Boards by AYUSH-pro-grammer

11 boards

Open-source boards designed in KiCad by AYUSH-pro-grammer on GitHub, from 11 repositories. A board’s address here is its repository’s there.

4 layers40 × 50.5 mm
Esp32-devboard
AYUSH-pro-grammer/esp32-devboard
Development board built using Espressif ESP32-S2FH4 with USB-C, two WS2812B LEDs, 3.3V LDO and GPIO headers, which have 15 pins on both sides.
35 parts1
2 layers60.5 × 63.5 mm
Esp32-flight controller
AYUSH-pro-grammer/esp32-flight-controller
This project presents a basic custom flight controller that is based on the ESP32 and MPU6050 IMU chip. The project reads data from the sensors, uses PID control to stabilize the drone, and drives four motors through…
10 parts1
4 layers47.5 × 43.5 mm
Lora v2
AYUSH-pro-grammer/lora
A LoRa board project that I made in order to figure out how radios really work, rather than just reading about them.
65 parts1
2 layers21 × 51 mm
Devboard
AYUSH-pro-grammer/devboard
Custom RP2040-based development board for embedded systems and hardware prototyping.
35 parts
2 layers95 × 75 mm
Usbhub
AYUSH-pro-grammer/hackpad
Hi there! Here is my personal Hack Club macropad.
23 parts
2 layers38 × 53 mm
Hermas
AYUSH-pro-grammer/hermes
For my Hermes project, I made a compact handheld motion detector based on the MPU6050 IMU, a XIAO RP2040 microcontroller, and a 0.96" OLED screen.
8 parts
2 layers376 × 136 mm
Keyboard
AYUSH-pro-grammer/keyboard
Custom mechanical keyboard PCB designed using KiCad.
166 parts
2 layers45.4 × 41 mm
StarLight
AYUSH-pro-grammer/led-timer
LED chase ("blinky") circuit created for beginners in Stasis.
18 parts
2 layers79 × 48 mm
PathFinder
AYUSH-pro-grammer/pathFinder
Hello!! This is my Hack Club Stasis project its based on reaction time and a bit of fun
8 parts
2 layers230.5 × 167.5 mm
Split keyboard kicad
AYUSH-pro-grammer/split-keyboard
This is a split keyboard. It is divided into 2 parts. I designed it to gain some experience in pcb design, cad modeling and firmware development. It has 22 keys per side, oled display, and rotary encoder.
104 parts
4 layers65 × 75 mm
Stm devboard
AYUSH-pro-grammer/stm-devboard
A custom development board based on the STM32H573RIT6 microcontroller, created in KiCad that serves the purpose of learning about the hardware design, PCB layout, power supply and embedded systems.
70 parts