Skip to the content
123456

TPS2552DBVR-1

Texas InstrumentsExtended

-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active Low High Side Switch 软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection SOT-23-6 Power Distribution Switches ROHS

Part id
ti/TPS2552DBVR-1
Category
Power Distribution Switches
Package
SOT-23-6
Pins
6
In stock
2,336 at JLCPCB (C140331)
Used on
8 open-source boards

Overview

The TPS2552DBVR-1 is a power Distribution Switche made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active Low High Side Switch 软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection SOT-23-6 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS2552DBVR-1, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 2,336 are in stock at JLCPCB (part C140331). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

1IN2GND3EN4FAULT5ILIM6OUT
EasyEDA_Cloud:TPS2552DBVR-1From EasyEDA

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

Pinout

6
The pins of the TPS2552DBVR-1
PinNameType
1INUnspecified
2GNDUnspecified
3ENUnspecified
4FAULTUnspecified
5ILIMUnspecified
6OUTUnspecified

Open-source boards using it

8
  • 2 layers120.4 × 100.4 mmRelaymux, the printed circuit board in 3D

    Relaymux

    PetteriAimonen/relaymux

    Hardware and firmware for a USB connected relay box

    59 parts18BSD-2-Clause
  • 2 layers36 × 66.5 mmUSB HUB, the printed circuit board in 3D

    USB HUB

    RatnakarSahooVSSUT/4-Port-USB-2.0-Hub

    Custom 4-port USB 2.0 hub PCB designed in KiCad, featuring a GL852G controller, USB-C and USB-A interfaces.

    34 parts1
  • 4 layers70 × 30 mmUsb replug, the printed circuit board in 3D

    Usb replug

    clankagent/usb-replug

    USB 2.0 timed disconnect adapter with CMOS 555; revision B unbuilt prototype for design review

    40 parts
  • 2 layers49 × 19 mmCh32-linke, the printed circuit board in 3D

    Ch32-linke

    cyao1234/linke

    Clone of the LinkE programmer that can do single-wire SWO and DSP

    36 parts
  • 4 layers72.7 × 88.7 mmOptimus Hub, the printed circuit board in 3D

    Optimus Hub

    devisunofficial/Optimus-Hub

    Optimus hub is a USB 2.0 hub which has USB Type-C upstream port and 6 downstream USB Type-A port and one TF-Card reader

    76 parts
  • 4 layers49.5 × 21.6 mmUSB Replug Dongle RevC1, the printed circuit board in 3D

    USB Replug Dongle RevC1

    gslee-dev/portpulse

    USB replug test dongle with KiCad hardware, CH552 firmware, and native C host

    38 partsMIT
  • 4 layers8.8 × 62.9 mmController, the printed circuit board in 3D

    Controller

    Takazudo/zudo-led-block

    led block module

    66 parts
  • 2 layers96.1 × 29.3 mmUSB A Daughterboard, the printed circuit board in 3D

    USB A Daughterboard

    nearestexit/mx-unsaver

    Custom Keyboard & Numpad inspired by the IBM "Unsaver", designed with Onshape and KiCad

    57 parts40MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS2552DBVR-1?

Yes. The symbol is EasyEDA_Cloud:TPS2552DBVR-1 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2552DBVR-1?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TPS2552DBVR-1 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2552DBVR-1?

JLCPCB lists it as part C140331, with 2,336 in stock; the sellers' links on this page open their listings.

What can replace the TPS2552DBVR-1?

Parts like it in the library: the TPS22918DBV by Texas Instruments, the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated and the TPS27081ADDC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS2552DBVR-1?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.