Skip to the content

Open-source KiCad boards

172 match “SWD”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 6 layers30.5 × 18 mmUSB SWD, the printed circuit board in 3D

    USB SWD

    HarmonInstruments/JTAG_SWD

    A USB to JTAG and SWD adapter for use with OpenOCD

    46 parts5GPL-3.0
  • 6 layers26 × 42.5 mmStdc14-to arm10+8pin, the printed circuit board in 3D

    Stdc14-to arm10+8pin

    edwa-rd/swd-converter

    STDC14 / MIPI10 / ARM10 / 4x2pin conversion board(s)

    13 partsGPL-3.0
  • 6 layers237.9 × 80.5 mmXG Mobile Dock, the printed circuit board in 3D

    XG Mobile Dock

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    300 parts712CC-BY-4.0
  • 6 layers76.2 × 20.3 mmDEV G2-NANO, the printed circuit board in 3D

    DEV G2-NANO

    theta-machines/DEV-G2-NANO

    The G2 Nano is powered by a record-breaking 1 GHz Arm Cortex-M7 processor, combining the performance of an application processor with real-time determinism.

    141 parts346CERN-OHL-P-2.0
  • 6 layers90 × 153 mmBlackpants, the printed circuit board in 3D

    Blackpants

    o7-machinehum/Blackpants

    Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

    300 parts189MIT
  • 6 layers50.2 × 77.2 mmMeko, the printed circuit board in 3D

    Meko

    KOEGlike/meko

    A linux music player with ddr3, a 70hz e-paper display and a haptic touchpad

    274 parts90GPL-3.0
  • 8 layers163.5 × 123.5 mmYeti, the printed circuit board in 3D

    Yeti

    PionixPublic/reference-hardware

    BelayBox reference hardware

    278 parts70CERN-OHL-P-2.0
  • 6 layers47 × 30 mmDP Aux MITM V0, the printed circuit board in 3D

    DP Aux MITM V0

    JX5S/DP_aux_emulator

    Board for modifying traffic on DP-aux. Specifically, board is made for correcting false information provided by the PSVR2 making it not work on PC. Except for DP-aux, it is a passive extension of USB-C.

    87 parts48MIT
  • 6 layers98.6 × 88 mmSympetrum V3 FF3, the printed circuit board in 3D

    Sympetrum V3 FF3

    borgel/sympetrum-v3

    The Dragonfly badge as seen at DEFCON26

    134 parts21
  • 6 layers26 × 25 mmTektag, the printed circuit board in 3D

    Tektag

    teklabsdigital/TekTag

    Biosensor for telehealth, patient monitoring, fall detection, dementia geofencing and cardiograms

    93 parts18
  • 6 layers56.1 × 88 mmBldc&foc motor controller, the printed circuit board in 3D

    Bldc&foc motor controller

    bejaouihamza/bldc-foc-pcb

    This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.

    108 parts16
  • 6 layers50 × 85 mmRusty tracker, the printed circuit board in 3D

    Rusty tracker

    korken89/rusty-tracker

    There are 2 versions of the board, based on:

    181 parts14
  • 6 layers90 × 90 mmCodex micro wired revA route nognd, the printed circuit board in 3D

    Codex micro wired revA route nognd

    slopus/codex-keybored

    A 100% vibe-coded hardware build: Fusion 360, six-layer KiCad PCB, STM32 firmware, and live JLC factory handoff.

    97 parts10
  • 6 layers172 × 100 mmTestrack carrier, the printed circuit board in 3D

    Testrack carrier

    esden/redcuttle

    Moved to Codeberg

    117 parts9
  • 6 layers87.6 × 53.9 mmTeensy 4.1 attempt 1, the printed circuit board in 3D

    Teensy 4.1 attempt 1

    Wierdwizard2587/Custom-Teensy-4.1-PCB-Design

    Custom Designed MCU design based upon Teensy 4.1

    92 parts9
  • 6 layers128 × 91 mmMythra hub, the printed circuit board in 3D

    Mythra hub

    bad-alloc-heavy-industries/Mythra

    259 parts7BSD-3-Clause
  • 6 layers260.1 × 92.9 mmWafer keyboard v3, the printed circuit board in 3D

    Wafer keyboard v3

    oleksandrmaslov/wafer-zmk-config

    Wafer is the custom, ultra-thin mechanical keyboard built on nrf52840, with full NPM1300 integration and (custom spring) PG1316s switches.

    150 parts7
  • 8 layers82.6 × 55.2 mmPmc, the printed circuit board in 3D

    Pmc

    rombrew/phobia-pcb

    Phobia PCB design files

    165 parts7
  • 6 layers54.1 × 45.1 mmUSB PD, the printed circuit board in 3D

    USB PD

    Cuprum77/PD2Breadboard

    RP2040 USB PD negotiator with onboard power measuring capabilities and advanced software for power monitoring and optimization.

    94 parts5
  • 6 layers50 × 81.3 mmBRS HW v1, the printed circuit board in 3D

    BRS HW v1

    lucasnoce/BRS_v1

    Basic Rocket System

    129 parts3MIT
  • 6 layers15.2 × 34 mmPlajtime main, the printed circuit board in 3D

    Plajtime main

    Plajta/PlajTime-Hardware

    Here lays the current and past HW designs of our PlajTime smartwatch. That includes all the boards and the chassis.

    85 parts3CC-BY-SA-4.0
  • 8 layers80 × 80 mmQsbc, the printed circuit board in 3D

    Qsbc

    qfreiman/qsbc

    Single Board Computer based on the i.MX8M Mini

    481 parts3GPL-3.0
  • 6 layers158 × 158 mmFpv drone, the printed circuit board in 3D

    Fpv drone

    zeodotdev/zeo-boards

    ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.

    158 parts3
  • 6 layers170 × 172.2 mmEsc rev b, the printed circuit board in 3D

    Esc rev b

    iamdarshg/drone-arm

    Reworked cheaper, maybe faster but less redundant drone controller.

    681 parts2

Parts matching “SWD”

See them in the parts library