

Tb3-mxm
An MXM eGPU board featuring an Intel JHL7440 TB3 controller module, with support for 200W of power delivery, and Clevo cards too!
- Size
- 146.2 × 142.6 mm
- Copper layers
- 4
- Thickness
- 1.63 mm
- Parts
- 66
- Nets
- 550
- Pads
- 870
- Tracks, vias
- 550, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2025
- Updated
- 2 Jun 2025
Overview
Tb3-mxm is an open-source printed circuit board by mothenjoyer69, from the mothenjoyer69/thundermxm repository on GitHub. It is a 4-layer board of 146.2 × 142.6 mm with 66 parts on 550 nets, routed with 550 tracks and 40 vias.
It is built around the MP2491CGQB-P, TPS55340RTER and USB5744T/2GX01, with the AS0B826-S78B-7H among its other parts. Its parts include 23 capacitors, 22 resistors, 7 ICs, 5 connectors and 1 fuse.
Main components
4MP2491CGQB-P
QFN-13_2.5X3.0-40℃~+125℃ 1 450uA 490kHz 4V~32V 500mV~30V 6A Adjustable Buck Buck Built-in QFN-13_2.5X3.0 DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersTPS55340RTER
WQFN-16-EP(3x3)-40℃~+125℃@(TA) 1 1.14MHz 2.9V~32V 2.9V~38V 5.25A 500uA Adjustable Boost Boost、SEPIC、Flyback Built-in Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、Frequency synchronization、External compensation No WQFN-16-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersUSB5744T/2GX01
VQFN-56-EP(7x7)-40℃~+85℃ 1.2V、3.3V 5Gbps Hub USB 2.0、USB 3.2 VQFN-56-EP(7x7) USB HUB Controllers ROHSMicrochip TechnologyUSB ICsAS0B826-S78B-7H
SMD,P=0.5mm,卧贴-40℃~+85℃ 314P 7.8mm MXM Surface Mount, Right Angle With post SMD,P=0.5mm,卧贴 PCI / PCIe Connector ROHSFOXCONNEdgeboard Connectors
README
README.mdthundermxm
An open source MXM eGPU board featuring an Intel JHL7440 TB3 controller module, with support for 200W of power. It supports standard MXM3.0A/B cards, as well as Clevo style cards, and supports both TB3 display tunneling and native display output.
- Very WIP Kicad render
Specs:
- Intel JHL7440 TB3 module
- MXM3.0b interface, with full support for Clevo power connectors
- PCIe 3.0 x4 link
- All available I/O broken out:
- 3x DP + 1x HDMI for monitor and VR headset support
- USB3.0 downstream ports for various devices
- Dell-style 15A barrel jack connector
- Fan header with PWM control (Planned)
To-do:
- Finalize schematics, now that reference files for the TB3 module have arrived
- Finish routing (waiting on schematic)
This project wouldn't exist without the help of wifi and her incredible MXM Immobilizer project. I also stole the cool MXM outline from there :3
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C17, C18, C19, C20, C21, C22, C23 |
| 6 | 0 | Resistor_SMD:R_0402_1005Metric | R9, R12, R13, R16, R17, R18 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R10, R11, R14 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8 |
| 3 | 1uF/16v | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5 |
| 3 | R_Small | Resistor_SMD:R_0402_1005Metric | R20, R22, R23 |
| 2 | 0k | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 2 | 10uF/16v | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 220uF/16V | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 22uF/35v | Capacitor_SMD:C_0402_1005Metric | C12, C15 |
| 1 | 0k (NC) | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10n/25v | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 11k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 18p/25v | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 1u/50v | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 2.2uF/25v | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 22uF/25V | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 22uF/25v | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 3v3-DCDC | Vishay Intertech SIC402ACD-T1-GE3:MLP55-32_L5.0-W5.0-P0.50-TL-EP | U2 |
| 1 | 5V-DCDC | Vishay Intertech SIC402ACD-T1-GE3:MLP55-32_L5.0-W5.0-P0.50-TL-EP | U1 |
| 1 | 80k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | AS0B826-S78B-7H | FOXCONN-AS0B826-S78B-7H:CONN-SMD_AS0B826-S78B-7H | MXM1 |
| 1 | DISPLAYPORT_DOUBLE | FOXCONN-3VD11203-DPA1-4H:DP-TH_3VD11203-DPA1-4H | U7 |
| 1 | DP_REAR | FOXCONN-3VD21203-H7U0-4H:USB-TH_3VD21203-H7U0-4H | U8 |
| 1 | Fuse | UL_3588:3588_KEY | F1 |
| 1 | HDMI_FRONT | Korean-Hroparts-Elec-U-C-19DD-W-1:HDMI-SMD_U-C-19DD-W-1 | J3 |
| 1 | Jack-DC | XUNPU_DC-505:DC-505 | J1 |
| 1 | M.2_1_USB | LOTES-APCI0079-P002A-M.2:PCI-SMD_APCI0079-P002A | J7 |
| 1 | M.2_2_PCIE | LOTES-APCI0079-P002A-M.2:PCI-SMD_APCI0079-P002A | J8 |
| 1 | MP2491CGQB-P | MP2491CGQB-P:MP2491CGQBP | IC1 |
| 1 | TPS55340RTER | TI-TPS55340RTER:VQFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U5 |
| 1 | USB2_FRONT1 | HC-USB3.0-C345-P:USB-A-SMD_HC-USB3.0-C345-P | USB1 |
| 1 | USB2_FRONT2 | HC-USB3.0-C345-P:USB-A-SMD_HC-USB3.0-C345-P | USB2 |
| 1 | USB3_DOUBLE | usb3.0-stack:MOLEX_0484060003 | J4 |
| 1 | USB5744T/2GX01 | Microchip-Tech-USB5744T-2GX01:VQFN-56_L7.0-W7.0-P0.40-BR-EP4.6 | U4 |
Similar boards
- 6 layers249.4 × 111.5 mm

- 2 layers118.7 × 72.5 mm

FRMW Expansion stuff
a-little-wifi/frmw-16-MXM-E-port
MXM GPU + Dell E-Port dock adapter for 16" Framework laptop expansion bay
93 parts17 - 2 layers82 × 70 mm

- 4 layers180 × 120 mm

MG ZS V2
damienmaguire/MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
177 parts17GPL-3.0 - 4 layers50 × 50 mm

- 2 layers90 × 83.5 mm

- 4 layers36 × 40 mm

- 4 layers29 × 74 mm

Controller
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
66 parts3.8kApache-2.0
Questions
How big is the Tb3-mxm PCB?
It measures 146.2 × 142.6 mm and has 4 copper layers, 1.63 mm thick.
What parts does the Tb3-mxm use?
66 parts, built around the MP2491CGQB-P, TPS55340RTER, USB5744T/2GX01 and AS0B826-S78B-7H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tb3-mxm KiCad files?
From the mothenjoyer69/thundermxm repository on GitHub, at the commit this page was made from: the board is tb3-mxm.kicad_pcb and its schematic MXM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tb3-mxm design in my own project?
Its repository states no licence, so its author keeps all rights: ask mothenjoyer69 before reusing the design.