
Indicator fun V3s
vrubel/indicator-fun-V3s
"indicator.fun" device implementation on the processor Allwinner V3s

DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
Dynossat edu obc is an open-source printed circuit board by BHDynamics, from the BHDynamics/dynossat-edu-obc repository on GitHub. It is a 4-layer board of 42 × 42 mm with 60 parts on 92 nets, routed with 739 tracks and 189 vias.
It is built around the ATSAMD51J20A-AU, MCP9808-E/MS and SGP30, with the GD25Q32C, ICM-20948 and ME6211C33R5G among its other parts. Its parts include 20 capacitors, 13 resistors, 7 ICs, 4 transistors and 4 connectors. It belongs with the SAM D and SAM boards of this library.
Important note: we have updated the Arduino Boards Manager link. Please update your Arduino IDE settings with our new link: https://bhdynamics.github.io/board_index/package_bhdynamics_index.json since the previous one (https://bhdynamics.github.io/board_index/package_dynossat_index.json) NO LONGER WORKS.
DynOSSAT-EDU is the first open source PocketQube educational kit compatible with CircuitPython and Arduino.
This plaform is equipped with all the necessary modules for the operation of a nanosatellite (PocketQube) in Low Earth Orbit (LEO) that would serve as a device for teaching, training, and driving curiosity about the philosophy and technology related to NewSpace.
This repository contains the hardware files for the OBC (On-Board Computer), the module responsible for managing the satellite and process sensor data. It integrates a 9-axis IMU and carries a powerful ATSAMD51.
Hardware in this repository is licenced under CERN OHL v1.2.
Available in this repo's Wiki.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C8, C11, C12, C13, C14, C15, C16, C18, C19, C20 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R9, R10, R11, R12 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6, C17 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R6, R13 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C7, C9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | DMG2305L | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 32.768k - 12.5pF | DynOSSAT:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 510 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 510R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | ATSAMD51J20A-AU | DynOSSAT:QFP50P1200X1200X120-64N | U8 |
| 1 | GD25Q32 | DynOSSAT:WSON-8-1EP_3x4mm_P0.8mm | U1 |
| 1 | ICM-20948 | DynOSSAT:QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm | U5 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | LOGO | DynaSat:Logo_BHDyn_MARK | G*** |
| 1 | LOGO | DynOSSAT:Logo_BHDyn | G*** |
| 1 | MCP9808 | Package_SO:MSOP-8_3x3mm_P0.65mm | U7 |
| 1 | ME6211C | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | ME6211C33 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Main Bus | Connector_PinHeader_1.27mm:PinHeader_2x20_P1.27mm_Vertical_SMD | J1 |
| 1 | Main Bus | Connector_PinSocket_1.27mm:PinSocket_2x20_P1.27mm_Vertical_SMD | J2 |
| 1 | Micro_SD_Card | DynOSSAT:TF-102-18 | J3 |
| 1 | RESET | DynOSSAT:1TS002G-1800-3500-CT | SW1 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | SGP30 | DynOSSAT:SGP30 | U6 |
| 1 | USB_C_Receptacle_USB2.0 | DynOSSAT:U262-161N-4BVC11 | J4 |
| 1 | WS2812B | DynOSSAT:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D3 |
The 59 most common of 60 parts.

vrubel/indicator-fun-V3s
"indicator.fun" device implementation on the processor Allwinner V3s

LEAT-EDGE/ambient-pcb-dkaiot
The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…





maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32
It measures 42 × 42 mm and has 4 copper layers, 1.6 mm thick.
60 parts, built around the ATSAMD51J20A-AU, MCP9808-E/MS, SGP30 and GD25Q32C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BHDynamics/dynossat-edu-obc repository on GitHub, at the commit this page was made from: the board is DynOSSAT-EDU-OBC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BHDynamics before reusing the design.