
Start module
yrgohenhal/start_module
Start module used in Robot-SM. New design in KiCad 10 based on https://github.com/p1rse/robot-sumo-start-module/

The Dragonfly badge as seen at DEFCON26
Sympetrum V3 FF3 is an open-source printed circuit board by borgel, from the borgel/sympetrum-v3 repository on GitHub. It is a 6-layer board of 98.6 × 88 mm with 134 parts on 78 nets, routed with 2,919 tracks and 252 vias.
It is built around the STM32F051K8U6, ALS-PT19-315C/L177/TR8 and TSOP75338WTT, with the DMP3099L-7-ES, IR25-21C/TR8 and JS102011SAQN among its other parts. Its parts include 51 diodes, 29 connectors, 18 resistors, 14 capacitors and 6 transistors. It belongs with the STM32 boards of this library.
An electronic conference badge, of course! (That makes this a wearable right?)
If you're interested in keeping up to date with new versions, you can add your email here: https://goo.gl/forms/xGFPdRpdT4x1kmzG3 I'll send out (few) updates as I make progress towards whatever the next version is.
By default the device does pleasant RGB fades across its 48 RGB LEDs. It also sends a beacon in infrared every 30 seconds. They use any beacons received to synchronize a clock from which an animation is derived. The effect is that if one is alone, it plays random colors. If a group of them are together, they play the same rainbow water drop animation together.
For a little more information, last year's was written up by Hackaday here.
This is a partial rewrite of the work done for DEFCON 25 (here).
If you haven't read Neal Stephenson's The Diamond Age: or, A Young Lady's Illustrated Primer, do that first. I'll wait.
If you have, there's a sequence around page 300 in which Miranda is first introduced to the possibility of using the drummers to find Nell. In this scene she attends a party in which the revellers wear colorful cloisonné dragonfly pins. As the party progresses they transition from random colorful flickering to some sort of synchrony, and Miranda notices the participants do the same. This is what I built.
A Sympetrum is a genus of Dragonfly.
Assembly instructions here: https://docs.google.com/document/d/1MZ-Gf56ivJ_pZaOBdA2XsJtWuKzQMPqqDXrGzq-pdRY/edit?usp=sharing
| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | SX-3528-RGB-ANODE | Borgel Custom:SX-3528-RGB-REORDERED-HiddenSilk | D301, D302, D303, D304, D305, D306, D307, D308, D309, D310, D311, D312, D401, D402, D403, D404 +32 |
| 5 | 10k | Resistors_SMD:R_0805_HandSoldering | R106, R301, R401, R501, R601 |
| 5 | DMP3099L-7 | TO_SOT_Packages_SMD:SOT-23 | Q102, Q301, Q401, Q501, Q601 |
| 4 | 0R | Resistors_SMD:R_1206_HandSoldering | R202, R203, R204, R205 |
| 4 | 22uF | Capacitors_SMD:C_0805_HandSoldering | C203, C204, C205, C206 |
| 4 | EN | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J302, J402, J502, J602 |
| 4 | GND | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J701, J702, J703, J708 |
| 4 | PWR | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J301, J401, J501, J601 |
| 3 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C101, C102, C103 |
| 3 | 3v3 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J704, J705, J706 |
| 3 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C104, C701, C702 |
| 2 | 1.02M | Resistors_SMD:R_0805_HandSoldering | R703, R704 |
| 2 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C105, C201 |
| 2 | 4.7k | Resistors_SMD:R_0805_HandSoldering | R101, R103 |
| 2 | C&K-PTS645SM43SMTR92-LFS | Borgel Custom:PTS645_SMT | SW101, SW102 |
| 2 | GS2 | Connectors:GS2 | J111, J112 |
| 2 | Hole-4mm-NPTH | Borgel Custom:Hole-4mm-NPTH | H101, H102 |
| 2 | IR25-21C/TR8 | Borgel Custom:LED_1206_SmallSilk | D102, D103 |
| 2 | VBatt | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J709, J711 |
| 1 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C202 |
| 1 | 0R-DNP | Resistors_SMD:R_0805_HandSoldering | R104 |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C106 |
| 1 | 2x2-Shitty | Borgel Custom:2x2_shitty | J110 |
| 1 | 3k | Resistors_SMD:R_0805_HandSoldering | R102 |
| 1 | 4.7uH | Inductors:Inductor_Taiyo-Yuden_MD-3030 | L701 |
| 1 | 47R | Resistors_SMD:R_0805_HandSoldering | R105 |
| 1 | 5.6k | Resistors_SMD:R_0805_HandSoldering | R201 |
| 1 | 536K | Resistors_SMD:R_0805_HandSoldering | R705 |
| 1 | A15 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J105 |
| 1 | A5 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J104 |
| 1 | AAT1217-1.2 | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U701 |
| 1 | ALS-PT19-315C/L177/TR8 | Borgel Custom:LED_0603_SmallSilk | Q101 |
| 1 | B8 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J102 |
| 1 | CAT24C512WI-GT3-DNP | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U102 |
| 1 | CONN_SWD | Pin_Headers:Pin_Header_Straight_1x04 | J108 |
| 1 | CONN_UART | Pin_Headers:Pin_Header_Straight_1x03 | J101 |
| 1 | GS2 | Borgel Custom:SOLDER-JUMPER_1-WAY-SM-CLOSED | J114 |
| 1 | GS2 | Borgel Custom:SOLDER-JUMPER_1-WAY-SM | J710 |
| 1 | IS31FL3236 | Borgel Custom:QFN-44-5x5_Pitch0.4mm-Narrow | U201 |
| 1 | JS102011SAQN | Borgel Custom:CK-JS102011SAQN_sm-spdt-switch | SW701 |
| 1 | Keystone_2462 | Borgel Custom:Keystone_2462 | B701 |
| 1 | LOGO | Borgel Custom:PCBWay | G*** |
| 1 | LOGO | Borgel Custom:BTG Logo 0.25in | G*** |
| 1 | LOGO | Borgel Custom:SYM3-Art | G*** |
| 1 | STM32F051K8U6 | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U101 |
| 1 | TP_SCL | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | J109 |
| 1 | TP_SDA | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | J107 |
| 1 | TSOP75338WTT | Borgel Custom:TSOP753W | U103 |
| 1 | USR_LED-DNP | Borgel Custom:LED_0603_SmallSilk | D101 |
The 133 most common of 134 parts.

yrgohenhal/start_module
Start module used in Robot-SM. New design in KiCad 10 based on https://github.com/p1rse/robot-sumo-start-module/

0BAB1/HOLY_ESC
An open-source closed loop ESC PCB / Hardware platform. Based on a STM32F051 (Cortex M0 based) MCU. Tested using AM32 ESC software.

WRansohoff/STEAMGal_Tetris
Try writing some 'tetris' firmware for a development board with a very small display, a buzzer, and a few buttons. That should introduce a few core peripherals.

aws-samples/aws-iot-connected-product-demo-badge
This device was designed and created for a hands-on workshop at re:Invent 2023.

aws/iot-expresslink
This device was designed and created for the AWS IoT ExpressLink Demo Badge Workshop, which was run at re:Invent 2022.



It measures 98.6 × 88 mm and has 6 copper layers, 1.6 mm thick.
134 parts, built around the STM32F051K8U6, ALS-PT19-315C/L177/TR8, TSOP75338WTT and DMP3099L-7-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the borgel/sympetrum-v3 repository on GitHub, at the commit this page was made from: the board is Hardware/Badge/Sympetrum-V3 FF3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask borgel before reusing the design.