
Main PCB GRUZIK 3.0
NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️

Loved the project? Please consider giving a Star ⭐️
ALL PCBS is an open-source printed circuit board by NYDEREK, from the NYDEREK/LineFollower_GRUZIK3.0 repository on GitHub. It is a 4-layer board of 145 × 71.3 mm with 142 parts on 117 nets, routed with 1,342 tracks and 228 vias.
It is built around the AS5047D, AMS1117-3.3 and AMS1117-5.0, with the LSM6DS3 among its other parts. Its parts include 41 capacitors, 33 resistors, 17 ICs, 5 diodes and 4 connectors. It belongs with the STM32 boards of this library.
Loved the project? Please consider giving a Star ⭐️
GRUZIK2.0 is a lightweight construction (69g) designed for the "Line Follower Light" competition. The robot features Bluetooth communication with a smartphone app and uses a digital sensor instead of analog.
here is a quick video of current progres with GRUZIK3.0 - https://www.youtube.com/watch?v=DpuIcFJMwbQ
The simple lightweight construction (69g) allows the robot to achieve high speed on the track. PCBs were designed in KiCAD 8.0 and manufactured by JLCPCB. The rims were 3D printed with PLA for Kyosho "Mini Z" tires. The light dualsky 150mAh battery provides enough current (max 30C) without adding too much weight (10g). The Pololu 2211 motor (10:1) with max current 1.6A per one requires the use of two separate TB6612FNG motor drivers with connected channels (max 2A per driver). The HC-05 Bluetooth module gives communication range up to 10m. The fast ARM microcontroller STM32G474RET6 (max 170MHz) provides a lot of software capabilities.
GRUZIK3.0 is able to record it's route and save it on uSD card. Results can be represented as XY map and optimized by Python algorithm, robot is able to recreate optimized map in real world achieving max speed for the given route
Thease are simple Bluetooth apps created with MIT App Inventor. Spps start and stop the robot. The Modes pad is responsible for quickly adapting the speed and accuracy of the robot to the route using modes, and the application also displays the battery charge status. Second app is mainly for tweaking PID settings it allows you to change any parameter in seconds
This project wasn't easy but I learned a lot new things in software and hardware. I had a lot of failures during this project but I have never gave up and always kept pushing my own limits.
I mastered PID controll
IMU implemantation
Encoder implementation with PI speed regulator on motors
Mapping and optimizing Paths
Improved my PCB design skills (KiCAD)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C2, C2, C5, C6, C7, C9, C17, C18, C20, C23 |
| 13 | 220 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R11, R15, R16, R17, R18, R19, R20 |
| 12 | 10n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 12 | ~ | Sensor_Optical:KTIR0711S | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8, IC9, IC10, IC11, IC12 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C13, C14, C15, C16, C19, C24 |
| 6 | 39 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12, R13, R14 |
| 6 | VAL** | mouse-bite:mouse-bite-2.54mm-4.66mm | mouse-bite-2.54mm-4.66mm, mouse-bite-2.54mm-4.66mm, mouse-bite-2.54mm-4.66mm, mouse-bite-2.54mm-4.66mm, mouse-bite-2.54mm-4.66mm, mouse-bite-2.54mm-4.66mm |
| 4 | 510R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R7 |
| 4 | BLUE | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D6 |
| 4 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | P1, P2, P3, P4 |
| 4 | Conn_01x04 | Libraries_SN:Encoder_short_conn | Encoder_L1, Encoder_L2, Encoder_L2, Encoder_L2 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R12, R13, R14 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C27 |
| 2 | 47 | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 5p1 | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 6p8 | Capacitor_SMD:C_0603_1608Metric | C8, C10 |
| 2 | AS5047D | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | Encoder_L1, Encoder_L1 |
| 2 | Conn_01x05 | Libraries_SN:IMU_conn | IMU, IMU_Conn1 |
| 2 | Conn_01x17 | Connector_FFC-FPC:Hirose_FH12-17S-0.5SH_1x17-1MP_P0.50mm_Horizontal | GRUZIK3.0, SENSOR |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | KEY, RESET |
| 2 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | Driver L, Driver R |
| 1 | +VIN- | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | +VIN- |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1.0u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 200K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 24Mhz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | 27n | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | X2 |
| 1 | 330K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | PROG |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |
| 1 | Micro_SD_Card | Libraries_SN:micro_SD | SD_Card |
| 1 | NMOS | NMOS_new:NMOS_SN | Q1 |
| 1 | STM32G474RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_DPDT_x2 | Button_Switch_SMD:SW_SPDT_PCM12 | BOOT |
| 1 | ~ | HC-04:HC-04 | U7 |
The 128 most common of 142 parts.

NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️

NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️



NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️


primo-tech/NEMA-17-Stepper-Motor-Controller
STM32L011F4P Based Closed-Loop Controller for NEMA-17 Stepper Motors

NarodniySputnik/Gladiolus-1
Gladiolus-1 - автономный модуль для приема и передачи изображений в формате SSTV (Slow Scan TeleVision) на малом космическом аппарате (МКА) формата CubeSat

Domiko7/NexaSeis
Acquisition and processing server for the NexaSeis collaborative seismic network

C-monC/Drone-simluation
Experimenting with reinforcement learning for drone control.



subbumani12/flightcontroller
A compact STM32F411-based flight controller PCB designed in KiCad for multirotor UAVs and embedded flight-control applications.
It measures 145 × 71.3 mm and has 4 copper layers, 1.6 mm thick.
142 parts, built around the AS5047D, AMS1117-3.3, AMS1117-5.0 and LSM6DS3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NYDEREK/LineFollower_GRUZIK3.0 repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/KiCad project/GRUZIK3.0_PCB_3.0_ALL/ALL_PCBS/ALL_PCBS.kicad_pcb and its schematic Hardware/PCB/KiCad project/Encoder_PCB_LF_3.0/Encoder_PCB/Encoder_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NYDEREK before reusing the design.