

Panel
A smart, WiFi-enabled ESP32 soil moisture and plant sensor
- Size
- 70 × 116 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 174
- Nets
- 114
- Pads
- 444
- Tracks, vias
- 620, 108
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jun 2022
- Updated
- 11 Apr 2026
Overview
Panel is an open-source printed circuit board by Dennis960, from the Dennis960/Blumy repository on GitHub. It is a 4-layer board of 70 × 116 mm with 174 parts on 114 nets, routed with 620 tracks and 108 vias.
It is built around the ESP32-C6-MINI-1-N4, AHT20 and ALS-PT19-315C/L177/TR8, with the TPS63036YFGR, TS-1088-AR02016 and MK-12C02-G025 among its other parts. Its parts include 28 resistors, 24 capacitors, 16 ICs, 6 diodes and 2 connectors. It belongs with the radio and wireless boards and the ESP32, RISC-V and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
12ESP32-C6-MINI-1-N4
SMD-53P-106dBm -40℃~+85℃ 2.4GHz 21dBm 354mA 3V~3.6V 71mA ESP32-C6FH4 Integrated Bluetooth function、Integrated Zigbee function On-board PCB Antenna UART、SPI、I2C、GPIO、I2S SMD-53P WiFi Modules ROHSEspressif SystemsWiFi ModulesAHT20
SMD-40℃~+120℃ 0%RH~100%RH 2.2V~5.5V 20bit 570uA I2C ±0.3℃ ±2%RH SMD Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity SensorALS-PT19-315C/L177/TR8
0603-40℃~+85℃ 0.6mm 0.8mm 1.7mm 2.5V~5.5V Light Intensity Spectral correction/filtering 0603 Ambient Light Sensors ROHSEverlight ElectronicsAmbient Light SensorsTPS63036YFGR
DSBGA-8-40℃~+85℃@(TA) 1 1.2V~5.5V 1.8V~5.5V 1A 2MHz 35uA Adjustable Buck-Boost Buck-Boost Built-in Yes DSBGA-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesMK-12C02-G025
SMD,6.6x1.4mm1.4mm 300mA 5.2mm 5V 6.6mm Black Rectangular Columnar SPDT Surface Mount, Right Angle SMD,6.6x1.4mm Slide Switches ROHSG-SwitchSlide SwitchesHC-TYPE-C-16P-01A-G
SMD-25℃~+85℃ 1 10,000 cycles 16P 3A Female Green Surface Mount, Right Angle Type-C USB 3.1 SMD USB Connectors ROHSHCTLUSB ConnectorsCL05A106MQ5NUN
040210uF 6.3V X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0402WGF5101
0402-55℃~+155℃ 5.1kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0402WGF1002
0402-55℃~+155℃ 10kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountCL05B104KO5NNN
0402100nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL05B103KB5NNN
040210nF 50V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
Panel/README.mdBlumy Panel
To create the panel, open the root of this repository in the panel devcontainer.
Then: from the root run python3 Panel/panel.py.
Parts
174| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_10_5, KiKit_MB_10_6, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_11_5, KiKit_MB_11_6, KiKit_MB_12_1, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4 +60 |
| 12 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C1, C6, C6, C7, C7, C9, C9, C10, C10, C12, C12 |
| 10 | 5k1 | Resistor_SMD:R_0402_1005Metric | R2, R2, R4, R4, R10, R10, R11, R11, R12, R12 |
| 8 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_B_4, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3, KiKit_FID_T_4 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R5, R8, R8, R9, R9 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H1, H2, H2, H3, H3 |
| 4 | 100nF-Ceramic | Capacitor_SMD:C_0402_1005Metric | C5, C5, C11, C11 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C3, C3, C8, C8 |
| 4 | 120 | Resistor_SMD:R_0402_1005Metric | R13, R13, R14, R14 |
| 4 | Tactile-Switch | CustomFootprints:SW-SMD_L3.9-W3.0-P4.45 | U4, U4, U7, U7 |
| 2 | 1.5uH | CustomFootprints:L0806 | L1, L1 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R3, R3 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C2, C2 |
| 2 | 287k | Resistor_SMD:R_0402_1005Metric | R1, R1 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R6, R6 |
| 2 | 51.1k | Resistor_SMD:R_0402_1005Metric | R15, R15 |
| 2 | 7pF-27pF, A=2.75cm^2 | CustomFootprints:Sensor-Tip | C4, C4 |
| 2 | AHT20 | CustomFootprints:SENSOR-SMD-6_AHT20 | U3, U3 |
| 2 | Battery-Spring | CustomFootprints:AAA Battery-spring | U9, U9 |
| 2 | Buzzer | CustomFootprints:BUZ-SMD_4P-L8.5-W8.5-P8.50-BR | BZ1, BZ1 |
| 2 | Conn_01x03 | CustomFootprints:PinHeader_1x03_P2.54mm_Vertical_SMD | J1, J1 |
| 2 | ESP32-C6-MINI-1-N4 | CustomFootprints:WIFIM-SMD_61P-L16.6-W13.2-P0.80-ESP32-C6-MINI-1-N4 | U13, U13 |
| 2 | Flower | CustomFootprints:Flower | Flower1, Flower1 |
| 2 | GREEN | CustomFootprints:LED0805-R-RD | D1, D1 |
| 2 | Light sensor | CustomFootprints:SENSORS-SMD_ALS-PT19 | U6, U6 |
| 2 | RED | CustomFootprints:LED0805-R-RD | D3, D3 |
| 2 | Slide-Switch | CustomFootprints:SW-SMD_MK-12C02-G025 | U8, U8 |
| 2 | Switching-Diode | CustomFootprints:SOD-123F_L2.7-W1.6-LS3.8-RD | D2, D2 |
| 2 | TPS63036YFGR | CustomFootprints:DSBGA-8_L1.8-W1.1-R2-C4-P0.40-BR | REF1, REF1 |
| 2 | USB-C | CustomFootprints:USB-C-SMD_G-SWITCH_GT-USB-7010EN | U1, U1 |
More from Dennis960/Blumy
4- 4 layers24 × 116 mm

- 4 layers24 × 116 mm

- 2 layers22 × 127 mm

- 2 layers24.4 × 190.2 mm

Similar boards
- 4 layers50 × 50 mm

STMF103C8T6 Dev Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
52 parts915 - 4 layers42 × 65 mm

Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT - 4 layers76 × 76.9 mm

- 6 layers34.4 × 20 mm

GigaControl
kaminaris/GigaESC-ControlBoard
Compact six-layer control card for modular GigaESC motor controllers. The MCU, CAN transceiver, IMU and signal conditioning live here; the MOSFET power stage and power supply are separate boards.
54 parts - 4 layers60 × 75 mm

Mixed Signal Demo PCB
rcardenes/FEDEVEL-Mixed-Signal-PCB
KiCAD files for the Mixed-Signal Hardware Design course at Fedevel, by Phil Salmony
114 parts2 - 4 layers50 × 20 mm

GigaPower200V
kaminaris/GigaESC-Power200V
Compact 50 × 20 mm non-isolated power-supply module for the modular GigaESC platform, intended for the 200 V version. Provides 12 V, 5 V and 3.3 V rails through a separate output connector.
70 parts - 2 layers40 × 30.5 mm

- 2 layers34.6 × 38.5 mm

Questions
How big is the Panel PCB?
It measures 70 × 116 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Panel use?
174 parts, built around the ESP32-C6-MINI-1-N4, AHT20, ALS-PT19-315C/L177/TR8 and TPS63036YFGR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the Dennis960/Blumy repository on GitHub, at the commit this page was made from: the board is Panel/panel.kicad_pcb and its schematic Board/Aconitum/Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dennis960 before reusing the design.