
Dyad main left
bathoorn/dyad-keyboard
Split keyboard: KiCad PCB, 3D-printed case, QMK firmware. Rotary encoder ring per half — round display left, Cirque trackpad right. Bare RP2040 per side.

Split keyboard: KiCad PCB, 3D-printed case, QMK firmware. Rotary encoder ring per half — round display left, Cirque trackpad right. Bare RP2040 per side.
Dyad main right is an open-source printed circuit board by bathoorn, from the bathoorn/dyad-keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 167.2 × 120.7 mm with 149 parts on 91 nets, routed with 542 tracks and 65 vias.
It is built around the SK6812MINI-E and HC-FPC-0.5-20P-FH20. Its parts include 74 diodes, 37 capacitors, 37 switches and 1 connector. It belongs with the keyboards and input and lEDs and displays boards of this library.
A split keyboard with a rotary encoder ring on each half — a round display inside the left ring, a circular trackpad inside the right. Custom PCBs in KiCad, a 3D-printed case, running QMK.
Dyad: a pair. Two halves, two dials, two boards.
69 keys, 32 left and 37 right, row-staggered. Bare RP2040 on each side.
"A display on top of a knob" normally means the display rotates, which needs a slip ring or a wire loom that survives unlimited rotation.
Dyad inverts it. The display and trackpad are static; the ring rotates around them. A fixed centre post rises through the bearing bore and cantilevers the sensor above the moving parts, so no wire ever moves. Visually and ergonomically it reads as a knob with a screen on top — electrically it's a static part with a ring turning beneath it.
Both rings are 50 mm outside diameter, so the halves are a matched pair.
| MCU | Bare RP2040, one shared controller module used by both halves |
| Left pod | GC9A01 1.28" round LCD, 240×240, SPI |
| Right pod | Cirque Pinnacle TM040040, 40 mm |
| Encoders | EC11, driven by a ring gear from the rotating ring |
| Switches | MX hot-swap, Kailh sockets |
| Per-key RGB | SK6812MINI-E — footprints fitted, populated only if wanted |
| Split link | USB-C to USB-C, half-duplex serial |
Four board designs: one controller module (the only board needing an assembly service), two asymmetric main PCBs, and two knob-module variants.
| Phase | State |
|---|---|
| 0 — Layout | Done. Validated against printed 1:1 mock-ups. |
| 1 — Bench bring-up | Partial. Toolchain, flashing, encoder and Cirque all pass. Display, ribbon-SPI, split and current tests await parts. |
| 2 — Knob mechanism | Not started. |
| 3 — KiCad | Main PCBs generated and placed; controller pin assignment and BOM settled. |
| 4 — Case | Not started. Board outlines and plate cutouts exported for it. |
The main PCBs are a placement scaffold, not a finished layout. DRC reports 195 violations on the left and 253 on the right, none electrical (shorts, clearance, mask bridges). The 32 and 37 errors are all diode/switch courtyard overlaps from the deliberate diode-under-switch placement; the rest is silkscreen. Routing is incomplete, notably the angled thumb keys.
docs/ PLAN.md, WORKFLOW.md, CONTROLLER.md, PHASE1.md, TOOLS.md,
GIT.md, plus printable 1:1 mock-ups
hardware/
interface.yaml the contract between the PCB and case designs
layout/ KLE source of truth, parser, pod-placement solver
pcb-main-*/ the two main PCBs (generated)
pcb-controller/ controller module, and the vendored RP2040 reference
outlines/ board outlines, plate cutouts and STEP, for the case
firmware/ QMK external userspaceNearly everything under hardware/ is generated from the KLE layout.
Regenerate with hardware/generate_main_pcbs.py, export_outlines.py and
export_plate.py — see docs/TOOLS.md for the environment they need.
qmk config user.qmk_home=~/qmk_firmware
qmk config user.overlay_dir=$PWD/firmware
ln -sfn $PWD/firmware/keyboards/dyad ~/qmk_firmware/keyboards/dyad
qmk compile -kb dyad/split -km defaultThe symlink is required: QMK's external userspace holds keymaps and build targets, but not keyboards.
dyad/proto and dyad/split are Phase 1 bring-up targets for dev boards, not
the shipping keyboard definition.
MIT — see LICENSE.
hardware/pcb-controller/upstream/ vendors
RP2040-designguide
(MIT, © 2021 Sleepdealer) as a read-only reference. The key layout originates
from the Hasukey KLE layout.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | C | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +21 |
| 37 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +21 |
| 37 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +21 |
| 31 | SW_Push | marbastlib-mx:SW_MX_HS_CPG151101S11_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW23, SW24 +15 |
| 3 | SW_Push | marbastlib-mx:SW_MX_HS_CPG151101S11_1.25u | SW30, SW33, SW34 |
| 2 | SW_Push | marbastlib-mx:SW_MX_HS_CPG151101S11_1.5u | SW7, SW31 |
| 1 | HC-FPC-0.5-20P-FH20 | dyad:FPC-SMD_20P-P0.50_HC-FPC-0.5-20P-FH20 | J1 |
| 1 | SW_Push | marbastlib-mx:SW_MX_HS_CPG151101S11_1.75u | SW22 |

bathoorn/dyad-keyboard
Split keyboard: KiCad PCB, 3D-printed case, QMK firmware. Rotary encoder ring per half — round display left, Cirque trackpad right. Bare RP2040 per side.

bathoorn/dyad-keyboard
Split keyboard: KiCad PCB, 3D-printed case, QMK firmware. Rotary encoder ring per half — round display left, Cirque trackpad right. Bare RP2040 per side.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 167.2 × 120.7 mm and has 2 copper layers, 1.6 mm thick.
149 parts, built around the SK6812MINI-E and HC-FPC-0.5-20P-FH20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bathoorn/dyad-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/pcb-main-right/dyad-main-right.kicad_pcb and its schematic hardware/pcb-controller/dyad-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).