
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

The Dilemma is a vertical stagger low-profile keyboard with mods.
Dilemma is an open-source printed circuit board by Bastardkb, from the Bastardkb/Dilemma repository on GitHub. It is a 4-layer board of 180.8 × 300.3 mm with 383 parts on 300 nets, routed with 4,153 tracks and 349 vias.
It is built around the RP2040, W25Q128JVSIQ and USBLC6-2P6, with the XC6210B332MR-G, SK6812MINI-E and SK6805-EC15 among its other parts. Its parts include 164 diodes, 62 switches, 32 capacitors, 30 resistors and 28 connectors. It belongs with the RP2040 boards of this library.

The Dilemma is a vertical stagger low-profile keyboard with mods.
There are multiple versions of the dilemma:
| Folder | Name | Size | PCBA | Trackpad | Switches | Additional features |
|---|---|---|---|---|---|---|
3x5_2 | Dilemma DIY V2 | 3x5+2 | no | Cirque | MX, Choc V1 | |
3x5_3 | Dilemma V2 | 3x5+3 | yes | Cirque | MX, Choc V1 | Underglow, per-key RGB, rotary encoders |
3x5_3_procyon | Dilemma V3 hotswap | 3x5+3 | yes | Procyon | Choc V1, hotswap | Underglow, per-key RGB, rotary encoders, VIK |
4x6_4 | Dilemma MAX | 4x6+4 | yes | Cirque | MX, Choc V1 | Underglow, per-key RGB, rotary encoders |
4x6_4_procyon | Dilemma MAX V3 hotswap | 4x6+4 | yes | Procyon | Choc V1, hotswap | Underglow, per-key RGB, rotary encodersk VIK |
You can find the required 3d prints in the mechanical folder.
Most cases require a transparent mid layer to look good. You can either print it, or order it cut in acrylic.
The new revisions are made to be PCBA'd, you can find the gerber, BOM and POS files in the Releases section.
The dilemma v3 hotswap is made to work with a Procyon PCB.
This mod uses I2C on the DIY version, and SPI on the assembled version.
The DIY version requires removing some resistors from the trackpad:
When installing the trackpad mod, you will need:
| Part name | Amount | Link / source |
|---|---|---|
| M3 screw, torx, 6mm | 4 | Conrad |
| M3x5x5 screw insert | 4 | Aliexpress |
| 3d printed parts | See mechanical folder | |
| 40mm cirque trackpad, curved |
If building the PCBA version, you will also need:
| Part name | Amount | Link / source |
|---|---|---|
| 12-position FPC cable, 0.5mm pitch, same side contacts, 100mm, type-B | 1 | Farnell |
If building the DIY version, you will also need:
| Part name | Amount | Link / source |
|---|---|---|
| SOD123 Resistor, 5kOhms | 2 | |
| Cables |
This case is only compatible with the assembled_v2 version !
Add an underglow effect and a beautiful view into the PCB with those acrylic midplates.
Optional metal plates enables the use of tripods through magsafe magnets.
Order the metal plates in 3mm thickness. The metal needs to be magnetized ! Grab the appropriate DXF from the matched folder.
You will need:
| Part name | Amount | Details |
|---|---|---|
| Metal plates | 2 | 3mm |
| Tripods | 2 | Neewer Z flex |
| Magsafe tripod adapter | 2 | Amazon/Aliexpress |
There are a range of community mods available (hex plates, covers...).
You can find more information in the readme in the mechanical/community mods folder.
https://docs.bastardkb.com/bg_dilemma/intro.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | D_matrix | local-libraries:D_SOD-323 | D112, D115, D5002, D5003, D5005, D5006, D5007, D5008, D5009, D5010, D5011, D5012, D5015, D5067, D5068, D5069 +40 |
| 56 | NA_SW_Push | local-libraries:SW_MX_choc | SW101, SW102, SW103, SW104, SW105, SW106, SW107, SW108, SW109, SW112, SW113, SW114, SW115, SW116, SW117, SW118 +40 |
| 56 | SK6812MINI | local-libraries:SK6812_mini_e_corners | D5031, D5032, D5033, D5034, D5035, D5036, D5037, D5038, D5039, D5040, D5041, D5042, D5043, D5044, D5045, D5046 +40 |
| 48 | SK6805-EC15 | local-libraries:LED_SK6805-EC15_1.5x1.5mm_P0.6mm_handsolder | D3, D4, D11, D12, D15, D16, D18, D19, D21, D22, D24, D25, D27, D28, D5013, D5014 +32 |
| 20 | NA_M4 | local-libraries:mousebite | H5013, H5014, H5015, H5016, H5017, H5018, H5019, H5020, H6001, H6002, H6003, H6004, H6005, H6006, H6007, H6008 +4 |
| 18 | NA_M4 | local-libraries:MountingHole_3mm_Pad_Via | H101, H102, H104, H105, H106, H107, H108, H5001, H5002, H5003, H5004, H5005, H5006, H5007, H5009, H5010 +2 |
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C10, C11, C12, C13, C14, C5006, C5007, C5009, C5010, C5011, C5012, C5013, C5014 |
| 12 | Conn_01x01_Socket | local-libraries:testpoint | J5006, J5011, J5012, J5013, J5014, J5015, J5016, J5017, J5018, J5019, J5020, J5021 |
| 10 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 8 | 1µ | Capacitor_SMD:C_0402_1005Metric | C5, C6, C5003, C5004, C5015, C5016, C5017, C5018 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R9, R11, R5002, R5010, R5011 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R3, R8, R5001, R5003, R5008 |
| 6 | 5.1k | Resistor_SMD:R_0402_1005Metric | R4, R5, R10, R5004, R5005, R5009 |
| 4 | 15p | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5005, C5008 |
| 4 | 1µ | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5001, C5002 |
| 4 | 27 | Resistor_SMD:R_0402_1005Metric | R6, R7, R5006, R5007 |
| 4 | 4.7k | local-libraries:R_0402_1005Metric_nolabel | R103, R104, R5013, R5014 |
| 4 | Conn_01x05 | local-libraries:PinHeader_1x05_P1.27mm_Vertical_SMD | J4, J5008, J5009, J5010 |
| 4 | USBLC6-2P6 | local-libraries:SOT-666 | U4, U5003, U5005, U5006 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R5015, R5016 |
| 2 | 5.1k | local-libraries:R_0402_1005Metric_nolabel | R101, R5012 |
| 2 | B5817 | Diode_SMD:D_SOD-323 | D2, D5004 |
| 2 | Cirque | local-libraries:FPC-SMD_FPC05012-09200-.5mm | J113, J5007 |
| 2 | Crystal_GND24 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1, Y5001 |
| 2 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1, FB5001 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D5001 |
| 2 | NA_Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J5, J5002 |
| 2 | NA_Conn_01x04_Female | local-libraries:PinHeader_1x04_P2.54mm_Vertical_debug | J105, J5005 |
| 2 | NA_GC9A01 | local-libraries:PinHeader_1x07_P2.54mm_Vertical | J3, J5004 |
| 2 | NA_OLED | local-libraries:PinHeader_1x04_P2.54mm_Vertical | O101, O5001 |
| 2 | NA_RotaryEncoder_Switch | local-libraries:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_roundholes | SW3002, SW5020 |
| 2 | NA_serial | local-libraries:Jack_3.5mm_PJ320E_Horizontal | J102, J5003 |
| 2 | Polyfuse | Fuse:Fuse_0603_1608Metric | F1, F5001 |
| 2 | RP2040 | 0xLib_Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1, U5002 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_KXT3 | SW1, SW5001 |
| 2 | SW_SPST | Library:PushSwitch | SW5021, SW5022 |
| 2 | USB_C_Receptacle_USB2.0 | 0xLib_USB_Type-C:USB_C_Receptacle_HRO_TYPE-C-31-M-13B | J1, J5001 |
| 2 | W25Q128JVS | drawings:W25Q128JVPIQ | U2, U5004 |
| 2 | XC6210B332MR-G | Package_TO_SOT_SMD:SOT-23-5 | U3, U5001 |
| 1 | NA_Mount | local-libraries:Tenting_Puck | H111 |

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.




christrotter/arcboard-stm32-mk2
Next iteration of the stm32f405 board; paradigm shift means new repo.

ozkan/skywatch
35% ergonomic ortholinear keyboard, powered by RP2040, along with OLED and hotswap sockets support



It measures 180.8 × 300.3 mm and has 4 copper layers, 4.29 mm thick.
383 parts, built around the RP2040, W25Q128JVSIQ, USBLC6-2P6 and XC6210B332MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bastardkb/Dilemma repository on GitHub, at the commit this page was made from: the board is 4x6_4/dilemma.kicad_pcb and its schematic 3x5_2/dilemma.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Bastardkb before reusing the design.