Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
antmicro/alvium-flexible-csi-adapter
Flexible PCB designed to interface Allied Vision embedded vision cameras that feature MIPI CSI-2 with a range of hardware platforms by Antmicro
antmicro/alvium-flexible-csi-adapter
Flexible PCB designed to interface Allied Vision embedded vision cameras that feature MIPI CSI-2 with a range of hardware platforms by Antmicro
antmicro/hdmi-mipi-bridge
Antmicro's open hardware HDMI into MIPI CSI-2 converter
antmicro/dc-scm-rot-jumper-card
A simple jumper board which connects selected QSPI memories to the FPGA configuration interface on Antmicro's Experimental DC-SCM card.
antmicro/raspberry-pi-cm4-csi-adapter
This repository contains open hardware design files for an adapter board allowing to connect video accessories developed by Antmicro to a Raspberry Pi CM4 IO Board over a 22-pin FFC connector.
antmicro/rpi-led-flex-board
This repository contains open hardware design files of the LED flexible PCB designed for Raspberry Pi. It includes a PCA9685BS GPIO expander which drives five RGB LEDs.
antmicro/qomu-dev-board
This repository contains open hardware design files for the Qomu development board based on the QuickLogic EOS S3 Sensor Processing Platform . The design files were created by Antmicro in cooperation with QuickLogic .
antmicro/vna-se-probe
PCB design for a PCB needle probe that can be used with Vector Networ Analyzers
antmicro/fmc-sata-adapter
Adapter board exposing SATA M.2 SSD on FMC board-to-board connector
antmicro/ddr4-spd-breakout-board
This repository contains open hardware design files for an experimental breakout board which allows reading the Serial Presence Detect (SPD) data from a 288-pin, JEDEC-compliant DDR4 DIMM module.
antmicro/environment-sensor-myra-baseboard
This repository contains open hardware design files for Antmicro's Environment Sensor Board variant which includes the MYRA SiP as well as temperature, pressure and humidity sensors.
antmicro/gem-baseboard
This repository contains PCB design files for a demo board compatible with the GEM1 and GEM2 adapter boards.
antmicro/arty-expansion-board
IO expansion board compatible with Digilent Arty A7
antmicro/lpddr4-testbed
Experimental breakout board for a signle 200-ball WFBGA LPDDR4 chip in SO-DIMM DDR4 form factor.
antmicro/job-ict-bottom-board
Adapter board for In-Circuit Testing (ICT) of the Antmicro's Jetson Orin Baseboard
antmicro/gmsl-serializer
Experimental GMSL2 serializer board compatible with Antmicro MIPI CSI video accessories
antmicro/flickerless-led-driver
This project contains open hardware design files for a PCB supporting a pair of infrared (IR) LEDs in an LZ1 LuxiGen package from OSRAM.
antmicro/job-storage-expansion
This project contains open hardware design files for an expansion board compatible with Antmicro's Jetson Orin Baseboard.
antmicro/lpddr5-testbed
Experimental adapter intefacing a single LPDDR5 IC with FPGA-driven memory testers
antmicro/m2-smart-iot-module
https://antmicro.com/blog/2021/08/open-hardware-smart-m2-radio-module-for-iot/
antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.
antmicro/d1600e-psu-breakout
Breakout board for DELL D1600E-S0 Power Supply Unit
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/