Skip to the content
2 layers59.9 × 80 mmSC Template, the printed circuit board in 3D

An 'improved' version of the TEC-1 made for Kitsrus in the early 90's

Size
59.9 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
40
Pads
84
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
21 Feb 2021
Updated
12 Oct 2026

Overview

SC Template is an open-source printed circuit board by crsjones, from the crsjones/Southern-Cross-Computer-z80 repository on GitHub, published under the MIT licence. It is a 2-layer board of 59.9 × 80 mm with 6 parts on 40 nets.

README

README.md

Southern Cross Computer

I developed the Z80 Southern Cross Computer for Hong Kong based Kitsrus in 1992/93. The kit was based on the TEC-1 Computer that was designed by John Hardy and Ken Stone in 1983 and appeared in Australia's Talking Electronics Magazine Issue 10 March 1983.

Kitsrus distributed the kit into the US and the UK and was sold online from Hong Kong.

The Southern Cross Computer appeared in Australia's Silicon Chip Magazine in the August 1993 edition. A follow up article appeared in Silicon Chip in December 1993 describing the 8x8 LED Matrix and 8 Channel Relay add-on board.

There is a Facebook group for the Southern Cross SBC [https://www.facebook.com/groups/1553416258519631)

SC-8x8 8 x 8 LED Matrix

The original 8 x8 LED Matrix design plus a couple of revisions.

SC-GBCART

An add-on board that connects a Gameboy FLASH cartridge to the Southern Cross SBC.

SC-SERIAL

A MC6850 serial board based on the Grant Searle 'Minimum System Z80' design.

SC-APU

An add-on card for the AM9511A Arithmetic Processor Unit.

SC-MEM

Expansion memory board. 2x28 pin sockets for either 8kx8 or 32kx8 devices.

SC-CPU

Connect your expansion boards to this CPU board instead of the Southern Cross SBC!

SC-BP

An expandable six slot backplane that connects to the SC expansion connector.

SC-ALED

A hardware, parallel to serial PWM WS2812B addressable RGB LED driver board.

Current Version

The current version of the Southern Cross PCB is 3.3, Gerbers are available in the SouthernCrossSBC_PCB_R33 folder.

The current version of the monitor is 1.8. Source code, listing, binary and INTEL hex files can be found in the SCMonitorV18 folder under the SouthernCrossSBC_Monitor folder.

Parts

6
QtyValueFootprintReferences
4, , ,
140 WAY BOX HEADERSC_footprint:IDC40CN1
140 WAY EDGESC_footprint:EDGE40CN2

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the SC Template PCB?

It measures 59.9 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SC Template use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SC Template KiCad files?

From the crsjones/Southern-Cross-Computer-z80 repository on GitHub, at the commit this page was made from: the board is SC-PCB-Template/SC_Template.kicad_pcb and its schematic SC-PCB-Template/SC_Template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SC Template design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).