Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers73.7 × 57.1 mmBreakout, the printed circuit board in 3D

    Breakout

    nmmallick/f401re_fc

    Amateur prototype for a quad-copter flightcontroller on stm32f4 based chips

    11 parts
  • 2 layers101.6 × 53.3 mmMouseboard, the printed circuit board in 3D

    Mouseboard

    nmz787/rs232-sniffer

    I needed a microcontroller-controlled RS-232 serial mouse, and had an Arduino Mega 2560 laying around.

    17 partsGPL-2.0
  • 2 layers23.4 × 20.8 mmKl24 breakout, the printed circuit board in 3D

    Kl24 breakout

    noahp/kl2_qfn_breakout

    Breakout for Freescale Kinetis MKL24Z64VFM4 in 32-QFN package.

    35 parts
  • 2 layers30.5 × 33 mmXbee breakout, the printed circuit board in 3D

    Xbee breakout

    noahwhite07/xbee-breakout

    A KiCad project containing a breakout board for the XBee 3 2.4 GHz DigiMesh module in Micro form factor

    3 parts
  • 4 layers68 × 45 mmInterface DAC, the printed circuit board in 3D

    Interface DAC

    nonameCCC/PHASE-1

    A compact modularized audio DAC & Headphone Amplifier.

    146 partsGPL-3.0
  • 2 layers45.8 × 40 mmRTL8723DS BreakOut, the printed circuit board in 3D

    RTL8723DS BreakOut

    noniepark/RTL8723DS-BreakOut

    RTL8723DS break out board based on FN-Link 6223A-SRD module (rough work)

    26 parts
  • 2 layers37 × 29.5 mmAC to DC converter-, the printed circuit board in 3D

    AC to DC converter-

    Noraiz963/AC-to-DC-converter-

    A basic AC to DC converter circuit designed in KiCad — full-wave bridge rectifier with capacitor filtering. First PCB design project.

    11 parts
  • 2 layers24.2 × 19.9 mmMotor driver, the printed circuit board in 3D

    Motor driver

    Noraiz963/Dual-Motor-Driver-Board

    A dual H-bridge motor driver board designed in KiCad, built around the DRV8833RTY IC drives two DC motors independently (forward/reverse/speed control), commonly used for small robotics platforms.

    9 parts
  • 2 layers26.4 × 14.9 mmUSB to Serial (UART) converter, the printed circuit board in 3D

    USB to Serial (UART) converter

    Noraiz963/USB-to-Serial-Converter

    A minimal USB-C to UART bridge board built around the CP2102 USB-to-UART bridge IC. This board exposes TX, RX, RST, VBUS, and GND on a standard header, letting you connect any UART-based microcontroller or device to a…

    20 parts
  • 2 layers99.9 × 63.8 mmAmiga-2000-atx adapter pcb, the printed circuit board in 3D

    Amiga-2000-atx adapter pcb

    norly/amiga-2000-atx-adapter-pcb

    Convert an ATX power supply to an A2000 one.

    35 partsCC0-1.0
  • 2 layers66.4 × 64.2 mmAmiga gary breakout, the printed circuit board in 3D

    Amiga gary breakout

    norly/amiga-gary-breakout-pcb

    Breakout PCB for the Amiga's Gary 5719 chip.

    96 partsCC0-1.0
  • 2 layers266.4 × 221.8 mmBridge System On Ramp, the printed circuit board in 3D

    Bridge System On Ramp

    NorthCoastModularCollective/BridgeSystemOnRampPrototype

    a pure data prototype for the bridge system on ramp

    61 partsGPL-3.0
  • 2 layers36 × 16.4 mmAdapter, the printed circuit board in 3D

    Adapter

    Nossva/MooPing

    AgroNomad es un sistema de monitoreo inteligente de ganado que combina collares smart, sensores, posicionamiento GPS y comunicación LoRa para obtener información de los animales directamente desde el campo.

    16 parts
  • 2 layers68 × 48 mmMotor 12V controller, the printed circuit board in 3D

    Motor 12V controller

    not-forest/rp2040-12V-motor-regulator

    Small motor regulator circuit with H-Bridge driver source code for RP2040 Zero microcontroller.

    40 partsMIT
  • 2 layers40 × 20 mmRs485-uart, the printed circuit board in 3D

    Rs485-uart

    Novakov/rs485-uart

    Self-describing board with full-duplex RS485 transceiver

    8 parts
  • 2 layers6.4 × 14 mmMicro T Probe, the printed circuit board in 3D

    Micro T Probe

    nthrd/MicroTProbe

    A breakout for the TMP102 from Texas Instruments small enough to fit inside a ¼ inch copper tube.

    11 partsCC-BY-SA-4.0
  • 2 layers28 × 36 mmEfr32-module breakout, the printed circuit board in 3D

    Efr32-module breakout

    ntn888/efr32_breakout

    Mini breakout for ZYZBP008 Modoule housing an EFR32MG21A020F768IM32. See efr32-module-breakout dir for current. The other dir is an early version with Tuya ZS3L.

    12 parts
  • 2 layers99.1 × 91.4 mmParking sensor node, the printed circuit board in 3D

    Parking sensor node

    num-9i/stm32f411-parking-sensor-node

    STM32F411RE-based parking sensor node with HC-SR04 input capture, Modbus RTU/RS485, UART CLI, and custom carrier PCB.

    14 parts
  • 2 layers56.6 × 57.7 mmDreamcast VGA Adapter, the printed circuit board in 3D

    Dreamcast VGA Adapter

    nunosousa/DC_VGA_Adapter

    This is a project detailing a Dreamcast VGA circuit adapter to provide VGA video output.

    41 parts
  • 4 layers74.3 × 25.4 mmUSB HUB, the printed circuit board in 3D

    USB HUB

    Nx75/USB-HUB

    14 parts
  • 2 layers56 × 54 mmKeyboard adapter board, the printed circuit board in 3D

    Keyboard adapter board

    nxp-appcodehub/an-how-to-implement-8k-usb-keyboard-on-mcxn236

    This application note describes how to implement 8K USB keyboard on MCXN236

    15 parts