
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying

PCB Design dor Dynotest Police
Dynotest is an open-source printed circuit board by dynotestpolije, from the dynotestpolije/dyno_pcb repository on GitHub. It is a 2-layer board with 80 parts on 67 nets, routed with 362 tracks and 5 vias.
It is built around the AMS1117-3.3 and AMS1117-5.0. Its parts include 22 resistors, 13 connectors, 7 capacitors, 7 ICs and 4 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | , , , , , , , , , , , , , , , +2 | ||
| 8 | R_US | Resistor_SMD:R_0805_2012Metric | R9, R9, R9, R9, R16, R16, R16, R16 |
| 4 | 2.7K | Resistor_SMD:R_0805_2012Metric | R1, R2, R5, R11 |
| 4 | A | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J1, J1, J1, J1 |
| 4 | B/GND | Connector_Pin:Pin_D1.0mm_L10.0mm | J3, J3, J3, J3 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric | C4, C4, C4, C4 |
| 4 | D | Connector_Pin:Pin_D1.0mm_L10.0mm | J5, J5, J5, J5 |
| 4 | NPN | Package_TO_SOT_SMD:SOT-23W | Q1, Q1, Q1, Q1 |
| 4 | TLP621D4-GB | ul_TLP621-D4-GB:TLP621D4-GB | U1, U2, U3, U7 |
| 3 | 470 | Resistor_SMD:R_0805_2012Metric | R4, R6, R10 |
| 3 | Screw_Terminal_01x06 | TerminalBlock_Altech:Altech_AK300_1x06_P5.00mm_45-Degree | ENCODER_SOCKET1, TERMINAL_POWER_AND_UTILS1, TERMINAL_UTILS_2 |
| 2 | 10 s/d 100 | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | C_Polarized | Capacitor_SMD:C_Elec_6.3x5.8 | C1, C3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100u/16v | Capacitor_SMD:C_Elec_6.3x5.8 | C2 |
| 1 | 2.7k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | L_Ferrite_Coupled | Inductor_THT:Choke_Schaffner_RN122-04-28.0x27.0mm | L1 |
| 1 | MAX6675 Thermocouple | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type175_RT02702HBLC_1x02_P7.50mm_Horizontal | THERMOCOUPLE_SOCKET1 |
| 1 | YAAJ_WeAct_BlackPill_Part_Like | Kicad-STM32:YAAJ_WeAct_BlackPill_2 | U6 |

victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying



barbinbrad/raccoon
Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.

NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️


danheeks/vario
paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys

80 parts, built around the AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dynotestpolije/dyno_pcb repository on GitHub, at the commit this page was made from: the board is dynotest.kicad_pcb and its schematic dynotest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dynotestpolije before reusing the design.