
ALL PCBS
NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️

STM32L011F4P Based Closed-Loop Controller for NEMA-17 Stepper Motors
Nema17 Motor Controller is an open-source printed circuit board by primo-tech, from the primo-tech/NEMA-17-Stepper-Motor-Controller repository on GitHub. It is a 4-layer board of 42.1 × 42.1 mm with 42 parts on 47 nets.
It is built around the R-78B5.0-2.0, AS5047D and AMS1117-3.3. Its parts include 11 capacitors, 10 resistors, 6 diodes, 4 ICs and 4 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.
STM32L011F4P Based Closed-Loop Controller for NEMA-17 Stepper Motors
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7, C9, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C10 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C8, C11 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 100@100Hz | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x3 | C13 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | ARM-JTAG/SWD_10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J2 |
| 1 | AS5047D | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U4 |
| 1 | Blue | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | D_Small | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LED_RGBK | LED_SMD:LED_RGB_1210 | D2 |
| 1 | Motor Out | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Pololu DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | Power | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | Power In | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | R-78B5.0-2.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78B-2.0_THT | U2 |
| 1 | RX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | STM32L011F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Serial Out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | TX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |

NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️




matthieuvigne/MiAM_robotics
Generic repo for robotic projects with the former MiAM Eurobot team !

LesKaribous/Karibous-2023-Hardware
Hardware du robot des Karibous pour la Coupe de Robotique (Eurobot) 2022


anshukumar146/GitHub
A compact, self-contained development board for the 8051 microcontroller family (AT89x51xxP), designed in KiCad — built to run 8051 firmware on the bench with nothing more than a barrel-jack power supply and a…
It measures 42.1 × 42.1 mm and has 4 copper layers, 1.6 mm thick.
42 parts, built around the R-78B5.0-2.0, AS5047D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the primo-tech/NEMA-17-Stepper-Motor-Controller repository on GitHub, at the commit this page was made from: the board is Nema17 Motor Controller/Nema17 Motor Controller/Nema17 Motor Controller-backups/Nema17 Motor Controller-2022-01-21_005252/Nema17 Motor Controller.kicad_pcb and its schematic Nema17 Motor Controller/Nema17 Motor Controller/Nema17 Motor Controller-backups/Nema17 Motor Controller-2022-01-21_005252/Nema17 Motor Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask primo-tech before reusing the design.