Skip to the content

Open-source KiCad boards

112 match “dy-ma”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers167.2 × 120.7 mmDyad main right, the printed circuit board in 3D

    Dyad main right

    bathoorn/dyad-keyboard

    Split keyboard: KiCad PCB, 3D-printed case, QMK firmware. Rotary encoder ring per half — round display left, Cirque trackpad right. Bare RP2040 per side.

    149 partsMIT
  • 2 layers149 × 120.7 mmDyad main left, the printed circuit board in 3D

    Dyad main left

    bathoorn/dyad-keyboard

    Split keyboard: KiCad PCB, 3D-printed case, QMK firmware. Rotary encoder ring per half — round display left, Cirque trackpad right. Bare RP2040 per side.

    129 partsMIT
  • 2 layers92 × 69 mmBase controller, the printed circuit board in 3D

    Base controller

    dy-ma/halloween26

    A small LED/resistor practice board used to learn KiCad schematic capture, footprints, routing, silkscreen, and Gerber export. It is not the tractor controller and was not intended for manufacture.

    64 partsCERN-OHL-P-2.0
  • 2 layers15 × 16.5 mmBabys first, the printed circuit board in 3D

    Babys first

    dy-ma/halloween26

    A small LED/resistor practice board used to learn KiCad schematic capture, footprints, routing, silkscreen, and Gerber export. It is not the tractor controller and was not intended for manufacture.

    3 partsCERN-OHL-P-2.0
  • 2 layers63.5 × 63.5 mmMain pcb, the printed circuit board in 3D

    Main pcb

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    45 parts210GPL-3.0
  • 2 layers81 × 70 mmMacroPadV2, the printed circuit board in 3D

    MacroPadV2

    Dynamic0823/MacroPad

    26 parts
  • 4 layersMAZE SOLVER PCB DESIGN, the printed circuit board in 3D

    MAZE SOLVER PCB DESIGN

    lkellyw/MAZE-SOLVER-PCB-DESIGN

    My first PCB designed with STM32 to solve a maze by line following

    86 parts
  • 4 layers48.3 × 52.9 mmDynaButton, the printed circuit board in 3D

    DynaButton

    manhoosbilli1/dynaboard-button-controller

    Dynaboard - large button/control interface board (102 syms, 590 tracks)

    68 parts
  • 2 layers50.8 × 50.8 mmMain pcb v1, the printed circuit board in 3D

    Main pcb v1

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    37 parts210GPL-3.0
  • 2 layers20 × 29 mm5pin magnet fpc, the printed circuit board in 3D

    5pin magnet fpc

    cormoran/dya-dash-keyboard

    DYA Dash portable wireless split keyboard with 25mm trackball

    2 parts57CC-BY-4.0
  • 2 layers500 × 500 mmManual, the printed circuit board in 3D

    Manual

    dynamix/lolly

    Who does not like a LOLLY!

    524 parts
  • 4 layers42 × 42 mmDynossat edu obc, the printed circuit board in 3D

    Dynossat edu obc

    BHDynamics/dynossat-edu-obc

    DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files

    60 parts14
  • 2 layers50 × 20 mmM5stack board dynamixel ttl rs3485, the printed circuit board in 3D

    M5stack board dynamixel ttl rs3485

    kim-xps12/m5stack_board_dynamixel_ttl_rs3485

    When using this repository in your own environment, please import HY2.0-4P.kicadmod into the appropriate library. I import it into the global library so that it can be used from other projects as well.

    20 parts6MIT
  • 2 layers226.3 × 90.5 mmClockclock main, the printed circuit board in 3D

    Clockclock main

    TiboDevC/clockclock

    Personal project of a kinetic clock inspired by Humans Since 1982, using 48 stepper motors to display time in an artistic and dynamic way.

    132 parts3GPL-3.0
  • 2 layersDynotest, the printed circuit board in 3D

    Dynotest

    dynotestpolije/dyno_pcb

    PCB Design dor Dynotest Police

    80 parts
  • 4 layers160 × 90 mmLED Matrix, the printed circuit board in 3D

    LED Matrix

    h2dakhil/FFT-Audio-Spectrum-Analyzer

    Real-time audio-reactive LED matrix powered by an ESP32, featuring custom PCB design, I2S microphone input, and dynamic visual effects through FFT signal processing.

    141 parts
  • 2 layers149.9 × 27.7 mmControl Temp Dysplay, the printed circuit board in 3D

    Control Temp Dysplay

    Ingeros/led-tube-4digits-x-2

    KICAD PCB design for 8 digits of 7-segment display driver by MAX7215

    8 parts
  • 2 layers237.1 × 103.1 mmDyad choc v1, the printed circuit board in 3D

    Dyad choc v1

    OPelham/socius-keyboard

    Inspiration from the following projects: https://github.com/duckyb/urchin/blob/master/README.md - layout https://github.com/dnlbauer/corax56-keyboard/tree/main - ergogen components

    120 parts
  • 2 layers41.5 × 39.5 mmDynamics accservo shield, the printed circuit board in 3D

    Dynamics accservo shield

    practable/dynamics-lab

    Dynamics experiment using uStepper32 stepper motor and offset mass to model resonance

    17 partsAGPL-3.0
  • 2 layers69 × 93.2 mmDynamic clamp pcb, the printed circuit board in 3D

    Dynamic clamp pcb

    shulanx1/dynamic_clamp

    PCB board design and arduino code to perform dynamic clamp experiments

    53 parts
  • 2 layers44.6 × 15.8 mmDya left, the printed circuit board in 3D

    Dya left

    cormoran/dya-dash-keyboard

    DYA Dash portable wireless split keyboard with 25mm trackball

    16 parts57CC-BY-4.0
  • 2 layers44.6 × 15.8 mmDya right ext, the printed circuit board in 3D

    Dya right ext

    cormoran/dya-dash-keyboard

    DYA Dash portable wireless split keyboard with 25mm trackball

    8 parts57CC-BY-4.0
  • 2 layers53.3 × 49.5 mmToad mainboard v03, the printed circuit board in 3D

    Toad mainboard v03

    bombarie/haribo_kimchi_toad

    Code and PCB design for the transmitter and receiver + driver board to control the Toad robot. The wireless control is achieved ising an ExpressLRS wireless link, controlled and read using arduino-compatible…

    14 parts