Skip to the content
2 layers138.1 × 106 mmKlorball35 right, the printed circuit board in 3D

Klorball35 right

danbowles/klorball3517

Each half carries a 5-column × 3-row main matrix plus a 3-key (left) and 2-key (right)thumb cluster. The right hand gives up one key to make room for the trackball, so the two halves are 18 (left) + 17 (right) = 35 keys.

Size
138.1 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
36
Pads
234
Tracks, vias
329, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Jan 2026
Updated
25 Jun 2026

Overview

Klorball35 right is an open-source printed circuit board by danbowles, from the danbowles/klorball35 repository on GitHub. It is a 2-layer board of 138.1 × 106 mm with 26 parts on 36 nets, routed with 329 tracks and 0 vias.

Its parts include 17 switches, 2 connectors and 1 IC.

README

README.md

KLORBALL35

Klorball35 layout

Klorball35 is a 35-key, column-staggered, low-profile split keyboard with an integrated optical trackball. It's derived from KLOR and Keyball, built with Kivipallur as a starting point in Ergogen, and designed around Kailh Choc V1 switches, an 0xCB Helios (RP2040) controller per half, and a PixArt PMW3360 sensor on the right hand.


LAYOUT

Each half carries a 5-column × 3-row main matrix plus a 3-key (left) and 2-key (right)thumb cluster. The right hand gives up one key to make room for the trackball, so the two halves are 18 (left) + 17 (right) = 35 keys.

  • Column-staggered, splayed columns with per-column stagger/splay tuning
  • Kailh Choc V1 (low-profile) switches, 18 × 17 mm spacing
  • TRRS jack for the inter-half connection
  • M2 mounting holes and a matching FR4 switchplate per half
  • PMW3360 optical trackball on the right half via the Kivipallur breakout

IMAGES

Klorball35 fully assembled

▲ The assembled Klorball35.

Klorball35 mounted on a tripod

▲ Mounted on a tripod.

Klorball35 right-half trackball assembly

▲ The right-half trackball assembly.


PCB

kicad/ holds the KiCad 9 projects:

ProjectDescription
klorball35_leftLeft-half PCB + schematic
klorball35_rightRight-half PCB + schematic (trackball)
klorball35_plate_leftLeft FR4 switchplate
klorball35_plate_rightRight FR4 switchplate
Kivipallur_PMW3360_breakoutPMW3360 trackball sensor breakout

Shared footprint and symbol libraries (Keebio-Parts.pretty, keyswitches.pretty, Helios.pretty, Mounting_Hole.pretty, etc.) live alongside the projects.

Manufacturing Gerbers are in gerbers/:

  • GERBER-klorball35_left.zip / GERBER-klorball35_right.zip — main PCBs
  • GERBER-klorball35_plate_left.zip / GERBER-klorball35_plate_right.zip — FR4 switchplates
  • GERBER-Kivipallur_PMW3360_breakout.zip (+ BOM and CPL CSVs) — trackball breakout

SOURCE

The whole board is generated from a single Ergogen definition, config.yml (Ergogen 4.2.1). Regenerate the outlines and PCB scaffolds with:

sh
ergogen config.yml --svg -o output

Outputs land in output/ (outlines/ as DXF/SVG and pcbs/ as KiCad files), which are then finished by hand in KiCad.


SWITCHPLATE

A matching FR4 switchplate is generated for each half (klorball35_plate_left / klorball35_plate_right, with Gerbers in gerbers/). The plate outline is shared with the main board; only the key cutouts and M2 screw holes differ.


TRACKBALL

The right half integrates a PixArt PMW3360DM-T2QU optical sensor on the Kivipallur breakout (kicad/Kivipallur_PMW3360_breakout). It connects to the right-hand Helios over SPI through the breakout slot in the PCB.


FIRMWARE

Each half runs on an 0xCB Helios RP2040 controller (Pro Micro-compatible footprint), so the board can run QMK or ZMK. A dedicated Klorball35 firmware config isn't published yet; the stock KLOR QMK config and KLOR ZMK config are good starting points, with the matrix and the PMW3360 trackball wired up to match this board.


CREDITS

Built by danbowles.

Parts

26
QtyValueFootprintReferences
17SW_Pushkeyswitches:Kailh_socket_PG1350_optionalSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +1
6MountingHoleMounting_Hole:MountingHole_2.2mm_M2_PadH7, H7, H7, H7, H7, H7
1Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ2
1HeliosHelios:Helios_ACHU1
1TRRSKeebio-Parts:TRRS-PJ-320AJ1

More from danbowles/klorball35

2
  • 2 layers138.1 × 106 mmKlorball35 left, the printed circuit board in 3D

    Klorball35 left

    danbowles/klorball35

    Each half carries a 5-column × 3-row main matrix plus a 3-key (left) and 2-key (right)thumb cluster. The right hand gives up one key to make room for the trackball, so the two halves are 18 (left) + 17 (right) = 35 keys.

    25 parts17
  • 2 layers22 × 25 mmKivipallur PMW3360 breakout, the printed circuit board in 3D

    Kivipallur PMW3360 breakout

    danbowles/klorball35

    Each half carries a 5-column × 3-row main matrix plus a 3-key (left) and 2-key (right)thumb cluster. The right hand gives up one key to make room for the trackball, so the two halves are 18 (left) + 17 (right) = 35 keys.

    10 parts17

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Klorball35 right PCB?

It measures 138.1 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Klorball35 right use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Klorball35 right KiCad files?

From the danbowles/klorball35 repository on GitHub, at the commit this page was made from: the board is kicad/klorball35_right/klorball35_right.kicad_pcb and its schematic kicad/Kivipallur_PMW3360_breakout/Kivipallur_PMW3360_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Klorball35 right design in my own project?

Its repository states no licence, so its author keeps all rights: ask danbowles before reusing the design.