Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers97.5 × 96.7 mmLegoesp32, the printed circuit board in 3D

    Legoesp32

    mirkosertic/Megahub

    Megahub is an ESP32-based alternative hub designed for LEGO© enthusiasts and robotics builders.

    26 parts7
  • 2 layersSwap stubs test project, the printed circuit board in 3D

    Swap stubs test project

    MitjaNemec/SwapStubs

    this plugin swaps the electrical connection between two pins. It swaps the labels in the schematics and ratsnest in layout to keep the project in sync.

    2 parts7
  • 2 layers159.5 × 53.3 mmBClock, the printed circuit board in 3D

    BClock

    mkarliner/BelshazzarClock

    Belshazzar Night Clock

    77 parts7
  • 2 layers50.3 × 40.1 mmDRV10987V01, the printed circuit board in 3D

    DRV10987V01

    mlab-modules/DRV10987V01

    Sensorless driver of BLDC and PMSM motors based on DRV10987 controller.

    30 parts7
  • 2 layers40 × 99 mmOutput mixer, the printed circuit board in 3D

    Output mixer

    mohoyt/output_mixer

    Simple 4 channel Eurorack output mixer

    114 parts7CERN-OHL-S-2.0
  • 4 layers90.3 × 94.6 mmThermalV3, the printed circuit board in 3D

    ThermalV3

    moro696/thermal_camera

    A diy thermal camera based on a Flir Lepton 3.5 sensor

    126 parts7
  • 2 layers137 × 39.6 mmAdapter 1U27HP3uAv2, the printed circuit board in 3D

    Adapter 1U27HP3uAv2

    MostlyCoraGrace/EurorackButtonBoard

    A modular, hot-swappable, and patchable, Eurorack-compatible simrig/buttonboard system

    16 parts7MIT
  • 4 layers31 × 68.4 mmThinkmoth nvme m2-basic, the printed circuit board in 3D

    Thinkmoth nvme m2-basic

    mothenjoyer69/thinkmoth-expresscard

    A low cost, open source ExpressCard 34/54 adapter with M.2 2230 and 2242 support

    22 parts7CERN-OHL-S-2.0
  • 4 layers146.2 × 142.6 mmTb3-mxm, the printed circuit board in 3D

    Tb3-mxm

    mothenjoyer69/thundermxm

    An MXM eGPU board featuring an Intel JHL7440 TB3 controller module, with support for 200W of power delivery, and Clevo cards too!

    66 parts7
  • 2 layers99.7 × 99.1 mmDrivewayGateControl, the printed circuit board in 3D

    DrivewayGateControl

    motivemachine/dual_swing_gate_controller

    A relay-driven dual DC motor controller for a double-swing gate opener. Uses Arduino and LoRa. This repo is a mirror for:

    56 parts7MIT
  • 2 layers172 × 230 mmIndegoMower, the printed circuit board in 3D

    IndegoMower

    MS71/IndegoRover

    new MainBoard for Indego Lawn Mower

    34 parts7
  • 2 layers38.5 × 38.5 mmCobalt f405, the printed circuit board in 3D

    Cobalt f405

    msaribekyan/cobalt-f405

    Open Source STM32F405 Flight Controller

    75 parts7GPL-3.0
  • 2 layers49.5 × 45.7 mmSerial, the printed circuit board in 3D

    Serial

    MultipedRobotics/pyservos

    Python servo library for AX-12 and XL-320 smart servos

    31 parts7MIT
  • 2 layers101.6 × 114.3 mmParkbrake, the printed circuit board in 3D

    Parkbrake

    mumme74/CarTransporter

    Electronics systems for a car transporter

    356 parts7
  • 2 layers102 × 49.9 mmRC Trace copy, the printed circuit board in 3D

    RC Trace copy

    MustBeArt/LAIR

    LAIR Pro -- Logic Analyzer Interface for RC-2014 Pro Bus

    13 parts7
  • 2 layers104.1 × 58.4 mmPocket bob, the printed circuit board in 3D

    Pocket bob

    mwelling/pocket-bob

    Simple breakout board for the pocketbeagle boards

    131 parts7
  • 4 layers37 × 85.6 mmPCIe x16-to x8 Debifurcator, the printed circuit board in 3D

    PCIe x16-to x8 Debifurcator

    mwrnd/PCIe_x16-to-x8_Debifurcator

    PCIe x16-to-x8 Debifurcator for Alveo U25

    8 parts7BSD-2-Clause
  • 4 layers99.8 × 119.8 mmLC RFE RevA2, the printed circuit board in 3D

    LC RFE RevA2

    myriadrf/lc-rfe

    LibreCellular RF Front-End Hardware Design

    262 parts7
  • 2 layers50 × 50 mmMysensorsGW, the printed circuit board in 3D

    MysensorsGW

    mysensors/SensebenderGW

    Gateway for MySensors

    76 parts7
  • 4 layers24.4 × 35.6 mmAFE 03, the printed circuit board in 3D

    AFE 03

    NeDaMo93/Wearable_ECG_ADS1293_nrf52840

    Software for a Functional Demonstrator of a Medical Wearable for ECG and Activity Monitoring with Wireless Communication. With ADS1293, nrf52840, LSM6DSO. Includes an Android App and Python GUI.

    41 parts7
  • 2 layers44 × 64 mmUcurrent, the printed circuit board in 3D

    Ucurrent

    NerdyProjects/ucurrent-clone

    This repository holds a clone of the ucurrent gold from https://www.eevblog.com/projects/ucurrent/

    40 parts7
  • 4 layers43.2 × 22.9 mmRiotee probe, the printed circuit board in 3D

    Riotee probe

    NessieCircuits/Riotee_ProbeHardware

    The Riotee probe lets you program a Riotee module that is soldered onto your PCB or plugged into a breadboard. It has a standard 10-pin 0.1" connector compatible with the popular Tag-Connect cables that allow in-circuit…

    74 parts7CERN-OHL-W-2.0
  • 2 layers150 × 107 mmGameshowV2, the printed circuit board in 3D

    GameshowV2

    netik/rpi_gameshow

    A raspberrypi (v3) based four player game show with buzzers, lockout, sounds, and scoring

    37 parts7
  • 4 layers60 × 41 mmEog pcb kicad, the printed circuit board in 3D

    Eog pcb kicad

    neurotech-berkeley/eog-eye-tracking

    Exploration of EOG (electrooculogram) signals as a potential human computer interface

    82 parts7MIT