Skip to the content
2 layers376 × 136 mmKeyboard, the printed circuit board in 3D

Custom mechanical keyboard PCB designed using KiCad.

Size
376 × 136 mm
Copper layers
2
Thickness
1.6 mm
Parts
166
Nets
121
Pads
611
Tracks, vias
762, 8
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 May 2026
Updated
26 Jun 2026

Overview

Keyboard is an open-source printed circuit board by AYUSH-pro-grammer, from the AYUSH-pro-grammer/keyboard repository on GitHub. It is a 2-layer board of 376 × 136 mm with 166 parts on 121 nets, routed with 762 tracks and 8 vias.

Its parts include 80 diodes, 80 switches and 2 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

readme.md

keyboard

Custom mechanical keyboard PCB designed using KiCad.

###Motivation

I designed this device in order to get some practical experience in hardware design, PCB manufacturing, and embedded systems programming. Instead of using an off-the-shelf keyboard design, I aimed at learning all the steps required to manufacture a custom keyboard.

Working on this project, I had the opportunity to do schematic design, PCB layouting, components selection, 3D rendering, firmware writing, and manufacturing preparation with the help of KiCad. Thus, having successfully completed the whole design cycle, I got some practical experience in both hardware and software engineering.

It was my intention not only to manufacture a working device but also learn some electronics designing techniques along with problem solving in the engineering field while doing a project that is manufacturable and improvable in the future.

Build Looks

image image image image

Images

Schematic

image

PCB

PCB

PCB Front 3D

PCB Front

PCB Back 3D

PCB Back

3D Model 1

FeaturesScreenshot 2026-06-15 at 5 45 38 PM

3D Model 2

Screenshot 2026-06-15 at 5 45 10 PM
  • Custom Keyboard PCB
  • Designed in KiCad
  • 3D PCB Visualization
  • Gerber Manufacturing Files Included

Repository Structure

text
keyboard/
│
├── code/
├── image/
├── kicad/
├── grb.zip
└── README.md

Files

  • code/ → Firmware / keyboard code
  • image/ → PCB renders and 3D models
  • kicad/ → KiCad project files
  • grb.zip → Gerber files for PCB manufacturing

Bill of Materials

NamePurposeQuantityAvg Cost (USD)Distributor
Cherry MX2A Switch SetKey switches for typing1 Set$42.00Keychron
PBT Keycap SetKeycaps for switches1 Set$13.00Meckeys
Raspberry Pi PicoKeyboard microcontroller1$5.00Robu.in
Rotary Encoder (EC11)Volume/media control knob1$2.00Robu.in
Encoder KnobMounts on rotary encoder1$1.00Robu.in
1N4148 DiodesKey matrix isolation70–100$3.00Robu.in
PCB FabricationCustom keyboard PCB1$25.00JLCPCB / PCBWay
PCB ComponentsHeaders, sockets, passive components1 Lot$5.00Robu.in
MX Hotswap Sockets (Optional)Tool-free switch replacement70$15.00Meckeys / StackKB
USB-C CableConnection to computer1$3.00Robu.in
StabilizersSupport for larger keys1 Set$10.00Meckeys
Screws & StandoffsAssembly hardware1 Lot$3.00Local Supplier
3D Printed CaseKeyboard enclosure1$20.00Local 3D Printing Service
3D Printed Encoder Knob (Optional)Custom encoder knob1$1.00Local 3D Printing Service

Estimated Total

Recommended Hotswap Build Total: ~$144 USD

Author

Created by AYUSH-pro-grammer

Parts

166
QtyValueFootprintReferences
801N914Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +64
80SW_SPSTButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +64
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU3
1LOGOichigo:ichigoi
1LOGOapish:apishG***
1LOGOvinmain:vinmainG***
1RASPBERRY_PI_PICORASPBERRY_PI_PICO:RASPBERRY_PI_PICOU1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmRE1

Similar boards

  • 2 layers99.5 × 83.1 mmFrank, the printed circuit board in 3D

    Frank

    rh1tech/frank

    RP2350 Based Hardware Emulation Platform

    166 parts66GPL-3.0
  • 2 layers320.5 × 127.5 mmFernet, the printed circuit board in 3D

    Fernet

    cfbender/keyboards

    A collection of all of my keyboard projects

    166 parts64MPL-2.0
  • 2 layers200 × 100 mmQROMatch, the printed circuit board in 3D

    QROMatch

    profdc9/ModularTuner

    A Modular Antenna Tuner for a Phased Array Antenna System

    166 parts59
  • 2 layers136.8 × 199.1 mmSt225 20527, the printed circuit board in 3D

    St225 20527

    schlae/HardDriveInfo

    Repair info and schematics for mostly older MFM hard drives

    166 parts38
  • 2 layers100.8 × 108.6 mmCVMod8 V2 Main, the printed circuit board in 3D

    CVMod8 V2 Main

    Thorinair/Avalon-Harmonics

    A collection of Avalon Harmonics branded synthesizer modules.

    166 parts26CC-BY-SA-4.0
  • 2 layers296.5 × 124 mm5AhG3-18S, the printed circuit board in 3D

    5AhG3-18S

    doppelhub/Honda_Insight_LiBCM

    Replacement BCM for G1 Honda Insight Lithium Conversion

    166 parts25CC-BY-SA-4.0
  • 2 layers100 × 99.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 2 layers55.4 × 66 mmOwmBoard, the printed circuit board in 3D

    OwmBoard

    kanengomibako/EffectsPedals

    166 parts14Unlicense

Questions

How big is the Keyboard PCB?

It measures 376 × 136 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard use?

166 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard KiCad files?

From the AYUSH-pro-grammer/keyboard repository on GitHub, at the commit this page was made from: the board is kicad/keyboard.kicad_pcb and its schematic kicad/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask AYUSH-pro-grammer before reusing the design.