Skip to the content
4 layers42 × 42 mmLaRa Puck, the printed circuit board in 3D

RouteSync is a compact, LoRa-based communication device designed for long-range messaging and emergency location sharing in environments where cellular networks are unavailable.

Size
42 × 42 mm
Copper layers
4
Thickness
1.6 mm
Parts
55
Nets
90
Pads
259
Tracks, vias
516, 50
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jul 2026
Updated
9 Jul 2026

Overview

LaRa Puck is an open-source printed circuit board by Sai-Santosh09, from the Sai-Santosh09/RouteSync repository on GitHub. It is a 4-layer board of 42 × 42 mm with 55 parts on 90 nets, routed with 516 tracks and 50 vias.

It is built around the RP2040, ATGM336H-5N31 and PE4259-63, with the SX1262IMLTRT, W25Q128JVSIQ and AP2112K-3.3 among its other parts. Its parts include 27 capacitors, 9 resistors, 7 ICs, 3 inductors and 2 connectors. It belongs with the radio and wireless boards and the RP2040 boards of this library.

Main components

7

README

README.md

RouteSync

RouteSync is a compact, LoRa-based communication device designed for long-range messaging and emergency location sharing in environments where cellular networks are unavailable. Built around the RP2040 microcontroller and SX1262 LoRa transceiver, it integrates GPS positioning, USB-C LiPo charging, battery management, and an RF switching network into a compact four-layer PCB. Designed for outdoor adventures, remote travel, and emergency communication, RouteSync provides a reliable, low-power platform for transmitting location data over long distances while remaining portable and easy to carry.

Features

  • RP2040 dual-core microcontroller
  • SX1262 LoRa transceiver
  • GPS location tracking
  • USB-C charging with LiPo battery support
  • RF switch and impedance matching network
  • Compact two-layer PCB design
  • Low-power architecture for portable nature

Hardware

  • RP2040
  • SX1262IMLTRT LoRa Transceiver
  • PE4259 RF Switch
  • Q900FM15K0039 RF Front-End Module
  • 32 MHz Crystal Oscillator
  • USB-C Interface
  • LiPo Battery Charger
  • 915 MHz RF Matching Network

Images

Screenshot 2026-07-09 165200 Screenshot 2026-07-09 165144 Screenshot 2026-07-09 165121

Parts

55
QtyValueFootprintReferences
12100nFCapacitor_SMD:C_0402_1005MetricC3, C4, C12, C13, C16, C17, C18, C19, C20, C21, C22, C23
410uFCapacitor_SMD:C_0402_1005MetricC24, C25, C26, C27
215pFCapacitor_SMD:C_0402_1005MetricC10, C11
21kResistor_SMD:R_0402_1005MetricR2, R6
21uFCapacitor_SMD:C_0402_1005MetricC14, C15
227.4Resistor_SMD:R_0402_1005MetricR4, R5
23.3pFCapacitor_SMD:C_0402_1005MetricC7, C9
25.1kResistor_SMD:R_0402_1005MetricR7, R8
10900FM15K0039RF_Converter:Balun_Johanson_0900FM15K0039FL1
1100Resistor_SMD:R_0402_1005MetricR1
110KResistor_SMD:R_0402_1005MetricR3
112MHzCrystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY2
115uHInductor_SMD:L_0402_1005MetricL2
11nFCapacitor_SMD:C_0402_1005MetricC5
12kResistor_SMD:R_0402_1005MetricR9
132MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
139pFCapacitor_SMD:C_0402_1005MetricC6
1470nFCapacitor_SMD:C_0402_1005MetricC8
147nFCapacitor_SMD:C_0402_1005MetricC1
147nHInductor_SMD:L_0402_1005MetricL1
147pFCapacitor_SMD:C_0402_1005MetricC2
19.1nHInductor_SMD:L_0402_1005MetricL3
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U5
1ATGM336H-5N31EasyEDA:GPSM-SMD_ATGM336H-TRU7
1AntennaConnector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalAE1
1BLM15AX102SN1DInductor_SMD:L_0402_1005MetricFB1
1BOOTSELButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW1
1Conn_01x02_PinConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ2
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U6
1PE4259Package_TO_SOT_SMD:SOT-363_SC-70-6U1
1RESETButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW2
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU3
1SX1262IMLTRTPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1W25Q128JVSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU4

Similar boards

  • 4 layers38.3 × 49.3 mmNexus Cypher, the printed circuit board in 3D

    Nexus Cypher

    WIZTHECYBER/LoRa-RF-PCB

    This is PCB for long rang radio frequency communication

    54 parts1CERN-OHL-S-2.0
  • 4 layers33 × 44 mmLoRa ground station, the printed circuit board in 3D

    LoRa ground station

    epicgamer720/LoRa-ground-station

    LoRa ground station for telemetry with my model rockets

    56 parts
  • 4 layers27.1 × 70.5 mmLora, the printed circuit board in 3D

    Lora

    frogtospace/Meshing-the-lora

    My own lora puck name comes from uncreativity :pf:

    71 parts
  • 4 layers40.8 × 58.8 mmBridgewatch, the printed circuit board in 3D

    Bridgewatch

    Gituseraum/Bridgewatch

    Our project is a portable, non-invasive bridge monitoring system designed to continuously collect structural and environmental data.

    53 partsMIT
  • 4 layers37.3 × 39 mmNiRadio, the printed circuit board in 3D

    NiRadio

    Nurazkhan/NiRadio

    PCB for radio transmission?

    77 parts
  • 4 layers33.9 × 36.7 mmLoRa Puck, the printed circuit board in 3D

    LoRa Puck

    SanaDeghat/LoRa-Puck

    just the lora puck

    49 parts
  • 4 layers33.5 × 42 mmCorn LoRa, the printed circuit board in 3D

    Corn LoRa

    VMS-HC/Corn-LoRa

    A LoRa board included in the Corn Series of electronics!

    56 partsMIT
  • 4 layers61.8 × 79.6 mmShipwrecked pcb, the printed circuit board in 3D

    Shipwrecked pcb

    mpkendall/shipwrecked-pcb

    Shipwrecked PCB Badges

    153 parts17Unlicense

Questions

How big is the LaRa Puck PCB?

It measures 42 × 42 mm and has 4 copper layers, 1.6 mm thick.

What parts does the LaRa Puck use?

55 parts, built around the RP2040, ATGM336H-5N31, PE4259-63 and SX1262IMLTRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LaRa Puck KiCad files?

From the Sai-Santosh09/RouteSync repository on GitHub, at the commit this page was made from: the board is PCB files/LaRa Puck.kicad_pcb and its schematic PCB files/LaRa Puck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LaRa Puck design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sai-Santosh09 before reusing the design.