Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
xtech/hw-openmower-utils
OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you…
xtech/hw-openmower-utils
OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you…
xtech/hw-module-gps
Module for using Arduino Shield style GPS units with xBot modular platform
xtech/hw-openmower-utils
OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you…
xtech/hw-module-charger
This hardware version is in beta state. Expect for things to not work at the current state!
xtech/hw-openmower-universal
This hardware version is in beta state. Expect for things to not work at the current state!
xtech/hw-openmower-sabo
OpenMower is an open-source project that upgrades off-the-shelf robotic mowers into modern, smart lawn mowing robots with RTK GPS technology. For more details, check out the OpenMower project.
xtech/hw-openmower-yardforce
This repository contains the design files for a custom mainboard specifically designed for converting YardForce mowers to OpenMower