
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers

- 2 layers196.9 × 114.3 mm

CobraPin v1 00
cobra18t/CobraPin
Pinball Controller based on OPP and designed for use with MPF
243 parts17GPL-3.0 - 2 layers94 × 154.2 mm

Saintcon2018
compukidmike/Saintcon2018
NOTE: Female headers will be provided with the main badge this year, so minbadge makers do not need to provide their own.
295 parts17 - 2 layers91.3 × 57.5 mm

- 2 layers11 × 1 mm

- 2 layers62 × 42 mm

SharpMemoryLcdBreakout PANELIZED
crehmann/Sharp-Memory-LCD-Breakout
See the BOM csv file in the release zip-file for LCSC part numbers
46 parts17 - 6 layers99.5 × 100 mm

Zynq test
cropinghigh/zynq_a9_mb
Zynq 7z010 dev/main board based on components from Antminer S9 control board
528 parts17 - 4 layers124.3 × 113.5 mm

Badge2018
cryptovillage/badge2018
The EFM8 firmware has only been built inside Simplicity Studio.
118 parts17 - 4 layers55.5 × 0 mm

- 4 layers180 × 120 mm

MG ZS V2
damienmaguire/MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
177 parts17GPL-3.0 - 2 layers138.1 × 106 mm

Klorball35 right
danbowles/klorball35
Each half carries a 5-column × 3-row main matrix plus a 3-key (left) and 2-key (right)thumb cluster. The right hand gives up one key to make room for the trackball, so the two halves are 18 (left) + 17 (right) = 35 keys.
26 parts17 - 4 layers60 × 110 mm

Retrospector Components
dchwebb/Kishoof
Eurorack Wavetable Synthesizer; Dual channel; 64MB internal storage accessed via USB
123 parts17 - 2 layers70.6 × 88.6 mm

- 2 layers64 × 30 mm

Satecard
devinacker/satecard
CompactFlash adapter for Satellaview EXT port with example SNES code
2 parts17 - 2 layers78.7 × 74.7 mm

2channel mini speedy
digmorepaka/speeduino-mini-2-channel
A 75x78mm speeduino board featuring robotdyn mega 2560 pro microcontroller and all the basics needed to get a 2 channel setup. This is meant for simple engines like motorcycle 1cyls and V-Twins
63 parts17 - 2 layers169.4 × 48.8 mm

Usb morse keyer
dilshan/usb-morse-keyer
PIC16F886 based CW auto key controller with USB support
84 parts17MIT - 2 layers42.2 × 29 mm

AD3 Breakout Board
dJOS1475/FF_AD3_Klipper
FlashForge Adventurer 3 - Klipper / BTT SKR Mini E3 Upgrade
9 parts17GPL-3.0 - 2 layers278.8 × 76.2 mm

- 2 layers22 × 16.5 mm

- 2 layers23 × 92 mm

BlackMageEyes
dukeofdummies/BlackMageEyes
For the code behind the eyes here https://www.youtube.com/watch?v=K9V43iSXRQA
6 parts17 - 2 layers203.2 × 114.6 mm

- 2 layers790 × 390 mm

- 4 layers34.8 × 18 mm

- 4 layers163.4 × 59.5 mm
