

Power Regulator 12.6v input
- Size
- 90 × 83.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 73
- Pads
- 224
- Tracks, vias
- 228, 153
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Jan 2026
- Updated
- 6 Nov 2026
Overview
Power Regulator 12.6v input is an open-source printed circuit board by unl-rocketry, from the unl-rocketry/SlotBox-PCB repository on GitHub. It is a 2-layer board of 90 × 83.5 mm with 65 parts on 73 nets, routed with 228 tracks and 153 vias.
It is built around the TPS54JA20RWWR, TPS55340RTER and TPS563203DRL, with the B540C-13-F-MS among its other parts. Its parts include 29 capacitors, 15 resistors, 4 ICs, 3 connectors and 3 inductors. It belongs with the power boards of this library.
Main components
4TPS54JA20RWWR
VQFN-21-HR(4x3)-40℃~+125℃@(TJ) 1 12A 2.7V~16V 600kHz、800kHz、1MHz 850uA 900mV~5.5V Adjustable Buck Buck Built-in Yes VQFN-21-HR(4x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS55340RTER
WQFN-16-EP(3x3)-40℃~+125℃@(TA) 1 1.14MHz 2.9V~32V 2.9V~38V 5.25A 500uA Adjustable Boost Boost、SEPIC、Flyback Built-in Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、Frequency synchronization、External compensation No WQFN-16-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS563203DRL
SOT-563-40℃~+125℃@(TJ) 110uA 3A 4.2V~17V 600kHz 600mV~7V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersB540C-13-F-MS
SMC-65℃~+125℃ 1 Independent 175A 40V 500uA@40V 5A 750mV@5A SMC Schottky Diodes ROHSMSKSEMISchottky Diodes
README
README.mdSlotBox PCB Files and Documentation
Merging and Branches
Since this is confusing, here are some tips for that.
To update a branch
git checkout main
git pull main
git checkout <desired branch>
git merge main
git pushTo merge from a branch into main
git checkout <desired branch>
git pull
git checkout main
git merge <desired branch>
git pushParts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_D1.0mm | +5V, +24v, +Batt 5v, +Batt 24v, 3.3 relay logic input, 3.3V out, 5v in to 3.3, 24V pre Relay, Relay Logic |
| 6 | C4.7uF | Capacitor_SMD:C_0603_1608Metric | C9, C19, C25, C26, C30, C31 |
| 5 | C1uF | Capacitor_SMD:C_0603_1608Metric | C18, C20, C27, C28, C32 |
| 4 | R10k | Resistor_SMD:R_0603_1608Metric | R4, R15, R18, R22 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric | C14, C34, C35 |
| 3 | C100nF | Capacitor_SMD:C_0603_1608Metric | C8, C16, C23 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | C100uf | Capacitor_SMD:C_1206_3216Metric | C24, C29 |
| 2 | R47.5k | Resistor_SMD:R_0603_1608Metric | R13, R16 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 135k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | B540C-13-F | B540C-13-F:SMC_DIO | CR1 |
| 1 | C1.8nF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | C10uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | C2.2uF | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | C22pf | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | C27nF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | C82nF | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Jack-DC | XT-Conn:AMASS_XT60-M_1x02_P7.20mm_Vertical | J2 |
| 1 | L1uH | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | L8.2uH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | R1.54k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | R100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | R187k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | R220 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | R30.1k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | R4.87k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | R45.3k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | SE2-30 | SE2-30:SE2-30 | J1 |
| 1 | SPRH125-4R7N | Inductor_SMD:L_12x12mm_H6mm | L3 |
| 1 | SW_SPDT_321 | SS-5:SS-5 | SW1 |
| 1 | TLP3542 | Package_DIP:DIP-5-6_W7.62mm | U1 |
| 1 | TPS54JA20RWWR | TPS54JA20RWWR:RWW0021A | U4 |
| 1 | TPS55340RTER | TPS55340RTER:RTE0016C_NV | U2 |
| 1 | TPS563203 | Package_TO_SOT_SMD:SOT-563 | U3 |
More from unl-rocketry/SlotBox-PCB
5- 2 layers83.5 × 250 mm

- 2 layers90 × 83.5 mm

- 2 layers90 × 83.5 mm

- 2 layers90 × 83.5 mm

- 2 layers90 × 83.5 mm

Similar boards
- 2 layers143 × 40.6 mm

- 4 layers102.5 × 35 mm

- 4 layers159.9 × 99.9 mm

- 4 layers180 × 120 mm

MG ZS V2
damienmaguire/MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
177 parts17GPL-3.0 - 4 layers146.2 × 142.6 mm

Tb3-mxm
mothenjoyer69/thundermxm
An MXM eGPU board featuring an Intel JHL7440 TB3 controller module, with support for 200W of power delivery, and Clevo cards too!
66 parts7 - 4 layers50 × 50 mm

- 4 layers36 × 40 mm

- 4 layers55 × 55 mm

Questions
How big is the Power Regulator 12.6v input PCB?
It measures 90 × 83.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power Regulator 12.6v input use?
65 parts, built around the TPS54JA20RWWR, TPS55340RTER, TPS563203DRL and B540C-13-F-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power Regulator 12.6v input KiCad files?
From the unl-rocketry/SlotBox-PCB repository on GitHub, at the commit this page was made from: the board is PCB/Power_Regulator_12.6v_input/Power_Regulator_12.6v_input.kicad_pcb and its schematic PCB/Backplane/Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power Regulator 12.6v input design in my own project?
Its repository states no licence, so its author keeps all rights: ask unl-rocketry before reusing the design.