | Connector_JST:JST_XA_S05B-XASK-1_1x05_P2.50mm_Horizontal | J4, J5 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | Conn_01x02_Female | Connector_JST:JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J19 |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
More from paripalpp/control_boad_2021-2
1Similar boards
- 2 layers96.5 × 132.4 mm
Moisture sensor
bendixsonnenberg/watering_controller
Codewise: an exploration of using embedded rust, specificaly embassy.
30 parts1MIT - 2 layers78 × 75 mm
- 2 layers35 × 35 mm
- 4 layers100 × 50 mm
- 2 layers67.3 × 54 mm
Jeep radio
latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
52 parts30MIT - 2 layers120 × 100 mm
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT - 4 layers115 × 78 mm
- 4 layers103 × 82.4 mm
Questions
How big is the Control interface boad 2021-2 PCB?
It measures 97.2 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control interface boad 2021-2 use?
40 parts, built around the MCP2551-I/SN-HG and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control interface boad 2021-2 KiCad files?
From the paripalpp/control_boad_2021-2 repository on GitHub, at the commit this page was made from: the board is control_interface_boad_2021-2/control_interface_boad_2021-2.kicad_pcb and its schematic control_boad_2021-2/control_boad_2021-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control interface boad 2021-2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask paripalpp before reusing the design.