Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

2 layers237.4 × 98.6 mm
Batreus
3bnz/atreus
A keyboard with 42 key Atreus layout. Uses Kailh Choc low profile switches with hot-swap sockets. Compatible with ProMicro type controllers, but designed to be used with Nice!Nano.
51 parts44
2 layers81.3 × 58.4 mm
DSOXLAN
aewallin/DSOXLAN
open source hardware DSOXLAN Ethernet module for Agilent/Keysight DSO-X 2000 and 3000 series oscilloscopes
14 parts44CERN-OHL-P-2.0
12 layers165 × 102.7 mm
Data center rdimm ddr5-tester
antmicro/rdimm-ddr5-tester
FPGA-based DRAM tester supporting RDIMM DDR5 memories
797 parts44Apache-2.0
2 layers67.9 × 131 mm
FW16 EPD
arthomnix/FW16_EPD
Touchscreen e-paper input module for Framework Laptop 16
67 parts44CC-BY-SA-4.0
2 layers32 × 61.5 mm
FM3 mainboard
asterics/FLipMouse
The repository for FLipMouse (Finger and LipMouse)
54 parts44
2 layers54.2 × 75.2 mm
KiCAD Design
Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…
70 parts44
2 layers100 × 100 mm
Column driver
CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels
104 parts44
4 layers44 × 44 mm
HSLinkPro
cherry-embedded/HSLink-hardware
A place to release hslink hardware
155 parts44Apache-2.0
4 layers37 × 27.5 mm
ThreeDeeO
citrus3000psi/3DORGB
RGB Project for most 3DO consoles.
59 parts44
2 layers59.9 × 80 mm
SC Template
crsjones/Southern-Cross-Computer-z80
An 'improved' version of the TEC-1 made for Kitsrus in the early 90's
6 parts44MIT
2 layers81.9 × 62.5 mm
Lapse O Matic PCB
curiouselectric/Lapse-O-Matic
This is code, PCB and enclosure design for an ESP32_CAM based wildlife camera
40 parts44
6 layers150 × 100 mm
NV Meter rev b
curtisseizert/Nanovoltmeter
A low noise nanovoltmeter design files and code
552 parts44
2 layers158.9 × 126.3 mm
OpeN64
cy-888/OpeN64
An open source N64 motherboard recreation made in KiCAD.
273 parts44CERN-OHL-P-2.0
2 layers16 × 19 mm
DebugEdge Target Tester
debug-edge/DebugEdge
A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
12 parts44
4 layers223 × 95 mm
Analog i
deimoscontrols/deimos
Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.
568 parts44
2 layers83.3 × 76.1 mm
Srom
derekfountain/zx-spectrum-pico-rom
A Raspberry Pi Pico based device to emulate a ROM on a ZX Spectrum
31 parts44GPL-2.0
2 layers31.2 × 48.1 mm
Logitech Shifter Shield Pro Micro
dmadison/Sim-Racing-Shields
Add-on circuit boards ("shields") for connecting Arduino development boards to sim racing equipment.
22 parts44GPL-3.0
2 layers285.8 × 124.6 mm
Punk75
dsanchezseco/punk75
Ortholinear keyboard with 75 keys and all components through hole
194 parts44GPL-3.0
2 layers40.6 × 108 mm
Useq1
Emute-Lab-Instruments/uSEQ
Hardware & firmware of the uSEQ Live Coding CV & Gate Sequencer
172 parts44
2 layers44.2 × 32.6 mm
Wiring
esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.
49 parts44
4 layers233.4 × 100 mm
486 Board
FoxCutter/486Dev
Repo for the 486 breadboard computer project
119 parts44BSD-3-Clause
2 layers62.2 × 30.5 mm
WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44
2 layers89.2 × 103.5 mm
Oas
hubertciebiada/open-ambient-sensor
OAS — Open Ambient Sensor: DIY multi-sensor indoor environmental monitor (CO2, PM, VOC/NOx, temperature/humidity, mmWave presence) on ESP32-C6 with ESPHome / Home Assistant integration
64 parts44GPL-3.0
2 layers11.6 × 13.8 mm
Lastchencoder
idlehandsdev/thePIDDYBOT
PIDDYBOT is an Open Source Balancing Robot with the aim of teaching PID control.
8 parts44