4 layers93.3 × 83.9 mm
2 layers30.5 × 33 mm
Xbee breakout
noahwhite07/xbee-breakoutA KiCad project containing a breakout board for the XBee 3 2.4 GHz DigiMesh module in Micro form factor
- Size
- 30.5 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 24
- Pads
- 58
- Tracks, vias
- 80, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Apr 2023
- Updated
- 23 Apr 2023
Overview
Xbee breakout is an open-source printed circuit board by noahwhite07, from the noahwhite07/xbee-breakout repository on GitHub. It is a 2-layer board of 30.5 × 33 mm with 3 parts on 24 nets, routed with 80 tracks and 0 vias.
It is built around the XB3-24Z8CM-J. Its parts include 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x12_Female | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2 |
| 1 | XB3-24Z8CM-J | Library:XB3-24Z8UM-J | U1 |
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
Questions
How big is the Xbee breakout PCB?
It measures 30.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xbee breakout use?
3 parts, built around the XB3-24Z8CM-J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xbee breakout KiCad files?
From the noahwhite07/xbee-breakout repository on GitHub, at the commit this page was made from: the board is xbee_breakout.kicad_pcb and its schematic untitled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xbee breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask noahwhite07 before reusing the design.