

Lora v2
A LoRa board project that I made in order to figure out how radios really work, rather than just reading about them.
- Size
- 47.5 × 43.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 76
- Pads
- 238
- Tracks, vias
- 339, 323
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Sep 2026
- Updated
- 25 Sep 2026
Overview
Lora v2 is an open-source printed circuit board by AYUSH-pro-grammer, from the AYUSH-pro-grammer/lora repository on GitHub. It is a 4-layer board of 47.5 × 43.5 mm with 65 parts on 76 nets, routed with 339 tracks and 323 vias.
It is built around the RP2040, SX1262IMLTRT and W25Q16JVSSIQ, with the AP2112K-3.3TRG1 and 0900FM15K0039E among its other parts. Its parts include 28 capacitors, 8 resistors, 5 ICs, 3 inductors and 2 connectors. It belongs with the radio and wireless boards and the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)SX1262IMLTRT
QFN-24-EP(4x4)-148dBm -40℃~+85℃ 1.8V~3.7V 150MHz~960MHz 22dBm 300Kbps 32mA 4.2mA ISM SPI Supports software reset、Power-on reset function、Supports RSSI function transceiver QFN-24-EP(4x4) RF Transceiver ICs ROHSSEMTECHRF Transceiver ICsW25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators0900FM15K0039E
SMD-10P,1.2x2mmSMD-10P,1.2x2mm Ceramic Filters ROHSJohanson DielectricsCeramic Filters
README
README.mdLora
A LoRa board project that I made in order to figure out how radios really work, rather than just reading about them. It was a great way for me to do some PCB design and play around with KiCad, while learning what to do when things don’t go according to plan (which happened quite a bit).
How its works
This board is a custom designed wireless communication module for long range applications. It is based on the dual-core Raspberry Pi RP2040 microcontroller and SX1262 LoRa transceiver.
-
Power & Connectivity. 5V power and data thru USB-C port. An AP2112K-3.3 LDO regulator efficiently steps this down to a stable 3.3V for the system.
-
Processing & Memory - The RP2040 is the brain. The RP2040 requires external memory, so it’s coupled with a W25Q16JV SPI Flash chip to store your firmware.
-
Long-Range RF The SX1262 provides sub-GHz LoRa wireless communication. The RF path is controlled by a PE4259 RF switch and a Johanson Balun to condition the signal for the antenna.
-
Internal Routing: The RP2040 uses its SPI busses to talk to the Flash memory and the SX1262 LoRa chip.
[ USB-C ] ──5V──► [ AP2112K-3.3 LDO ] ──3.3V──┐
▼
[ W25Q16 Flash ] ◄──SPI── [ RP2040 ] ──SPI──► [ SX1262 LoRa ]
(Main Brain) │
▼
[ PE4259 Switch ]
│
▼
[ Antenna ]
📡Images:
3d


Schematic

PCB

Components
Total Physical Components: 53 Capacitors: 28 Resistors: 8 Inductors: 3 Crystals/Oscillators: 2 Push Buttons (Cherry MX): 2 Antenna / Pin Headers: 2 (1 Spring Antenna + 1 Pin Header) Ferrite Beads: 1 RF Baluns: 1 USB-C Connectors: 1 Voltage Regulators (AP2112K): 1 RF Switches (PE4259): 1 Flash Memory (W25Q16JV): 1 SX1262 LoRa IC: 1 RP2040 Microcontroller: 1
BOM
| Qty | Component | Selected Part | Supplier | Link | MOQ | Unit Price (USD) | Order Cost (USD) |
|---|---|---|---|---|---|---|---|
| 1 | LoRa Spring Antenna | BW915SNX17-5W2 | LCSC | Link | 5 | $0.165 | $0.83 |
| 1 | Antenna Pin Header | 2.54-1×40P Pin Header | LCSC | Link | 5 | $0.159 | $0.80 |
| 12 | 100 nF Capacitor | 100 nF 16 V 0402 X7R | LCSC | Link | 100 | $0.005 | $0.46 |
| 1 | 150 pF Capacitor | 150 pF 50 V 0402 X7R | LCSC | Link | 100 | $0.004 | $0.43 |
| 1 | 20 pF Capacitor | 20 pF 50 V 0402 C0G | LCSC | Link | 100 | $0.007 | $0.69 |
| 1 | 220 pF Capacitor | 220 pF 50 V 0402 X7R | LCSC | Link | 100 | $0.003 | $0.25 |
| 1 | 1.8 pF Capacitor | 1.8 pF 50 V 0402 C0G | LCSC | Link | 100 | $0.005 | $0.50 |
| 2 | 15 pF Capacitor | 15 pF 50 V 0402 C0G | LCSC | Link | 100 | $0.004 | $0.36 |
| 2 | 12 pF Capacitor | 12 pF 50 V 0402 C0G | LCSC | Link | 100 | $0.006 | $0.60 |
| 2 | 1 pF Capacitor | 1 pF 50 V 0402 C0G | LCSC | Link | 100 | $0.003 | $0.27 |
| 3 | 160 pF Capacitor | 160 pF 50 V 0402 X7R | LCSC | Link | 100 | $0.005 | $0.51 |
| 2 | 1 µF Capacitor | 1 µF 16 V 0402 X5R | LCSC | Link | 50 | $0.015 | $0.73 |
| 1 | 1 nF Capacitor | 1 nF 50 V 0402 X7R | LCSC | Link | 100 | $0.005 | $0.51 |
| 1 | Ferrite Bead | 100 Ω @ 100 MHz 0402 | LCSC | Link | 20 | $0.006 | $0.12 |
| 1 | RF Balun | 0900FM15D0039E | LCSC | Link | 1 | $1.214 | $1.21 |
| 1 | USB Type-C Connector | TYPE-C 16PIN SMD | LCSC | Link | 20 | $0.071 | $1.43 |
| 1 | 15 nH Inductor | 15 nH ±3% 0402 | LCSC | Link | 10 | $0.041 | $0.41 |
| 1 | 47 nH Inductor | 47 nH ±2% 0402 | LCSC | Link | 10 | $0.064 | $0.64 |
| 1 | 9.1 nH Inductor | 9.1 nH ±2% 0402 | LCSC | Link | 1 | $0.095 | $0.09 |
| 1 | 100 Ω Resistor | 100 Ω ±1% 0402 | LCSC | Link | 100 | $0.004 | $0.37 |
| 2 | 10 kΩ Resistor | 10 kΩ ±1% 0402 | LCSC | Link | 100 | $0.003 | $0.31 |
| 1 | 150 Ω Resistor | 150 Ω ±1% 0402 | LCSC | Link | 100 | $0.002 | $0.19 |
| 1 | 140 Ω Resistor | 140 Ω ±1% 0402 | LCSC | Link | 100 | $0.002 | $0.20 |
| 2 | 5.1 kΩ Resistor | 5.1 kΩ ±1% 0402 | LCSC | Link | 100 | $0.002 | $0.23 |
| 1 | 2.2 kΩ Resistor | 2.2 kΩ ±1% 0402 | LCSC | Link | 100 | $0.004 | $0.35 |
| 1 | Microcontroller | RP2040 (QFN-56) | LCSC | Link | 1 | $0.997 | $1.00 |
| 1 | LoRa Transceiver | SX1262IMLTRT (QFN-24) | LCSC | Link | 1 | $3.222 | $3.22 |
| 1 | RF Switch / LDO | LM337BTG | LCSC | Link | 1 | $0.673 | $0.67 |
| 1 | 3.3 V LDO Regulator | AP2112K-3.3TRG1 | LCSC | Link | 5 | $0.173 | $0.86 |
| 1 | SPI Flash Memory | W25Q16JVSSIQ (SOIC-8) | LCSC | Link | 1 | $1.023 | $1.02 |
| 1 | 32 MHz Crystal | X322532MMB4SI | LCSC | Link | 5 | $0.108 | $0.54 |
| 1 | 12 MHz Crystal | X322512MSB4SI | LCSC | Link | 5 | $0.096 | $0.48 |
| 2 | Tactile Switch | Cherry MX Clear (Pack of 10) | StacksKB | Link | 10 | $0.480 | $4.80 |
| 1 | OLED Display | 0.96 Inch OLED Display Module | RoboCraze | Link | 1 | $1.74 | $1.74 |
| — | Total Procurement Cost (1st Batch Order) | ~$26.82 |
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C25 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C23, C24, C28 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R8 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C26, C27 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | 3.3pF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 1 | 0900FM15K0039 | RF_Converter:Balun_Johanson_0900FM15K0039 | FL1 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y2 |
| 1 | 15uH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 24.4 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 27.4 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 32MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 39pF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 4259-63 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U3 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 47nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 47pF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 9.1nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | AP2112K-3.3TRG1 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Antenna | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | AE1 |
| 1 | C | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SX1262IMLTRT | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U5 |
| 1 | bootsl | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | reset | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
Similar boards
- 4 layers61.8 × 79.6 mm

- 4 layers42 × 42 mm

LaRa Puck
Sai-Santosh09/RouteSync
RouteSync is a compact, LoRa-based communication device designed for long-range messaging and emergency location sharing in environments where cellular networks are unavailable.
55 parts1 - 4 layers38.3 × 49.3 mm

Nexus Cypher
WIZTHECYBER/LoRa-RF-PCB
This is PCB for long rang radio frequency communication
54 parts1CERN-OHL-S-2.0 - 4 layers33 × 44 mm

LoRa ground station
epicgamer720/LoRa-ground-station
LoRa ground station for telemetry with my model rockets
56 parts - 4 layers27.1 × 70.5 mm

- 4 layers40.8 × 58.8 mm

Bridgewatch
Gituseraum/Bridgewatch
Our project is a portable, non-invasive bridge monitoring system designed to continuously collect structural and environmental data.
53 partsMIT - 4 layers37.3 × 39 mm

- 4 layers33.9 × 36.7 mm

Questions
How big is the Lora v2 PCB?
It measures 47.5 × 43.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Lora v2 use?
65 parts, built around the RP2040, SX1262IMLTRT, W25Q16JVSSIQ and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora v2 KiCad files?
From the AYUSH-pro-grammer/lora repository on GitHub, at the commit this page was made from: the board is kicad/lora-v2.kicad_pcb and its schematic kicad/lora-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AYUSH-pro-grammer before reusing the design.