2 layers266.4 × 221.8 mm
Bridge System On Ramp
NorthCoastModularCollective/BridgeSystemOnRampPrototype
a pure data prototype for the bridge system on ramp
61 partsGPL-3.0
2 layers266.4 × 221.8 mm
Bridge System On Ramp
NorthCoastModularCollective/BridgeSystemOnRampPrototypea pure data prototype for the bridge system on ramp
- Size
- 266.4 × 221.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 104
- Pads
- 281
- Tracks, vias
- 464, 32
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jul 2022
- Updated
- 6 Dec 2023
Overview
Bridge System On Ramp is an open-source printed circuit board by NorthCoastModularCollective, from the NorthCoastModularCollective/BridgeSystemOnRampPrototype repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 266.4 × 221.8 mm with 61 parts on 104 nets, routed with 464 tracks and 32 vias.
It is built around the TEENSY 4.1, PJ301M-12 and B10K, with the B3W-1000 among its other parts. Its parts include 11 resistors, 2 ICs and 2 connectors. It belongs with the interfaces and adapters boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
4
TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorised
PJ301M-12
3.5mm switched mono phone jack for vertical pcb mountWenzhou QingPu Electronics Co.UncategorisedB10K
RES-TH_RK10J12E002LTH-3P SMT ROHSJLCPCB AssemblyUncategorised
B3W-1000
插件-4P,6x6mm-25℃~+70℃ 1.6N 24V 300,000 cycles 4.3mm 50mA 6mm 6mm IP67 PC Pin Round Button SPST-NO Through Hole Plugin-4P,6x6mm Tactile Switches ROHSOmronTactile Switches
README
README.mdBridgeSystemOnRampPrototype
a pure data prototype for the bridge system on ramp
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | PJ301M-12 | Thonkiconn:PJ301M-12 | Attack IN1, Decay IN1, Filter IN1, LFO Out1, LineIn_L1, LineIn_R1, Mult_A_1, Mult_A_2, Mult_A_3, Mult_B_1, Mult_B_2, Mult_B_3, Seq OUT1, Shaper IN1, Trig OUT1, Waveform IN1 +1 |
| 11 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 11 | LED | LED_THT:LED_D3.0mm | ClockLED1, LED_AttackIN1, LED_DecayIN1, LED_FilterIN1, LED_SeqIN1, LED_ShaperIN1, LED_WaveformIN1, Seq1LED1, Seq2LED1, Seq3LED1, Seq4LED1 |
| 8 | B10k | Alpha potentiometer eurorack:EVUFXL | EnvAttack1, EnvDecay1, Filter1, LFOAmount1, LFORate1, LFOWave1, OscWaveform1, Shaper1 |
| 4 | B10K | Fader Bourne Eurorack:SLIDEPOT-60 | TM2, TM3, TM4, TM5 |
| 2 | A10k | Alpha potentiometer eurorack:EVUFXL | out1, out2 |
| 1 | Adafruit 3488 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | Trigger1 |
| 1 | Audio Connector | Connector_PinSocket_2.00mm:PinSocket_2x08_P2.00mm_Vertical_SMD | J2 |
| 1 | B3W-1000 | B3W1050:B3W1050 | ClockPlay1 |
| 1 | LCD Screen Connector | Connector_PinSocket_2.00mm:PinSocket_2x04_P2.00mm_Vertical_SMD | J1 |
| 1 | PEC11R-4015K-N0024 | PEC11R4015KN0024:PEC11R4015KN0024 | U2 |
| 1 | PJ301M-12 STEREO L | Thonkiconn:PJ301M-12 | Output1 |
| 1 | PJ301M-12 STEREO R | Thonkiconn:PJ301M-12 | Output2 |
| 1 | Teensy4.1 | teensy:Teensy41 | U1 |
More from NorthCoastModularCollective/BridgeSystemOnRampPrototype
5- 2 layers55.9 × 63.5 mm
Euro Power CV Shield
NorthCoastModularCollective/BridgeSystemOnRampPrototype
a pure data prototype for the bridge system on ramp
32 partsGPL-3.0 - 2 layers21.5 × 33.1 mm
Audio Module
NorthCoastModularCollective/BridgeSystemOnRampPrototype
a pure data prototype for the bridge system on ramp
20 partsGPL-3.0 - 2 layers53.3 × 32.2 mm
LCD Module
NorthCoastModularCollective/BridgeSystemOnRampPrototype
a pure data prototype for the bridge system on ramp
11 partsGPL-3.0 - 2 layers45.7 × 73.7 mm
Mux Module CD74HCT4067M
NorthCoastModularCollective/BridgeSystemOnRampPrototype
a pure data prototype for the bridge system on ramp
4 partsGPL-3.0
Similar boards
- 2 layers80.9 × 128.5 mm
Lo Fi Oscillator
NorthCoastModularCollective/Lo-Fi-Oscillator
LFO = Lo Fi Oscillator, Low Frequency Oscillator. Digital all around.
17 parts - 2 layers84.5 × 128.5 mm
Schraeg
barnabywalters/Schraeg
An 8HP eurorack multimode filter module based on the Bastl Cinnamon
116 parts43CC-BY-SA-4.0 - 2 layers40 × 107.5 mm
Utf-8-samplified
wgd-modular/utf-8-samplified
Arduino nano sample based 8-channel drum module
70 parts42 - 2 layers162.6 × 100.3 mm
- 2 layers100 × 70 mm
Utf-9-samplified
wgd-modular/utf-9-samplified
A standalone drum machine based on the bleep drum.
27 parts19 - 16 layers39.6 × 110.9 mm
- 2 layers48.3 × 99.1 mm
Modulation source
JordanAceto/modulation_source
Eurorack compatible pcb with sine/square VCLFO, white and pink noise, and sample & hold
95 parts6 - 2 layers59.1 × 110.7 mm
Questions
How big is the Bridge System On Ramp PCB?
It measures 266.4 × 221.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bridge System On Ramp use?
61 parts, built around the TEENSY 4.1, PJ301M-12, B10K and B3W-1000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bridge System On Ramp KiCad files?
From the NorthCoastModularCollective/BridgeSystemOnRampPrototype repository on GitHub, at the commit this page was made from: the board is hardware/Bridge System On Ramp-backups/Bridge System On Ramp-2023-11-21_193230/Bridge System On Ramp.kicad_pcb and its schematic hardware/Audio Module/Audio Module/Audio Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bridge System On Ramp design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).