
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

stm32 nucleof334r8 extension board with 3 half bridge mosfet drivers for inductions, with current measurement
Half bridges adc is an open-source printed circuit board by p4l1ly, from the p4l1ly/half_bridges_adc repository on GitHub. It is a 2-layer board of 76.2 × 55.3 mm with 36 parts on 94 nets, routed with 375 tracks and 30 vias.
It is built around the TSC213IYCT and LF2304NTR. Its parts include 14 resistors, 8 transistors, 6 connectors, 4 ICs and 3 capacitors. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R9, R10 |
| 4 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23-3 | Q3, Q6, Q7, Q8 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J3, J4, J5, J6 |
| 3 | 0R033 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R13, R14 |
| 3 | 5R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R11, R12 |
| 3 | TSC213IYCT | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | IC1, IC3, IC4 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5 |
| 2 | Conn_02x19_Odd_Even | Connector_Samtec_HLE_THT:Samtec_HLE-119-02-xx-DV-PE-LC_2x19_P2.54mm_Horizontal | J1, J2 |
| 2 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 2 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23-3 | Q2, Q5 |
| 1 | 100u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 47m | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C1 |
| 1 | D | Diode_SMD:D_SOD-123 | D1 |
| 1 | LF2304NTR | Beetles:SOIC127P600X175-8N | IC2 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 76.2 × 55.3 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the TSC213IYCT and LF2304NTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the p4l1ly/half_bridges_adc repository on GitHub, at the commit this page was made from: the board is half_bridges_adc.kicad_pcb and its schematic half_bridges_adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask p4l1ly before reusing the design.