
STM32F051K8U6
STMicroelectronicsExtended
-40℃~+85℃ 12bit 12bit 27 2V~3.6V 32 Bit 48MHz 64KB 8KB ARM Cortex-M0 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32F051K8U6
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- UFQFPN-32(5x5)
- Pins
- 33
- In stock
- 3,097 at JLCPCB (C72339)
- Used on
- 3 open-source boards
Overview
The STM32F051K8U6 is a microcontroller made by STMicroelectronics in a UFQFPN-32(5x5) package with 33 pins. -40℃~+85℃ 12bit 12bit 27 2V~3.6V 32 Bit 48MHz 64KB 8KB ARM Cortex-M0 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F051K8Ux, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, from KiCad's library), ready for a KiCad board. 3,097 are in stock at JLCPCB (part C72339). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
19- Supply, least
- 2 V · VDD, recommended operating min · p. 47
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 47
- Supply, least
- 2.4 V · VDDA, ADC and DAC used, recommended operating min · p. 47
- Supply, absolute maximum
- 4 V · VDD, absolute max · p. 45
- Works from
- -40 °C · Ambient, suffix 6, maximum power dissipation min · p. 47
- Works up to
- 85 °C · Ambient, suffix 6, maximum power dissipation max · p. 47
- Works up to
- 105 °C · Ambient, suffix 6, low power dissipation max · p. 47
- Junction, hottest
- 150 °C · Junction, absolute max · p. 46
- Junction, hottest
- 105 °C · Junction, suffix 6 operating max · p. 47
- Takes working
- 22.16 mA · Sum of VDD and VDDA, typical Run from Flash, 48 MHz HSE bypass PLL on, all peripherals enabled, 3.6 V · p. 50
- Takes at most
- 24.68 mA · Sum of VDD and VDDA, max Run from RAM, 48 MHz HSI PLL on, all peripherals enabled, 3.6 V, 105 °C · p. 50
- Takes asleep
- 2.5 µA · Sum of VDD and VDDA, typical Standby, LSI and IWDG off, VDDA monitoring on, 2.0 V · p. 52
- A pin gives at most
- 25 mA · Per I/O and control pin sink, absolute max · p. 46
- Junction to air (UFQFPN32)
- 38 K/W · Junction to ambient, stated value · p. 112
- Supply, least
- 1.65 V · VBAT, recommended operating min · p. 47
- Takes working
- 23.35 mA · sum of IDD and IDDA, typical Run at 48 MHz, peripherals enabled, VDD = VDDA = 3.3 V · p. 54
- Takes asleep
- 3.4 µA · sum of IDD and IDDA, typical Standby, LSI and IWDG OFF, VDDA monitoring ON, VDD = VDDA = 3.3 V · p. 52
- A pin gives at most
- 20 mA · GPIO source or sink max with relaxed VOL/VOH · p. 73
- Junction to air (UFQFPN32 - 5 × 5 mm)
- 38 K/W · junction-to-ambient thermal resistance · p. 112
What it is and has
14- Core
- ARM 32-bit Cortex-M0 CPU · p. 1
- Maximum CPU frequency
- 48 MHz · p. 1
- SRAM
- 8 Kbytes with HW parity checking · p. 1
- CRC
- CRC calculation unit · p. 1
- DMA
- 5-channel controller · p. 1
- DAC
- One 12-bit channel · p. 1
- Unique ID
- 96-bit · p. 1
- Debug
- Serial wire debug (SWD) · p. 1
- Low power modes
- Sleep, Stop, Standby · p. 1
- Package
- UFQFPN32, 5 × 5 mm · p. 112
- Core clock
- up to 48 MHz · p. 1
- Package
- UFQFPN32 5x5 mm · p. 1
- Core
- ARM® 32-bit Cortex®-M0 CPU · p. 1
- ADC resolution
- 12-bit · p. 76
Specifications
688| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDD–VSS | min -0.3 · max 4 V | 45 | |
| External analog supply voltage VDDA–VSS | min -0.3 · max 4 V | 45 | |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | max 0.4 V | 45 | |
| External backup supply voltage VBAT–VSS | min -0.3 · max 4 V | 45 | |
| Input voltage on TTa pins VIN | Minimum VSS - 0.3 V | max 4 V | 45 |
| BOOT0 VIN | min 0 · max 9 V | 45 | |
| Input voltage on any other pin VIN | Minimum VSS - 0.3 V | max 4 V | 45 |
| Variations between different VDD power pins |∆VDDx| | max 50 mV | 45 | |
| Variations between all the different ground pins |VSSx - VSS| | max 50 mV | 45 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | max 120 mA | 46 | |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | max -120 mA | 46 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 46 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max -100 mA | 46 | |
| Output current sunk by any I/O and control pin IIO(PIN) | max 25 mA | 46 | |
| Output current source by any I/O and control pin IIO(PIN) | max -25 mA | 46 | |
| Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) | max 80 mA | 46 | |
| Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) | max -80 mA | 46 | |
| Injected current on B, FT and FTf pins IINJ(PIN) | Negative injection | max -5 mA | 46 |
| Injected current on B, FT and FTf pins IINJ(PIN) | Positive injection | max 0 mA | 46 |
| Injected current on TC and RST pin IINJ(PIN) | Magnitude, ±5 | max 5 mA | 46 |
| Injected current on TTa pins IINJ(PIN) | Magnitude, ±5 | max 5 mA | 46 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Magnitude, ±25 | max 25 mA | 46 |
| Storage temperature range TSTG | min -65 · max 150 °C | 46 | |
| Maximum junction temperature TJ | max 150 °C | 46 | |
| Internal AHB clock frequency fHCLK | min 0 · max 48 MHz | 47 | |
| Internal APB clock frequency fPCLK | min 0 · max 48 MHz | 47 | |
| Standard operating voltage VDD | min 2 · max 3.6 V | 47 | |
| Analog operating voltage (ADC and DAC not used) VDDA | Must have a potential equal to or higher than VDD; minimum VDD | max 3.6 V | 47 |
| Analog operating voltage (ADC and DAC used) VDDA | Must have a potential equal to or higher than VDD | min 2.4 · max 3.6 V | 47 |
| I/O input voltage VIN | TC and RST I/O; maximum VDDIOx+0.3 | min -0.3 V | 47 |
| I/O input voltage VIN | TTa I/O; maximum VDDA+0.3 | min -0.3 V | 47 |
| I/O input voltage VIN | FT and FTf I/O | min -0.3 · max 5.5 V | 47 |
| I/O input voltage VIN | BOOT0 | min 0 · max 5.5 V | 47 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | UFQFPN32; suffix 6, TA = 85 °C | max 526 mW | 47 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 47 |
| Ambient temperature for the suffix 6 version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 47 |
| Junction temperature range TJ | Suffix 6 version | min -40 · max 105 °C | 47 |
| VDD rise time rate tVDD | Maximum ∞ | min 0 us/V | 48 |
| VDD fall time rate tVDD | Maximum ∞ | min 20 us/V | 48 |
| VDDA rise time rate tVDDA | Maximum ∞ | min 0 us/V | 48 |
| VDDA fall time rate tVDDA | Maximum ∞ | min 20 us/V | 48 |
| Power on/power down reset threshold VPOR/PDR | Falling edge | min 1.8 · typ 1.88 · max 1.96 V | 48 |
| Power on/power down reset threshold VPOR/PDR | Rising edge | min 1.84 · typ 1.92 · max 2 V | 48 |
| PDR hysteresis VPDRhyst | typ 40 mV | 48 | |
| Reset temporization tRSTTEMPO | min 1.5 · typ 2.5 · max 4.5 ms | 48 | |
| PVD threshold 0 VPVD0 | Rising edge | min 2.1 · typ 2.18 · max 2.26 V | 48 |
| PVD threshold 0 VPVD0 | Falling edge | min 2 · typ 2.08 · max 2.16 V | 48 |
| PVD threshold 1 VPVD1 | Rising edge | min 2.19 · typ 2.28 · max 2.37 V | 48 |
| PVD threshold 1 VPVD1 | Falling edge | min 2.09 · typ 2.18 · max 2.27 V | 48 |
| PVD threshold 2 VPVD2 | Rising edge | min 2.28 · typ 2.38 · max 2.48 V | 48 |
| PVD threshold 2 VPVD2 | Falling edge | min 2.18 · typ 2.28 · max 2.38 V | 48 |
| PVD threshold 3 VPVD3 | Rising edge | min 2.38 · typ 2.48 · max 2.58 V | 48 |
| PVD threshold 3 VPVD3 | Falling edge | min 2.28 · typ 2.38 · max 2.48 V | 48 |
| PVD threshold 4 VPVD4 | Rising edge | min 2.47 · typ 2.58 · max 2.69 V | 48 |
| PVD threshold 4 VPVD4 | Falling edge | min 2.37 · typ 2.48 · max 2.59 V | 48 |
| PVD threshold 5 VPVD5 | Rising edge | min 2.57 · typ 2.68 · max 2.79 V | 48 |
| PVD threshold 5 VPVD5 | Falling edge | min 2.47 · typ 2.58 · max 2.69 V | 48 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 22 · max 22.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 23.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 11.8 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 13.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 15 · max 15.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 7.6 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 105 °C | max 9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 12.2 · max 13.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 7.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 105 °C | max 8.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 4.4 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 5.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 2.7 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 105 °C | max 3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 1 · max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 105 °C | max 1.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at 25 °C, 85 °C and 105 °C | typ 0.7 · max 0.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 22 · max 22.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 23.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 11.8 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 13.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 15 · max 15.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 7.6 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 105 °C | max 9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 12.2 · max 13.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 7.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 105 °C | max 8.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 4.4 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 5.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 2.7 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 105 °C | max 3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 22.2 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 24.4 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 12 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 13.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 15.4 · max 16.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 16.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 7.8 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 105 °C | max 9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 11.2 · max 12.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 12.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 6.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 105 °C | max 8.1 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 4 · max 4.5 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 4.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 1.9 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 105 °C | max 3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 0.6 · max 0.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 105 °C | max 0.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 0.3 · max 0.6 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at 105 °C | max 0.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 22.2 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 24.4 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 12 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 13.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 15.4 · max 16.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 16.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 7.8 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 105 °C | max 9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 11.2 · max 12.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 12.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 6.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 105 °C | max 8.1 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 4 · max 4.5 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 4.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 1.9 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 105 °C | max 3 mA | 50 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 14 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 2.8 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 9.5 · max 10.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 105 °C | max 2.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 7.3 · max 7.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 8.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 25 °C and 85 °C | typ 1.5 · max 1.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 105 °C | max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 2.6 · max 2.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 25 °C, 85 °C and 105 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 25 °C, 85 °C and 105 °C | typ 0.4 · max 0.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at 25 °C, 85 °C and 105 °C | typ 0.2 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 14 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 25 °C | typ 3.8 · max 4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 85 °C | max 4.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 4.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 9.5 · max 10.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 25 °C | typ 2.6 · max 2.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 85 °C and 105 °C | max 2.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 7.3 · max 7.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 8.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 25 °C, 85 °C and 105 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 25 °C and 85 °C | typ 2.6 · max 2.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 25 °C, 85 °C and 105 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 150 · max 170 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 85 °C | max 178 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 105 °C | max 182 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 164 · max 183 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 85 °C | max 195 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 105 °C | max 198 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 25 °C | typ 104 · max 121 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 85 °C | max 126 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 105 °C | max 128 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 25 °C | typ 113 · max 129 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 85 °C | max 135 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 105 °C | max 138 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 25 °C | typ 82 · max 96 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 85 °C | max 100 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 105 °C | max 103 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 25 °C | typ 88 · max 102 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 85 °C | max 106 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 105 °C | max 108 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 25 °C | typ 2 · max 2.7 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 85 °C | max 3.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 105 °C | max 3.3 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 25 °C | typ 3.5 · max 3.8 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 85 °C | max 4.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 105 °C | max 4.4 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 25 °C | typ 2 · max 2.7 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 85 °C | max 3.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 105 °C | max 3.3 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 25 °C | typ 3.5 · max 3.8 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 85 °C | max 4.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 105 °C | max 4.4 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 220 · max 240 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 85 °C | max 248 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 105 °C | max 252 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 244 · max 263 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 85 °C | max 275 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 105 °C | max 278 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 25 °C | typ 174 · max 191 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 85 °C | max 196 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 105 °C | max 198 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 25 °C | typ 193 · max 209 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 85 °C | max 215 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 105 °C | max 218 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 25 °C | typ 152 · max 167 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 85 °C | max 173 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 105 °C | max 174 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 25 °C | typ 168 · max 183 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 85 °C | max 190 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 105 °C | max 192 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 25 °C | typ 72 · max 79 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 85 °C | max 82 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 105 °C | max 83 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 25 °C | typ 83.5 · max 91 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 85 °C | max 94 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 105 °C | max 95 uA | 51 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 15 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 15.1 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 15.3 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 15.5 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 15.7 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 16 uA | 52 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 3.2 uA | 52 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 3.3 uA | 52 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 3.4 uA | 52 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 3.5 uA | 52 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 3.7 uA | 52 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 4 uA | 52 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 0.8 uA | 52 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1 uA | 52 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.1 uA | 52 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.2 uA | 52 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.4 uA | 52 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 1.5 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 0.7 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 0.8 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 0.9 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.1 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.3 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; max at 25 °C | max 2 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; max at 85 °C | max 2.5 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; max at 105 °C | max 3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.6 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; max at 25 °C and 85 °C | max 3.5 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; max at 105 °C | max 4.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.3 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.7 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2.9 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.3 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.8 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.9 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.3 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; max at 25 °C and 85 °C | max 3.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; max at 105 °C | max 4.5 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.6 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.7 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.8 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.9 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.2 uA | 52 |
| Thermal resistance junction-ambient ΘJA | UFQFPN32 - 5 × 5 mm; value column | typ 38 °C/W | 112 |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | VDD > VDDA | max 0.4 V | 45 |
| Input voltage on TTa pins VIN | Min VSS - 0.3 V | max 4 V | 45 |
| Input voltage on any other pin VIN | Min VSS - 0.3 V | max 4 V | 45 |
| Injected current on TC and RST pin IINJ(PIN) | Max. column states ±5 | max 5 mA | 46 |
| Injected current on TTa pins IINJ(PIN) | Max. column states ±5 | max 5 mA | 46 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Max. column states ±25; absolute sum of positive and negative injected currents | max 25 mA | 46 |
| Analog operating voltage (ADC and DAC not used) VDDA | Min VDD; must have a potential equal to or higher than VDD | max 3.6 V | 47 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 47 | |
| I/O input voltage VIN | TC and RST I/O; max VDDIOx+0.3 V | min -0.3 V | 47 |
| I/O input voltage VIN | TTa I/O; max VDDA+0.3 V; disable internal pull-up above VDDIOx+0.3 V | min -0.3 V | 47 |
| I/O input voltage VIN | FT and FTf I/O; disable internal pull-up above VDDIOx+0.3 V | min -0.3 · max 5.5 V | 47 |
| PVD threshold 6 VPVD6 | Rising edge | min 2.66 · typ 2.78 · max 2.9 V | 49 |
| PVD threshold 6 VPVD6 | Falling edge | min 2.56 · typ 2.68 · max 2.8 V | 49 |
| PVD threshold 7 VPVD7 | Rising edge | min 2.76 · typ 2.88 · max 3 V | 49 |
| PVD threshold 7 VPVD7 | Falling edge | min 2.66 · typ 2.78 · max 2.9 V | 49 |
| PVD hysteresis VPVDhyst | Guaranteed by design, not tested in production | typ 100 mV | 49 |
| PVD current consumption IDD(PVD) | Maximum guaranteed by design, not tested in production | typ 0.15 · max 0.26 uA | 49 |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.2 · typ 1.23 · max 1.25 V | 49 |
| ADC_IN17 buffer startup time tSTART | Guaranteed by design, not tested in production | max 10 us | 49 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design, not tested in production | min 4 us | 49 |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDDA = 3 V; guaranteed by design, not tested in production | max 10 mV | 49 |
| Temperature coefficient TCoeff | Guaranteed by design, not tested in production | min -100 · max 100 ppm/°C | 49 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 22 · max 22.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | typ 22 · max 23.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 11.8 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | typ 11.8 · max 13.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 15 · max 15.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | typ 15 · max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 7.6 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | typ 7.6 · max 9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 12.2 · max 13.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | typ 12.2 · max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 7.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | typ 7.2 · max 8.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 4.4 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | typ 4.4 · max 5.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 2.7 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | typ 2.7 · max 3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 1 · max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 105 °C | typ 1 · max 1.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 25 °C, 85 °C or 105 °C | typ 0.7 · max 0.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 22 · max 22.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | typ 22 · max 23.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 11.8 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | typ 11.8 · max 13.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 15 · max 15.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | typ 15 · max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 7.6 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | typ 7.6 · max 9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 12.2 · max 13.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | typ 12.2 · max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 7.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | typ 7.2 · max 8.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 4.4 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | typ 4.4 · max 5.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 2.7 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | typ 2.7 · max 3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 22.2 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | typ 22.2 · max 24.4 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 12 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | typ 12 · max 13.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 15.4 · max 16.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | typ 15.4 · max 16.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 7.8 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | typ 7.8 · max 9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 11.2 · max 12.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | typ 11.2 · max 12.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 6.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | typ 6.2 · max 8.1 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 4 · max 4.5 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | typ 4 · max 4.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 1.9 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | typ 1.9 · max 3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 0.6 · max 0.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 105 °C | typ 0.6 · max 0.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 0.3 · max 0.6 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 105 °C | typ 0.3 · max 0.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 22.2 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | typ 22.2 · max 24.4 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 12 · max 12.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | typ 12 · max 13.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 15.4 · max 16.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | typ 15.4 · max 16.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 7.8 · max 8.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | typ 7.8 · max 9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 11.2 · max 12.2 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | typ 11.2 · max 12.8 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 6.2 · max 7.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | typ 6.2 · max 8.1 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 4 · max 4.5 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | typ 4 · max 4.7 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 1.9 · max 2.9 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | typ 1.9 · max 3 mA | 50 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 14 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | typ 14 · max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 2.8 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | typ 2.8 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 9.5 · max 10.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | typ 9.5 · max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | typ 2 · max 2.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 7.3 · max 7.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | typ 7.3 · max 8.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 25 °C or 85 °C | typ 1.5 · max 1.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | typ 1.5 · max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 2.6 · max 2.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | typ 2.6 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 25 °C, 85 °C or 105 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 25 °C, 85 °C or 105 °C | typ 0.4 · max 0.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 25 °C, 85 °C or 105 °C | typ 0.2 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 14 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | typ 14 · max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 25 °C | typ 3.8 · max 4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 85 °C | typ 3.8 · max 4.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | typ 3.8 · max 4.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 9.5 · max 10.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | typ 9.5 · max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 25 °C | typ 2.6 · max 2.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 85 °C or 105 °C | typ 2.6 · max 2.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 7.3 · max 7.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | typ 7.3 · max 8.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 25 °C, 85 °C or 105 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 25 °C or 85 °C | typ 2.6 · max 2.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | typ 2.6 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 25 °C, 85 °C or 105 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 48 MHz; TA = 25 °C | typ 150 · max 170 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 48 MHz; TA = 85 °C | typ 150 · max 178 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 48 MHz; TA = 105 °C | typ 150 · max 182 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 48 MHz; TA = 25 °C | typ 164 · max 183 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 48 MHz; TA = 85 °C | typ 164 · max 195 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 48 MHz; TA = 105 °C | typ 164 · max 198 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 32 MHz; TA = 25 °C | typ 104 · max 121 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 32 MHz; TA = 85 °C | typ 104 · max 126 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 32 MHz; TA = 105 °C | typ 104 · max 128 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 32 MHz; TA = 25 °C | typ 113 · max 129 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 32 MHz; TA = 85 °C | typ 113 · max 135 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 32 MHz; TA = 105 °C | typ 113 · max 138 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 24 MHz; TA = 25 °C | typ 82 · max 96 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 24 MHz; TA = 85 °C | typ 82 · max 100 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL on, 24 MHz; TA = 105 °C | typ 82 · max 103 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 24 MHz; TA = 25 °C | typ 88 · max 102 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 24 MHz; TA = 85 °C | typ 88 · max 106 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL on, 24 MHz; TA = 105 °C | typ 88 · max 108 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL off, 8 MHz; TA = 25 °C | typ 2 · max 2.7 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL off, 8 MHz; TA = 85 °C | typ 2 · max 3.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL off, 8 MHz; TA = 105 °C | typ 2 · max 3.3 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL off, 8 MHz; TA = 25 °C | typ 3.5 · max 3.8 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL off, 8 MHz; TA = 85 °C | typ 3.5 · max 4.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL off, 8 MHz; TA = 105 °C | typ 3.5 · max 4.4 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL off, 1 MHz; TA = 25 °C | typ 2 · max 2.7 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL off, 1 MHz; TA = 85 °C | typ 2 · max 3.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSE bypass, PLL off, 1 MHz; TA = 105 °C | typ 2 · max 3.3 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL off, 1 MHz; TA = 25 °C | typ 3.5 · max 3.8 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL off, 1 MHz; TA = 85 °C | typ 3.5 · max 4.1 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSE bypass, PLL off, 1 MHz; TA = 105 °C | typ 3.5 · max 4.4 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 48 MHz; TA = 25 °C | typ 220 · max 240 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 48 MHz; TA = 85 °C | typ 220 · max 248 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 48 MHz; TA = 105 °C | typ 220 · max 252 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 48 MHz; TA = 25 °C | typ 244 · max 263 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 48 MHz; TA = 85 °C | typ 244 · max 275 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 48 MHz; TA = 105 °C | typ 244 · max 278 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 32 MHz; TA = 25 °C | typ 174 · max 191 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 32 MHz; TA = 85 °C | typ 174 · max 196 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 32 MHz; TA = 105 °C | typ 174 · max 198 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 32 MHz; TA = 25 °C | typ 193 · max 209 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 32 MHz; TA = 85 °C | typ 193 · max 215 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 32 MHz; TA = 105 °C | typ 193 · max 218 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 24 MHz; TA = 25 °C | typ 152 · max 167 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 24 MHz; TA = 85 °C | typ 152 · max 173 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL on, 24 MHz; TA = 105 °C | typ 152 · max 174 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 24 MHz; TA = 25 °C | typ 168 · max 183 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 24 MHz; TA = 85 °C | typ 168 · max 190 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL on, 24 MHz; TA = 105 °C | typ 168 · max 192 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL off, 8 MHz; TA = 25 °C | typ 72 · max 79 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL off, 8 MHz; TA = 85 °C | typ 72 · max 82 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 2.4 V; HSI clock, PLL off, 8 MHz; TA = 105 °C | typ 72 · max 83 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL off, 8 MHz; TA = 25 °C | typ 83.5 · max 91 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL off, 8 MHz; TA = 85 °C | typ 83.5 · max 94 uA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | VDDA = 3.6 V; HSI clock, PLL off, 8 MHz; TA = 105 °C | typ 83.5 · max 95 uA | 51 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 25 °C | max 2 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 85 °C | max 2.5 uA | 52 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 105 °C | max 3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.6 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.3 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.7 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2.9 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.3 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.8 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.9 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.3 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °C | max 3.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °C | max 3.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °C | max 4.5 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.2 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.5 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.6 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.7 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.8 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.9 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.1 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.2 uA | 52 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.2 uA | 52 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.65 V | typ 0.5 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.8 V | typ 0.5 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.4 V | typ 0.6 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.7 V | typ 0.7 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.3 V | typ 0.8 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.6 V | typ 0.9 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 25 °C | max 1 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 85 °C | max 1.3 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 105 °C | max 1.7 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.65 V | typ 0.8 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.8 V | typ 0.8 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.4 V | typ 0.9 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.7 V | typ 1 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.3 V | typ 1.1 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.6 V | typ 1.2 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 25 °C | max 1.3 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 85 °C | max 1.6 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 105 °C | max 2.1 uA | 53 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 V | typ 23.2 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 V | typ 13.3 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 V | typ 13.2 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 48 MHz; VDD = VDDA = 3.3 V | typ 3.1 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 V | typ 17.6 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 V | typ 10.3 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 V | typ 10.1 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 36 MHz; VDD = VDDA = 3.3 V | typ 2.6 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 V | typ 15.6 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 V | typ 9.3 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 V | typ 9 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 32 MHz; VDD = VDDA = 3.3 V | typ 2.4 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 V | typ 12.1 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 V | typ 7.4 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 V | typ 7 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 24 MHz; VDD = VDDA = 3.3 V | typ 2 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 V | typ 8.4 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 V | typ 5.1 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 V | typ 5 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 16 MHz; VDD = VDDA = 3.3 V | typ 1.6 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 V | typ 4.5 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 V | typ 3 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 V | typ 2.8 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 8 MHz; VDD = VDDA = 3.3 V | typ 1.1 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 V | typ 2.8 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 V | typ 2 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 V | typ 2 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 4 MHz; VDD = VDDA = 3.3 V | typ 1.1 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 V | typ 1.9 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 V | typ 1.5 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 V | typ 1.5 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 2 MHz; VDD = VDDA = 3.3 V | typ 1 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 V | typ 1.5 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 V | typ 1.3 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 V | typ 1.3 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 1 MHz; VDD = VDDA = 3.3 V | typ 1 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals enabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 V | typ 1.2 mA | 54 |
| Current consumption from VDD supply IDD | Run mode; peripherals disabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 V | typ 1.2 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals enabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 V | typ 1.1 mA | 54 |
| Current consumption from VDD supply IDD | Sleep mode; peripherals disabled; fHCLK = 500 kHz; VDD = VDDA = 3.3 V | typ 1 mA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 48 MHz; VDD = VDDA = 3.3 V | typ 151 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 36 MHz; VDD = VDDA = 3.3 V | typ 113 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 32 MHz; VDD = VDDA = 3.3 V | typ 101 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 24 MHz; VDD = VDDA = 3.3 V | typ 79 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 16 MHz; VDD = VDDA = 3.3 V | typ 57 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 8 MHz; VDD = VDDA = 3.3 V | typ 2.2 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 4 MHz; VDD = VDDA = 3.3 V | typ 2.2 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 2 MHz; VDD = VDDA = 3.3 V | typ 2.2 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 1 MHz; VDD = VDDA = 3.3 V | typ 2.2 uA | 54 |
| Current consumption from VDDA supply IDDA | fHCLK = 500 kHz; VDD = VDDA = 3.3 V | typ 2.2 uA | 54 |
| BusMatrix | AHB; 25 °C | typ 5 uA/MHz | 57 |
| DMA1 | AHB; 25 °C | typ 7 uA/MHz | 57 |
| SRAM | AHB; 25 °C | typ 1 uA/MHz | 57 |
| Flash memory interface | AHB; 25 °C | typ 14 uA/MHz | 57 |
| CRC | AHB; 25 °C | typ 2 uA/MHz | 57 |
| GPIOA | AHB; 25 °C | typ 9 uA/MHz | 57 |
| GPIOB | AHB; 25 °C | typ 12 uA/MHz | 57 |
| GPIOC | AHB; 25 °C | typ 2 uA/MHz | 57 |
| GPIOD | AHB; 25 °C | typ 1 uA/MHz | 57 |
| GPIOF | AHB; 25 °C | typ 1 uA/MHz | 57 |
| TSC | AHB; 25 °C | typ 6 uA/MHz | 57 |
| All AHB peripherals | 25 °C | typ 55 uA/MHz | 57 |
| Oscillator frequency fOSC_IN | min 4 · typ 8 · max 32 MHz | 61 | |
| Feedback resistor RF | typ 200 kΩ | 61 | |
| HSE current consumption IDD | During startup | max 8.5 mA | 61 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 10 pF@8 MHz | typ 0.4 mA | 61 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 45 Ω, CL = 10 pF@8 MHz | typ 0.5 mA | 61 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 5 pF@32 MHz | typ 0.8 mA | 61 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 10 pF@32 MHz | typ 1 mA | 61 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 20 pF@32 MHz | typ 1.5 mA | 61 |
| Oscillator transconductance gm | Startup | min 10 mA/V | 61 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 61 |
| LSE current consumption IDD | low drive capability | typ 0.5 · max 0.9 uA | 62 |
| LSE current consumption IDD | medium-low drive capability | max 1 uA | 62 |
| LSE current consumption IDD | medium-high drive capability | max 1.3 uA | 62 |
| LSE current consumption IDD | high drive capability | max 1.6 uA | 62 |
| Oscillator transconductance gm | low drive capability | min 5 uA/V | 62 |
| Oscillator transconductance gm | medium-low drive capability | min 8 uA/V | 62 |
| Oscillator transconductance gm | medium-high drive capability | min 15 uA/V | 62 |
| Oscillator transconductance gm | high drive capability | min 25 uA/V | 62 |
| Startup time tSU(LSE) | VDDIOx is stabilized | typ 2 s | 62 |
| Frequency fLSI | VDDA = 3.3 V, TA = –40 to 105 °C | min 30 · typ 40 · max 50 kHz | 66 |
| LSI oscillator startup time tsu(LSI) | VDDA = 3.3 V, TA = –40 to 105 °C | max 85 us | 66 |
| LSI oscillator power consumption IDDA(LSI) | VDDA = 3.3 V, TA = –40 to 105 °C | typ 0.75 · max 1.2 uA | 66 |
| PLL input clock fPLL_IN | min 1 · typ 8 · max 24 MHz | 66 | |
| PLL input clock duty cycle fPLL_IN | min 40 · max 60 % | 66 | |
| PLL multiplier output clock fPLL_OUT | min 16 · max 48 MHz | 66 | |
| PLL lock time tLOCK | max 200 us | 66 | |
| Cycle-to-cycle jitter JitterPLL | max 300 ps | 66 | |
| 16-bit programming time tprog | TA = - 40 to +105 °C | min 40 · typ 53.5 · max 60 us | 66 |
| Page (1 KB) erase time tERASE | TA = - 40 to +105 °C | min 20 · max 40 ms | 66 |
| Mass erase time tME | TA = - 40 to +105 °C | min 20 · max 40 ms | 66 |
| Supply current IDD | Write mode; TA = –40 to 105 °C | max 10 mA | 66 |
| Supply current IDD | Erase mode; TA = –40 to 105 °C | max 12 mA | 66 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C, conforming to JESD22-A114; all packages; class 2 | max 2000 V | 69 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C, conforming to ANSI/ESD STM5.3.1; all packages; class C3 | max 250 V | 69 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 73 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 73 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | min 2.4 V | 73 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 1.3 V | 73 |
| Output low level voltage for an I/O pin VOL | |IIO| = 6 mA | max 0.4 V | 73 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 73 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 10 mA | max 0.4 V | 73 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF | max 2 MHz | 74 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF | max 125 ns | 74 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF | max 125 ns | 74 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF | max 10 MHz | 74 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF | max 25 ns | 74 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF | max 25 ns | 74 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 V | max 50 MHz | 74 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 V | max 30 MHz | 74 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2.7 V | max 20 MHz | 74 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 V | max 5 ns | 74 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 V | max 8 ns | 74 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2.7 V | max 12 ns | 74 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 V | max 5 ns | 74 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 V | max 8 ns | 74 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2.7 V | max 12 ns | 74 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF | max 2 MHz | 74 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF | max 12 ns | 74 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF | max 34 ns | 74 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 74 | |
| Analog supply voltage for ADC ON VDDA | min 2.4 · max 3.6 V | 76 | |
| Current consumption of the ADC IDDA (ADC) | VDDA = 3.3 V | typ 0.9 mA | 76 |
| ADC clock frequency fADC | min 0.6 · max 14 MHz | 76 | |
| Sampling rate fS | 12-bit resolution | min 0.043 · max 1 MHz | 76 |
| External trigger frequency fTRIG | fADC = 14 MHz, 12-bit resolution | max 823 kHz | 76 |
| External trigger frequency fTRIG | 12-bit resolution | max 17 1/fADC | 76 |
| Conversion voltage range VAIN | Maximum VDDA | min 0 V | 76 |
| External input impedance RAIN | See Equation 1 and Table 53 for details | max 50 kΩ | 76 |
| Sampling switch resistance RADC | max 1 kΩ | 76 | |
| Internal sample and hold capacitor CADC | max 8 pF | 76 | |
| Calibration time tCAL | fADC = 14 MHz | typ 5.9 us | 76 |
| Calibration time tCAL | typ 83 1/fADC | 76 | |
| Analog supply voltage for DAC ON VDDA | min 2.4 · max 3.6 V | 80 | |
| Resistive load with buffer ON RLOAD | Load connected to VSSA | min 5 kΩ | 80 |
| Resistive load with buffer ON RLOAD | Load connected to VDDA | min 25 kΩ | 80 |
| Impedance output with buffer OFF RO | Buffer OFF; minimum resistive load between DAC_OUT and VSS for 1% accuracy is 1.5 MΩ | max 15 kΩ | 80 |
| Capacitive load CLOAD | Maximum capacitive load at DAC_OUT pin when buffer is ON | max 50 pF | 80 |
| Lower DAC_OUT voltage with buffer ON DAC_OUT min | min 0.2 V | 80 | |
| Lower DAC_OUT voltage with buffer OFF DAC_OUT min | typ 0.5 mV | 80 | |
| DAC DC current consumption in quiescent mode IDDA | With no load, middle code (0x800) on the input | max 600 uA | 80 |
| DAC DC current consumption in quiescent mode IDDA | With no load, worst code (0xF1C) on the input | max 700 uA | 80 |
| Differential non linearity (Difference between two consecutive code-1LSB) DNL | DAC in 10-bit configuration; ±0.5 LSB | max 0.5 LSB | 80 |
| Differential non linearity (Difference between two consecutive code-1LSB) DNL | DAC in 12-bit configuration; ±2 LSB | max 2 LSB | 80 |
| Integral non linearity (difference between measured value at Code i and the value at Code i on a line drawn between Code 0 and last Code 1023) INL | DAC in 10-bit configuration; ±1 LSB | max 1 LSB | 80 |
| Integral non linearity (difference between measured value at Code i and the value at Code i on a line drawn between Code 0 and last Code 1023) INL | DAC in 12-bit configuration; ±4 LSB | max 4 LSB | 80 |
| Offset error (difference between measured value at Code (0x800) and the ideal value = VDDA/2) Offset | ±10 mV | max 10 mV | 80 |
| Offset error (difference between measured value at Code (0x800) and the ideal value = VDDA/2) Offset | DAC in 10-bit at VDDA = 3.6 V; ±3 LSB | max 3 LSB | 80 |
| Offset error (difference between measured value at Code (0x800) and the ideal value = VDDA/2) Offset | DAC in 12-bit at VDDA = 3.6 V; ±12 LSB | max 12 LSB | 80 |
| Thermal resistance junction-ambient ΘJA | UFQFPN32 - 5 × 5 mm | typ 38 °C/W | 112 |
Pins, by the datasheet
31- 2 PF0-OSC_IN
- PF0 I/O; OSC_IN oscillator input. · p. 31
- 3 PF1-OSC_OUT
- PF1 I/O; OSC_OUT oscillator output. · p. 31
- 4 NRST
- Active-low device reset input and internal reset output; embedded weak pull-up resistor. · p. 32
- 0 VSSA
- Analog ground. · p. 32
- 5 VDDA
- Analog power supply. · p. 32
- 6 PA0
- USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, ADC_IN0, COMP1_INM6, RTC_TAMP2 and WKUP1. · p. 32
- 7 PA1
- USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT, ADC_IN1 and COMP1_INP. · p. 32
- 8 PA2
- USART2_TX, TIM2_CH3, TIM15_CH1, COMP2_OUT, TSC_G1_IO3, ADC_IN2 and COMP2_INM6. · p. 32
- 9 PA3
- USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, ADC_IN3 and COMP2_INP. · p. 32
- 10 PA4
- SPI1_NSS, I2S1_WS, USART2_CK, TIM14_CH1, TSC_G2_IO1, ADC_IN4, COMP1_INM4, COMP2_INM4 and DAC_OUT1. · p. 32
- 11 PA5
- SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2, ADC_IN5, COMP1_INM5 and COMP2_INM5. · p. 32
- 1 VDD
- Digital power supply. · p. 36
- 12 PA6
- GPIO; SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT and ADC_IN6. · p. 33
- 13 PA7
- GPIO; SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT and ADC_IN7. · p. 33
- 14 PB0
- GPIO; TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT and ADC_IN8. · p. 33
- 15 PB1
- GPIO; TIM3_CH4, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 and ADC_IN9. · p. 33
- 16 PB2
- GPIO; TSC_G3_IO4. · p. 33
- 17 VDD
- Digital power supply. · p. 33
- 18 PA8
- GPIO; USART1_CK, TIM1_CH1, EVENTOUT and MCO. · p. 34
- 19 PA9
- GPIO; USART1_TX, TIM1_CH2, TIM15_BKIN and TSC_G4_IO1. · p. 34
- 20 PA10
- GPIO; USART1_RX, TIM1_CH3, TIM17_BKIN and TSC_G4_IO2. · p. 34
- 21 PA11
- GPIO; USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3 and EVENTOUT. · p. 34
- 22 PA12
- GPIO; USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4 and EVENTOUT. · p. 35
- 25 PA15
- GPIO; SPI1_NSS, I2S1_WS, USART2_RX, TIM2_CH1_ETR and EVENTOUT. · p. 35
- 26 PB3
- GPIO; SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1 and EVENTOUT. · p. 35
- 27 PB4
- GPIO; SPI1_MISO, I2S1_MCK, TIM3_CH1, TSC_G5_IO2 and EVENTOUT. · p. 35
- 28 PB5
- GPIO; SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN and TIM3_CH2. · p. 35
- 29 PB6
- GPIO; I2C1_SCL, USART1_TX, TIM16_CH1N and TSC_G5_IO3. · p. 36
- 30 PB7
- GPIO; I2C1_SDA, USART1_RX, TIM17_CH1N and TSC_G5_IO4. · p. 36
- 31 BOOT0
- Boot memory selection. · p. 36
- 32 PB8
- GPIO; I2C1_SCL, CEC, TIM16_CH1 and TSC_SYNC. · p. 36
Open-source boards using it
3- 6 layers98.6 × 88 mm

- 4 layers64.9 × 39.2 mm

HOLY ESC
0BAB1/HOLY_ESC
An open-source closed loop ESC PCB / Hardware platform. Based on a STM32F051 (Cortex M0 based) MCU. Tested using AM32 ESC software.
81 parts8 - 2 layers54 × 85.7 mm

STEAMGal STM32F051Kx
WRansohoff/STEAMGal_Tetris
Try writing some 'tetris' firmware for a development board with a very small display, a buzzer, and a few buttons. That should introduce a few core peripherals.
63 partsMIT
Parts like it
8MKL17Z64VFM4
QFN-32-EP(5x5)-40℃~+105℃ 1.71V~3.6V 16KB 16bit 28 32 Bit 48MHz 64KB ARM Cortex-M0+ Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)STM32L431KCU6
UFQFPN-32(5x5)-40℃~+85℃ 1.71V~3.6V 12bit 12bit 256KB 26 32 Bit 64KB 80MHz ARM Cortex-M4 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F031K6U6
UFQFPN-32(5x5)-40℃~+85℃ 12bit 27 2V~3.6V 32 Bit 32KB 48MHz 4KB ARM Cortex-M0 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F302K8U6
UFQFPN-32(5x5)-40℃~+85℃ 12bit 12bit 16KB 24 2V~3.6V 32 Bit 64KB 72MHz ARM Cortex-M4 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32L412KBU6
UFQFPN-32(5x5)-40℃~+85℃ 1.71V~3.6V 128KB 26 32 Bit 40KB 80MHz ARM Cortex-M4 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32H503KBU6
UFQFPN-32-EP(5x5)-40℃~+85℃ 1.71V~3.6V 128KB 24 250MHz 32 Bit 32KB ARM Cortex-M33 Built-in+External FLASH UFQFPN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G031K6U6
UFQFPN-32(5x5)-40℃~+85℃ 1.7V~3.6V 12bit 30 32 Bit 32KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G031K8U6
UFQFPN-32(5x5)-40℃~+85℃ 1.7V~3.6V 12bit 30 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32F051K8U6?
Yes. The symbol is MCU_ST_STM32F0:STM32F051K8Ux and the footprint Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F051K8U6?
UFQFPN-32(5x5), with 33 pins. Its footprint is drawn on this page.
Where is the STM32F051K8U6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F051K8U6?
JLCPCB lists it as part C72339, with 3,097 in stock; the sellers' links on this page open their listings.
What can replace the STM32F051K8U6?
Parts like it in the library: the MKL17Z64VFM4 by NXP Semiconductors, the STM32L431KCU6 by STMicroelectronics, the STM32F031K6U6 by STMicroelectronics and the STM32F302K8U6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F051K8U6?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.