Skip to the content

TPS55340RTER

Texas InstrumentsExtended

-40℃~+125℃@(TA) 1 1.14MHz 2.9V~32V 2.9V~38V 5.25A 500uA Adjustable Boost Boost、SEPIC、Flyback Built-in Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、Frequency synchronization、External compensation No WQFN-16-EP(3x3) DC-DC Converters ROHS

Part id
ti/TPS55340RTER
Category
DC DC Converters
Package
WQFN-16-EP(3x3)
Pins
17
In stock
23,008 at JLCPCB (C169167)
Used on
5 open-source boards

Overview

The TPS55340RTER is a DC DC Converter made by Texas Instruments in a WQFN-16-EP(3x3) package with 17 pins. -40℃~+125℃@(TA) 1 1.14MHz 2.9V~32V 2.9V~38V 5.25A 500uA Adjustable Boost Boost、SEPIC、Flyback Built-in Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、Frequency synchronization、External compensation No WQFN-16-EP(3x3) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (tinkerforge:TPS55340, from Tinkerforge) and its footprint (EasyEDA_Cloud:VQFN-16_L3.0-W3.0-P0.50-BL-EP1.7, from EasyEDA), ready for a KiCad board. 23,008 are in stock at JLCPCB (part C169167). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

2VIN3EN9FREQ14NC10NC4SS6AGND11PGND12PGND13PGND5SYNC1SW16SW15SW8FB7COMP17PP
tinkerforge:TPS55340From Tinkerforge

Footprint

EasyEDA_Cloud:VQFN-16_L3.0-W3.0-P0.50-BL-EP1.7From EasyEDA

Pinout

17
The pins of the TPS55340RTER
PinNameType
1SWInput
2VINInput
3ENInput
4SSInput
5SYNCInput
6AGNDInput
7COMPInput
8FBInput
9FREQInput
10NCInput
11PGNDInput
12PGNDInput
13PGNDInput
14NCInput
15SWInput
16SWInput
17PPInput

Open-source boards using it

5
  • 4 layers180 × 120 mmMG ZS V2, the printed circuit board in 3D

    MG ZS V2

    damienmaguire/MG-EV-Inverter

    Reverse engineering of the drive motor and inverter used in MG Electric Vehicles

    177 parts17GPL-3.0
  • 4 layers146.2 × 142.6 mmTb3-mxm, the printed circuit board in 3D

    Tb3-mxm

    mothenjoyer69/thundermxm

    An MXM eGPU board featuring an Intel JHL7440 TB3 controller module, with support for 200W of power delivery, and Clevo cards too!

    66 parts7
  • 4 layers50 × 50 mmWireslesslock, the printed circuit board in 3D

    Wireslesslock

    Shehroz30/wireslesslock

    69 partsMIT

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the TPS55340RTER?

Yes. The symbol is tinkerforge:TPS55340 and the footprint EasyEDA_Cloud:VQFN-16_L3.0-W3.0-P0.50-BL-EP1.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS55340RTER?

WQFN-16-EP(3x3), with 17 pins. Its footprint is drawn on this page.

Where is the TPS55340RTER datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS55340RTER?

JLCPCB lists it as part C169167, with 23,008 in stock; the sellers' links on this page open their listings.

What can replace the TPS55340RTER?

Parts like it in the library: the MIC2101YML-TR by Microchip Technology and the RT8202AGQW by Richtek Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS55340RTER?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.